You are browsing the IT site. Would you like to be redirected to another country or region to see content and products specific to your location?

Rohde & Schwarz SMW200A (1412.0000.02)

Vector Signal Generator
Modello
SMW200A (1412.0000.02)
Famiglia di prodotti
RF & Microwave Signal Generators
Produttore
Rohde & Schwarz

I modelli configurati contengono le seguenti caratteristiche:

RF & Microwave Signal GeneratorsVector Signal GeneratorsBenchtop
Configurazioni
Specifiche chiave
Panoramica del prodotto
Risorse

Scegli la configurazione

Show:

Opzioni disponibili per Rohde & Schwarz SMW200A (1412.0000.02)

Opzione IDDescrizione
Frequency range: 100kHz to 12.75GHz for RF path A
Documentation of calibration values
Wideband baseband generator, 500 MHz RF bandwidth, 256 MSaemples, R&S®SMW-B13XT required, retrofittable in Rohde & Schwarz service (hardware option)
Baseband generator with realtime coder and ARB (64 MSamples), R&S®SMW-B13/B13T required, retrofittable in Rohde & Schwarz service (hardware option)
Signal routing and baseband main module, one I/Q path to RF section, retrofittable in factory only (hardware option)
Signal routing and baseband main module, two I/Q paths to RF section, retrofittable in factory only (hardware option)
Wideband baseband main module, two I/Q paths to RF section, nur im Werk nachrüstbar retrofittable only in factory (hardware option)
Fading simulator, R&S®SMW-B13/B13T and R&S®SMW-B10 required, retrofittable in Rohde & Schwarz service (hardware option)
Fading Simulator and signal processor, R&S®SMW-B13XT and R&S®SMW-B9 required, retrofittable in Rohde & Schwarz Service (hardware option)
FM/Phim modulator, frequency option (R&S SMW-B1xx/B2xx) and R&S SMW-B13T/B13XT required, retrofittable in factory only (hardware option)
Enhanced phase noise performance and FM/Phim modulator, frequency option (R&S SMW-B1xx/B2xx) and R&S SMW-B13T/B13XT required, retrofittable in factory only (hardware option)
Rear panel connectors for RF path A (3/6 GHz) and I/Q, R&S®SMW-B1003/B1006 required, retrofit only in Rohde & Schwarz service center with UCS (hardware option)
Phase coherence, retrofit in factory only (hardware option)
Solid state drive (hardware option)
Deeper chassis, prerequisite for R&S SMW-B2012, R&S SMW-B2031, R&S SMW-B2044, R&S SMW-B2044N, not installable post factory (hardware option)
Frequency range : 100kHz to 3GHz for RF path A,
Frequency range : 100kHz to 6GHz for RF path A, not installable post factory (hardware option)
Frequency range: 100 kHz to 7.5 GHz for RF path A, not installable post factory (hardware option)
Frequency range : 100kHz to 12.75GHz for RF path A, not installable post factory (hardware option)
Frequency range : 100kHz to 20GHz for RF path A, not installable post factory (hardware option)
Frequency range : 100 kHz to 31.8 GHz for RF path A, not installable post factory (hardware option)
Frequency range: 100 kHz to 40 GHz for RF path A, not installable post factory (hardware option)
100kHz to 44GHz Vector Signal Generator
Frequency range : 100kHz to 3GHz for RF path B, R&S SMW-B13T/B13XT required, retrofittable in factory only (hardware option)
Frequency range : 100kHz to 6GHz for RF path B, R&S SMW-B13T/B13XT required, retrofittable in factory only (hardware option)
Frequency range : 100kHz to 20GHz for RF path B, R&S SMW-B13T/B13XT required, retrofittable in factory only (hardware option)
