You are browsing the IT site. Would you like to be redirected to another country or region to see content and products specific to your location?
US
Preventivo Rapido: Rohde & Schwarz FSW26 (1331.5003.26)
Rohde & Schwarz FSW26 (1331.5003.26)
Signal and Spectrum Analyzer; 2 Hz to 26.5 GHz
Modello
FSW26 (1331.5003.26)Famiglia di prodotti
RF & Microwave Spectrum AnalyzersProduttore
Rohde & SchwarzI modelli configurati contengono le seguenti caratteristiche:
RF & Microwave Spectrum AnalyzersSpectrum Analyzers-Performance20GHz <= 50GHzDC <= 1kHzBenchtopConfigurazioni
Specifiche chiave
Panoramica del prodotto
Risorse
Saremo felici di aiutarti a trovare la configurazione esatta
Utilizza "Preventivo rapido" e ti contatteremo per fornirti un preventivo per le tue esigenze.
Puoi anche contattarci, se preferisci, e i nostri esperti ti guideranno a trovare la giusta applicazione e soluzione di acquisto per questo prodotto.
Specifiche chiave
Indica le opzioni disponibili sullo strumento. Consultate la scheda Configurazioni per i dettagli dello strumento
| Attributo | Valore |
|---|---|
| High Frequency (range) | 20GHz <= 50GHz |
| Low Frequency (range) | DC <= 1kHz |
| Form Factor | Benchtop |
Panoramica del prodotto
The high-performance Rohde & Schwarz FSW signal and spectrum analyzer was developed to meet demanding customer requirements. Offering low phase noise, wide analysis bandwidth and straightforward and intuitive operation, the analyzer makes measurements fast and easy.
The high-performance FSW signal and spectrum analyzer helps engineers accomplish the most demanding tasks. Its wide internal analysis bandwidth allows the characterization of wideband components and communications systems. Its unparalleled phase noise facilitates the development of high-performance oscillators such as those used in radars. A state-of-the-art multitouch display with gesture support ensures straightforward and intuitive operation. An embedded SCPI recorder enables easy creation of executable scripts.
The FSW offers up to 8.3 GHz analysis bandwidth for measuring wideband-modulated or frequency agile signals like those used in the new 5G New Radio standard or in automotive and pulsed radars.
| Key Features |
| FSW Series frequency range from 2 Hz to 8/13.6/26.5/43.5/50/67 GHz (with external harmonic mixers from Rohde & Schwarz up to 110 GHz) |
| Low phase noise of –137 dBc (1 Hz) at 10 kHz offset (1 GHz carrier) |
| Up to 320 MHz analysis bandwidth |
| Real-time analysis up to 160 MHz bandwidth |
| High-resolution 12.1" (31 cm) touchscreen for convenient operation |
| Multiple measurement applications can be run and displayed in parallel |
| Unparalleled low phase noise and best sensitivity on the market |
| 8.3 GHz internal analysis bandwidth |
| 800 MHz real-time analysis bandwidth |
| SCPI recorder simplifies code generation |
| New flat Windows 10 design and multitouch gesture support |
| Benefits | |
| Superior RF Performance | The FSW redefines the top-of-the-line signal and spectrum analyzers, offering superior RF phase noise, displayed average noise level, intermodulation suppression and dynamic range for ACLR and harmonic measurements. |
| Advanced User Interface | 12.1" high resolution, multitouch display with gesture support - flat design with Windows 10 look and feel. Various measurements can be displayed simultaneously in separate windows, which makes result interpretation easier. Embedded SCPI recorder simplifies code generation for automatic, remote controlled measurements. |
| Keep up-to-date in 5G Development | The FSW scalable, wide internal analysis bandwidth of up to 8.3 GHz allows you to capture the entire bandwidth of the downlink signal and evaluate the complete system. FSW-K144 and FSW-K145 options cover downlink and uplink in-band measurements of 3GPP 5G NR. Each signal subframe is analyzed and a wide range of measurement results are provided, including the EVM, frequency and power of different channels and signals. |
