Keysight Technologies (formerly Agilent) N4002A | 10MHz-26.5GHz Noise Source | Electro Rent

Opzione ID	Descrizione
DEMACC	Demo Accessories
N4002A-002	5-foot (1.5 m) SNS noise source cable
N4002A-A6J	ANSI Z540 compliant calibration with test data
N4002A-ABA	U.S. - English localization
N4002A-H06	SNS with APC 3.5mm male connector, 5 dB nominal ENR
R-50C-011-3	Calibration Assurance Plan - Return to Keysight - 3 years
R-50C-011-5	Calibration Assurance Plan - Return to Keysight - 5 years
R-50C-011-MU-3	Keysight Calibration + Uncertainties 3 years
R-50C-011-MU-5	Keysight Calibration + Uncertainties 5 years
R-50C-021-3	ANSI Z540-1-1994 Calibration - 3 years
R-50C-021-5	ANSI Z540-1-1994 Calibration - 5 years
R-51B-001-3C	Return to Keysight Warranty - 3 years
R-51B-001-5C	Warranty Assurance Plan - Return to Keysight - 5 years

Attributo	Valore
High Frequency (range)	20GHz <= 50GHz

Panoramica del prodotto

The SNS series N4002A noise source was designed to measure DUT noise figures reliably and accurately up to 30 dB from 10 MHz to 26.5 GHz. This noise source comes with an APC 3.5 connector as standard.

Key Features

Electronic storage of Excess Noise Ratio (ENR) calibration data decreases the opportunity for user error

Automatic download of ENR data to the NFA speeds overall set-up time

Temperature compensation improves measurement accuracy leading to tighter specification of device performance

3.5mm connector ships standard, optional Type-N connector is available as Option 001

Requires SNS cable for operation. 11730A

Specifications
N4002A SNS Series Noise Source
Feature	Parameter
ENR Automatic Download	Yes
Excess Noise Ratio (ENR)	12-17 dB
Maximum Frequency Range	26 GHz
Minimum Frequency Range	10 MHz
Temperature Compensation	Yes
Works with	NFA ESA-E Series X-Series (PXA, MXA, EXA, CXA)

Specifications
SNS Series Noise Sources
Model Overview
Model	Description
N4000A (for Low Noise Figure or Mismatch Sensitive Devices Up to 18 GHz)	The N4000A is designed to accurately measure devices with low noise figure, or devices whose gain is especially sensitive to small changes in source impedance. This includes most GaAs FET’s. The N4000A maintains the same impedance whether turned on or off. By maintaining the same impedance at the input to the device under test (DUT) gain changes are reduced. These gain changes can often masquerade as DUT noise and cause noise figure measurement errors. The ENR of this noise source is nominally 6 dB from 10 MHz to 18 GHz. DUTs with noise figures up to 20 dB can be accurately and reliably measured with this device. The N4000A noise source has a choice of connectors, with an APC 3.5 (m) as standard.
N4001A (for General Purpose Measurements from 10 MHz to 18 GHz)	The N4001A noise source is ideal for general purpose use with a low reflection coefficient and a nominal ENR of 15 dB from 10 MHz to 18 GHz. DUT’s with noise figures up to 30 dB can be measured accurately and reliably with this device. The N4001A has a selection of connectors, with an APC 3.5 (m) as standard.
N4002A (for Measurements Up to 26.5 GHz)	The N4002A noise source was designed to measure DUT noise figures reliably and accurately up to 30 dB from 10 MHz up to 26.5 GHz accurately and reliably. This noise source comes with an APC 3.5 connector as standard.

Specifications
SNS Series Noise Source
Model Overview
Model	Frequency Range	ENR Range
N4000A	10 MHz to 18 GHz	4.5 - 6.5 dB
N4001A	10 MHz to 18 GHz	14 - 16 dB
N4002A	10 MHz to 26.5 GHz	12 - 17 dB