Low phase noise for RF path A frequency option R&S®SMW-B10xx required, not installable post factory (hardware option)
Improved close in phase noise for RF path A, frequency option R&S®SMW-B10xx required, not installable post factory (hardware option)
Ultra low phase noise for RF path A, frequency option R&S®SMW-B10xx required
Improved close in phase noise for RF path B, R&S SMW-B710 in path A required, only installable together with frequency option R&S SMW-B20xx (hardware option)
Ultra low phase noise for RF path B, R&S SMW-B711 in path A required, only installable together with frequency option R&S SMW-B20xx (hardware option)
Frequency range: 100 kHz to 6 GHz for RF path A, not installable post factory (hardware option)
Frequency range: 100 kHz to 7.5 GHz for RF path A, not installable post factory (hardware option)
Frequency range: 100 kHz to 12.75 GHz for RF path A, not installable post factory (hardware option)
Frequency range: 100 kHz to 20 GHz for RF path A, not installable post factory (hardware option)
Frequency range: 100 kHz to 31.8 GHz for RF path A, not installable post factory (hardware option)
Frequency range: 100 kHz to 40 GHz for RF path A, not installable post factory (hardware option)
Frequency range: 100 kHz to 44 GHz for RF path A, not installable post factory (hardware option)
Frequency range: 100 kHz to 44 GHz for RF path A,I/Q modulation bandwidth max. 550 MHz (in RF), min. pulse width limited,
Frequency range: 100 kHz to 56 GHz for RF path A, not installable post factory (hardware option)
Frequency range: 100 kHz to 67 GHz for RF path A, not installable post factory (hardware option).
Frequency range: 100 kHz to 67 GHz for RF path A,I/Q modulation bandwidth max. 550 MHz (in RF), min. pulse width limited, not installable post factory (hardware option).
Frequency range: 100kHz to 6GHz for RF path B
Frequency range: 100 kHz to 7.5 GHz for RF path B, frequency option R&S�SMW-B1007 and R&S�SMW-B13T/B13XT required, not installable post factory (hardware option)
Frequency range: 100 kHz to 20 GHz for RF path B, frequency option R&S SMW-B10xx and R&S SMW-B13T/B13XT required, not installable post factory (hardware option)
Frequency range: 100 kHz to 44 GHz for RF path B, R&S SMW-B94L and R&S SMW-B13T/-B13XT required, not installable post factory (hardware option)
Differential analog I/Q outputs, R&S®SMW-B13/B13T required (software license)
Wideband differential analog I/Q outputs (R&S®SMW-B13XT required) (software license)
Digital baseband output, R&S®SMW-B13/B13T required (software license)
Digital baseband output for R&S®SMW wideband baseband R&S®SMW-B13XT required (software license)
Pulse modulator, frequency option R&S®SMW-B10xx/-B20xx required (software license)
High performance pulse generator, R&S®SMW-B13/B13T/B13XT required (software license)
Multi function generator, R&S®SMW-B13/B13T/B13XT required (software license)
GSM/EDGE, R&S®SMW-B9/B10 required (software license)
EDGE Evolution, R&S®SMW-K40 required (software license)
3GPP FDD, R&S®SMW-B9/B10 required (software license)
IEEE 802.16, R&S®SMW-B10 required (software license)
TD-SCDMA, R&S®SMW-B9/B10 required (software license)
TD-SCDMA enhanced BS/MS tests R&S®SMW-K50 required (software license)
IEEE 802.11a/b/g/n/j/p, R&S®SMW-B9/B10 required (software license)
EUTRA/LTE Release 8, R&S®SMW-B9/B10 required (software license)
Bluetooth® including Enhanced Data Rate, R&S®SMW-B9/B10 required (software license)