| Extensive Radar Analysis Functions | In addition to wide analysis bandwidth (up to 8.3 GHz), FSW analysis functions essential for radar testing. The FSW-K6 pulse measurement application measures all relevant pulse parameters at the touch of a key. The FSW-K6S time sidlobe measurement option measures pulse compression parameters. The FSW-K60/K60H option analyzes frequency hopping signals. |
| Automotive Radar Signal Analysis | The FSW85 signal and spectrum analyzer features a YIG preselector for frequencies between 8 GHz and 85 GHz, providing image-free spectrum analysis. The wide analysis bandwidth (up to 8.3 GHz) combined with the FSW-K60/-K60C transient analysis/chirp measurement option allows you to characterize up to 5 GHz wide FMCW signals such as those used in automotive radars. |
| Ideal for Satellite RF Testing | The FSW offers dedicated measurement applications for the most critical measurements such as group delay, linearity, gain transfer, noise power ratio (NRP), etc. It also demodulates satellite RF signals of several standards such as DVB-S2X and OneWeb. The FSW scalable, wide analysis bandwidth (up to 8.3 GHz) meets the increasing demand for wide signal bandwidths. |
| Real-Time Spectrum Analysis | The FSW real-time options allow users to reliably detect extremely short sproadic interference in the nanosecond range even in close proximity to powerful carriers - in bandwidth of up to 800 MHz. Real-time spectrum analysis enables users to analyze existing frequency hopping algorithms and create alternative ones to prevent collisions between signals of different standards operating in the same frequency band. |
| Powerful Vector Signal Analysis Application | The FSW-K70 vector signal analysis option enables users t flexibly analyze digitally modulated single carriers down to the bit level. The clearly structured operating concept simplifies measurements despite a wide range of analysis tools. The FSW-K70M allows analysis of signals with two different modulation schemes, such as DVB-S2X signals. The FSW-K70P extension measures the raw bit error rate (BER) on PRBS data up to PRBS23. |
| Specifications | ||
| FSW Signal and Spectrum Analyzer | ||
| Frequency | ||
| Frequency range | FSW8 FSW13 FSW26 FSW43 FSW50 FSW67 FSW85 | 2 Hz to 8 GHz 2 Hz to 13.6 GHz 2 Hz to 26.5 GHz 2 Hz to 43.5 GHz 2 Hz to 50 GHz 2 Hz to 67 GHz 2 Hz to 85 GHz up to 90 GHz* (*with FSW-B90G option, YIG preselector = off) |
| Aging of frequency reference | 1 × 10–7/year | |
| with FSW-B4 option | 3 × 10–8/year | |
| Bandwidths | ||
| Resolution bandwidths | standard filter | 1 Hz to 10 MHz, 80 MHz (with FSW-B8 option) |
| RRC filter | 18 kHz (NADC) 24.3 kHz (TETRA) 3.84 MHz (3GPP) | |
| channel filter | 100 Hz to 5 MHz | |
| video filter | 1 Hz to 10 MHz | |
| I/Q demodulation bandwidth | 10 MHz | |
| with FSW-B28 option | 28 MHz | |
| with FSW-B40 option | 40 MHz | |
| with FSW-B80 option | 80 MHz | |
| with FSW-B160 option | 160 MHz | |
| with FSW-B320 option | 320 MHz | |
| with FSW-B512 option | 512 MHz | |
| with FSW-B1200 option | 1.2 GHz (1) | |
| with FSW-B2001 option | 2 GHz (1) | |
| with FSW-B4001 option | 4.4 GHz (2) | |
| with FSW-B6001 option | 6.4 GHz (3) | |
| with FSW-B8001 option | 8.3 GHz (3) | |
| with FSW-B2000 option | 2 GHz (4) | |
| with FSW-B5000 option | 5 GHz (5) | |
| Phase Noise | ||
| 10 kHz offset from carrier | 500 MHz carrier | –141 dBc (1 Hz) (typ.) |
| 1 GHz carrier | –140 dBc (1 Hz) (typ.) | |
| 10 GHz carrier | –133 dBc (1 Hz) (typ.) | |
| Displayed Average Noise Level (DANL) | ||
| 2 GHz | –156 dBm (1 Hz) (typ.) | |
| with FSW-B13 option | –159 dBm (1 Hz) (typ.) | |
| DANL with preamplifier (FSW-B24 option) | 2 GHz | –169 dBm (1 Hz) (typ.) |
| Intermodulation | ||
| Third-order intercept (TOI) | f < 1 GHz | +30 dBm (typ.) |
| f < 3 GHz | +25 dBm (typ.) | |
| 19 GHz to 26.5 GHz | +23 dBm (typ.) | |
| Total Measurement Uncertainty | 8 GHz | < 0.37 dB |
Notes:
(1) Not available for the FSW8 and FSW13.