Multi carrier CW signal generation, R&S®SMW-B9/B10 required (software license)
Additional white Gaussian noise, R&S®SMW-B13/B13T/B13XT required (software license)
EUTRA/LTE closed-loop BS test, HARQ feedback, timing adjustment R&S®SMW-K55 required (software license)
Dynamic fading, R&S®SMW-B14 required (software license)
Enhanced fading models including Gauss- and Watterson-fading, R&S®SMW-B14 required (software license)
MIMO fading and routing, R&S®SMW-B13T, 2x R&S®SMW-B10 and 2x R&S®SMW-B14 or R&S®SMW-B13XT, 2x R&S®SMW-B9 and 2x R&S®SMW-B15 required (software license)
Multiple Entities, enables >2 baseband entities, 2x R&S®SMW-B10 and R&S®SMW-B13T or 2x R&S®SMW-B9 and R&S®SMW-B13XT required (software license)
Logfile generation; intermediate results and logfiles of the signal generation process, R&S SMW-K55 or R&S SMW-K115 or R&S SMW-K144required (software license)
EUTRA/LTE Release 9 and enhanced features, R&S®SMW-K55 required (software license)
EUTRA/LTE Release 10 (LTE Advanced), R&S®SMW-K55 required (software license)
IEEE 802.11ac R&S®SMW-K54 required (software license)
LTE Release 11 + enhanced features, R&S®SMW-K55 required (software license)
EUTRA/LTE Release 12
5G Air interface candidate
DVB-S2/DVB-S2X R&S®SMW-B9/B10 required (software license)
Verizon 5GTF Signals R&S SMW-B9/B10 required (software license)
IEEE 802.11ad R&S®SMW-B9 and R&S®SMW-K527 required (software license)
Digital Standard IEEE 802.11ax R&S®SMW-K54 required (software license)
5G New radio
5G NR Closed-Loop BS Test R&S®SMW-K144 required (software license)
5G New Radio Release 16 for R&S®SMW200A R&S®SMW-K144 required (software license)
Pulse sequencing external PC software required R&S®SMW-B9/B10 required (software license)
Enhanced pulse sequencing external PC software required (R&S®SMW-K300 required) (software license)
Digital Standard IEEE 802.11ax R&S®SMW-K254 and R&S®WinIQSIM2 required (software license)
Wideband Extended Sequencing for R&S®SMW-B9 (R&S®SMW-B9 erforderlich) (Software-Lizenz)
Realtime Control Interface (R&S SMW-K502 required) (software license)
HS upgrade PDW streaming
ARB memory extension to 512 MSamples, R&S®SMW-B10 required (software license)
ARB memory extension to 1 GSamples, R&S®SMW-B10 and R&S®SMW-K511 required (software license)
ARB memory extension to 2 Gsamples, R&S®-SMW-B9 required (software license)
Baseband extension to 160MHz RF bandwidth, R&S®SMW-B10 required (software license)
Baseband extension to 1 GHz RF bandwidth, R&S®SMW-B9 required (software license)
Baseband extension to 2 GHz RF bandwidth, R&S®SMW-B9 required (software license)
Baseband extension from 1 GHz to 2 GHz RF bandwidth, R&S®SMW-B9 and R&S®SMW-K525 required (software license)
Envelope tracking, R&S®SMW-B9/B10 and R&S®SMW-K17/K16 required (software license)
AM/AM, AM/PM Predistortion, R&S®SMW-B9/B10 and correspondent RF path required (software license)
User defined frequency response correction
Automated RF Port alignmt
Digital Doherty for Doherty Amplifier Development
External frontend control
100 MHz, 1 GHz ultra low noise reference input/output, frequency option R&S®SMW-B10xx required.
Flexible reference input (1 MHz to 100 MHz), frequency option R&S®SMW-B10xx required.
AM / FM / PhiM, frequency option R&S®SMW-B10xx/-B20xx and R&S®SMW-B13T/-B13XT required (software license)
Differential analog I/Q inputs for RF path A, frequency option R&S®SMW-B10xx required.
customized Dynamic Fading (requires K71)
19" adapter BW2010, cabinet 4HU 1/1

Sono visualizzati 1 - 6 su 122 risultati

1
2
21
1

Vector signal generator, base unit

ID prodotto: P-653709

SMW-B13 (1413.2807.02) • Signal routing and baseband main module, one I/Q path to RF section, retrofittable in factory only (hardware option)SMW-B140 (1413.0604.02) • Frequency range: 100 kHz to 40 GHz for RF path A, not installable post factory (hardware option)SMW-K522 (1413.6960.02) • Baseband extension to 160MHz RF bandwidth, R&S®SMW-B10 required (software license)SMW-B10 (1413.1200.02) • Baseband generator with realtime coder and ARB (64 MSamples), R&S®SMW-B13/B13T required, retrofittable in Rohde & Schwarz service (hardware option)
Noleggio

Confermato nel preventivo

Preventivo

Usato

Disponibilità confermata nel preventivo

126.019,00 €*197.799,00 €

Soluzioni Finanziarie

Chiedi maggiori informazioni ora per saperne di più

2

Vector signal generator, 20GHz

ID prodotto: P-181181

SMW-K144 (1414.4990.02) • 5G New radioSMW-B13XT (1413.8005.02) • Wideband baseband main module, two I/Q paths to RF section, nur im Werk nachrüstbar retrofittable only in factory (hardware option)SMW-B9 (1413.7350.02) • Wideband baseband generator, 500 MHz RF bandwidth, 256 MSaemples, R&S®SMW-B13XT required, retrofittable in Rohde & Schwarz service (hardware option)SMW-K55 (1413.4180.02) • EUTRA/LTE Release 8, R&S®SMW-B9/B10 required (software license)SMW-B1020 (1428.5107.02) • Frequency range: 100 kHz to 20 GHz for RF path A, not installable post factory (hardware option)
Noleggio

Confermato nel preventivo

Preventivo

Usato

Unità disponibili

93.680,00 €*169.853,00 €

Soluzioni Finanziarie

Chiedi maggiori informazioni ora per saperne di più

3

Vector signal generator, base unit, frequency option for RF path A (R&S®SMW-B1003/B1006/B1007/B1012)

ID prodotto: P-181179

SMW-K55 (1413.4180.02) • EUTRA/LTE Release 8, R&S®SMW-B9/B10 required (software license)SMW-K42 (1413.3784.02) • 3GPP FDD, R&S®SMW-B9/B10 required (software license)SMW-B13XT (1413.8005.02) • Wideband baseband main module, two I/Q paths to RF section, nur im Werk nachrüstbar retrofittable only in factory (hardware option)SMW-K144 (1414.4990.02) • 5G New radioSMW-B9 (1413.7350.02) • Wideband baseband generator, 500 MHz RF bandwidth, 256 MSaemples, R&S®SMW-B13XT required, retrofittable in Rohde & Schwarz service (hardware option)SMW-B1020 (1428.5107.02) • Frequency range: 100 kHz to 20 GHz for RF path A, not installable post factory (hardware option)
Noleggio

Confermato nel preventivo

Preventivo

Usato

Unità disponibili

116.622,00 €*177.079,00 €

Soluzioni Finanziarie

Chiedi maggiori informazioni ora per saperne di più

4

Vector signal generator, base unit, frequency option for RF path A (R&S®SMW-B1003/B1006/B1007/B1012)

ID prodotto: P-215782

SMW-B206 (1413.0904.02) • Frequency range : 100kHz to 6GHz for RF path B, R&S SMW-B13T/B13XT required, retrofittable in factory only (hardware option)SMW-B9 (1413.7350.02) • Wideband baseband generator, 500 MHz RF bandwidth, 256 MSaemples, R&S®SMW-B13XT required, retrofittable in Rohde & Schwarz service (hardware option)SMW-B22 (1413.2207.02) • Enhanced phase noise performance and FM/Phim modulator, frequency option (R&S SMW-B1xx/B2xx) and R&S SMW-B13T/B13XT required, retrofittable in factory only (hardware option)SMW-K525 (1414.6129.02) • Baseband extension to 1 GHz RF bandwidth, R&S®SMW-B9 required (software license)SMW-B13XT (1413.8005.02) • Wideband baseband main module, two I/Q paths to RF section, nur im Werk nachrüstbar retrofittable only in factory (hardware option)SMW-K61 (1413.4280.02) • Multi carrier CW signal generation, R&S®SMW-B9/B10 required (software license)
Noleggio