(2)Available for the FSW43, FSW50, FSW67, FSW85.
(3)Available for the FSW43, FSW50, FSW67, FSW85 for f ≥ 18 GHz.
(4) 2 GHz demodulation bandwidth for frequencies > 5.5 GHz. RTO2044 digital oscilloscope required. Not available for the FSW8 and FSW13.
(5) Available for the FSW85 and FSW43 (RTO2064 oscilloscope required).
| Specifications | ||||
| FSW Signal and Spectrum Analyzer | ||||
| Model Overview | ||||
| Model | Order Number | Frequency Range | Phase Noise | Max. Analysis Bandwidth |
| FSW8 | 1331.5003.08 | 2 Hz - 8 GHz | < –136 dBc (1 Hz) (f = 1 GHz, 10 kHz offset) | 512 MHz |
| FSW13 | 1331.5003.13 | 2 Hz - 13.6 GHz | < –136 dBc (1 Hz) (f = 1 GHz, 10 kHz offset) | 512 MHz |
| FSW26 | 1331.5003.26 | 2 Hz - 26.5 GHz | < –136 dBc (1 Hz) (f = 1 GHz, 10 kHz offset) | 2000 MHz |
| FSW43 | 1331.5003.43 | 2 Hz - 43.5 GHz | < –136 dBc (1 Hz) (f = 1 GHz, 10 kHz offset) | 8312 MHz |
| FSW50 | 1331.5003.50 | 2 Hz - 50 GHz | < –136 dBc (1 Hz) (f = 1 GHz, 10 kHz offset) | 8312 MHz |
| FSW67 | 1331.5003.67 | 2 Hz - 67 GHz | < –136 dBc (1 Hz) (f = 1 GHz, 10 kHz offset) | 8312 MHz |
| FSW85 | 1331.5003.85 | 2 Hz - 85 GHz (with FSW-B90G option: 2 Hz - 90 GHz) | < –136 dBc (1 Hz) (f = 1 GHz, 10 kHz offset) | 8312 MHz |
| Specifications | ||
FSW Signal and Spectrum Analyzer | ||
| Model Overview | ||
| Model | Order Number | Description |
| FSW8 | 1331.5003.08 | Signal and Spectrum Analyzer, 2 Hz to 8 GHz |
| FSW13 | 1331.5003.13 | Signal and Spectrum Analyzer, 2 Hz to 13.6 GHz |
| FSW26 | 1331.5003.26 | Signal and Spectrum Analyzer, 2 Hz to 26.5 GHz |
| FSW43 | 1331.5003.43 | Signal and Spectrum Analyzer, 2 Hz to 43.5 GHz |
| FSW50 | 1331.5003.50 | Signal and Spectrum Analyzer, 2 Hz to 50 GHz |
| FSW67 | 1331.5003.67 | Signal and Spectrum Analyzer, 2 Hz to 67 GHz |
| FSW85 | 1331.5003.85 | Signal and Spectrum Analyzer, 2 Hz to 85 GHz (Frequency Range for FSW85 with FSW-B90G option: 2 Hz to 90 GHz (YIG preselector off)) |
Non riesci a trovare quello che cerchi?
Contattaci