Confermato nel preventivo

Preventivo

Usato

Disponibilità confermata nel preventivo

192.412,00 €*304.437,00 €

Soluzioni Finanziarie

Chiedi maggiori informazioni ora per saperne di più

5

Vector signal generator, base unit, frequency option for RF path A (R&S®SMW-B1003/B1006/B1007/B1012)

ID prodotto: P-215780

SMW-B9 (1413.7350.02) • Wideband baseband generator, 500 MHz RF bandwidth, 256 MSaemples, R&S®SMW-B13XT required, retrofittable in Rohde & Schwarz service (hardware option)SMW-B90 (1413.5841.02) • Phase coherence, retrofit in factory only (hardware option)SMW-K515 (1413.9360.02) • ARB memory extension to 2 Gsamples, R&S®-SMW-B9 required (software license)SMW-B206 (1413.0904.02) • Frequency range : 100kHz to 6GHz for RF path B, R&S SMW-B13T/B13XT required, retrofittable in factory only (hardware option)SMW-B106 (1413.0104.02) • Frequency range : 100kHz to 6GHz for RF path A, not installable post factory (hardware option)SMW-B13XT (1413.8005.02) • Wideband baseband main module, two I/Q paths to RF section, nur im Werk nachrüstbar retrofittable only in factory (hardware option)
Noleggio

Confermato nel preventivo

Preventivo

Usato

Disponibilità confermata nel preventivo

145.610,00 €*252.893,00 €

Soluzioni Finanziarie

Chiedi maggiori informazioni ora per saperne di più

6

Vector signal generator, base unit, frequency option for RF path A (R&S®SMW-B1003/B1006/B1007/B1012)

ID prodotto: P-215752

SMW-B9 (1413.7350.02) • Wideband baseband generator, 500 MHz RF bandwidth, 256 MSaemples, R&S®SMW-B13XT required, retrofittable in Rohde & Schwarz service (hardware option)SMW-K526 (1413.9318.02) • Baseband extension to 2 GHz RF bandwidth, R&S®SMW-B9 required (software license)SMW-K544 (1414.3707.02) • User defined frequency response correctionSMW-K61 (1413.4280.02) • Multi carrier CW signal generation, R&S®SMW-B9/B10 required (software license)SMW-B206 (1413.0904.02) • Frequency range : 100kHz to 6GHz for RF path B, R&S SMW-B13T/B13XT required, retrofittable in factory only (hardware option)SMW-B13XT (1413.8005.02) • Wideband baseband main module, two I/Q paths to RF section, nur im Werk nachrüstbar retrofittable only in factory (hardware option)
Noleggio

Confermato nel preventivo

Preventivo

Usato

Disponibilità confermata nel preventivo

113.812,00 €*257.879,00 €

Soluzioni Finanziarie

Chiedi maggiori informazioni ora per saperne di più

Sono visualizzati 1 - 6 su 122 risultati

1
2
21
* Prezzi e disponibilità sono soggetti a modifiche senza preavviso. Tutti i prezzi possono variare a causa dei termini di spedizione, IVA o imposta sulle vendite, dazi doganali e tassi di cambio. I prodotti potrebbero non essere disponibili in tutte le località. Qualsiasi risparmio elencato si basa sul prezzo di listino completo di nuovi strumenti; i risparmi effettivi possono variare in base alle opzioni, alla configurazione, ai tassi di cambio e ad altri fattori. La garanzia può variare in base alla categoria o al prodotto specifico disponibile. Tutti i termini devono essere confermati da una quotazione scritta.

Non riesci a trovare quello che cerchi?

Contattaci
Non riesci a trovare quello che cerchi?
loader
loader logo