You are browsing the IT site. Would you like to be redirected to another country or region to see content and products specific to your location?

Preventivo Rapido: Amplifier Research 75S1G6C

+39 0292 392 801Hai bisogno di assistenza? Parla con i nostri esperti.

Amplifier Research 75S1G6C

Solid State Amplifier; 75W CW, 1GHz - 6GHz

Modello

75S1G6C

Famiglia di prodotti

RF & Microwave Power

Produttore

Amplifier Research

I modelli configurati contengono le seguenti caratteristiche:

RF & Microwave PowerNoise & OtherAmplifiers > 1GHz

Configurazioni

Specifiche chiave

Panoramica del prodotto

Risorse

Saremo felici di aiutarti a trovare la configurazione esatta

Utilizza "Preventivo rapido" e ti contatteremo per fornirti un preventivo per le tue esigenze.

Puoi anche contattarci, se preferisci, e i nostri esperti ti guideranno a trovare la giusta applicazione e soluzione di acquisto per questo prodotto.

Panoramica del prodotto

The Model 75S1G6C is a solid-state, Class A design, self-contained, air-cooled, broadband power amplifier designed for applications where instantaneous bandwidth, high gain, and linearity are required. It will provide a minimum of 75 W across its operating bandwidth. Protection from input overdrive beyond 0 dBm is provided as well as protection from various failure conditions including over-temperature and power supply faults.

Key Features

75 Watts CW, 1.0 - 6.0 GHz

Class A design

100% mismatch tolerant

Built-in fault monitoring and protection

Remote control: Ethernet, USB, GPIB, fiber-optic serial, RS-232

Modular design for easy maintenance and service

Low acoustical noise

Benefits
Front Panel Display	A front panel display indicates the operational status and fault conditions. All amplifier control functions, and status indications are available remotely using GPIB/IEEE-488, RS-232, fiber-optic serial, USB, or Ethernet. Interface connectors are located on the back panel. Local and remote operation is managed by a switch on the front panel.
Multiple Purpose Amplifier	This is a multiple purpose amplifier. The low level of spurious signals and linearity make it ideal for use as a driver in testing wireless and communication components and subsystems. By covering such a wide bandwidth, it is suitable for 5G testing applications. Due to the Class A design, it is also suitable for EMC Test applications where continued operation into high VSWR loads including open and short circuits is required.
Export Classification	The export classification for this equipment is 3A001. These commodities, technology or software are controlled for export in accordance with the U.S. Export Administration Regulations. Diversion contrary to U.S. law is prohibited.

Applications

EMC (military, aviation, automotive, commercial)

Radiated and conducted EMC testing

General purpose, antenna, and component testing

Specifications
75S1G6C Solid State Amplifier
Feature	Symbol	Minimum	Typical	Maximum
Rated Power Output	PSAT	75W	85W	>125W
Input for Rated Output	Pin	--	--	1.0mW 0dBm
Power Output @ 1 dB Compression	P1dB	50W	70W	>100W
Power Output @ 3 dB Compression	P3dB	65W	85W	>120W
Operating Frequency	BW	1.0GHz	--	6.0GHz
Gain (Small Signal)		51dB	54dB	56dB
Gain Reduction Adjustment (when below compression)		10dB	12dB	15dB
Flatness	∆G	--	±1.5dB	±2.5dB
Input Impedance	Z in	--	50Ω 1.5:1 VSWR	-- 2.0:1 VSWR
Output Impedance	Z out	--	50Ω	--
3rd Order Intercept	IP3	--	+56dBm	--
Noise Figure	NF	--	10dB	--
Harmonic Distortion @ 75 W (for entire band except 2 - 3 GHz)	H2, H3	--	-30dBc	-20dBc
Harmonic Distortion @ 75 W (for 2 – 3 GHz)	H2, H3	--	-22dBc	-18dBc
Spurious		--	-73dBc	--
Power Consumption	PD	--	--	450W

Specifications

75S1G6C

Solid State Amplifier

Feature

Parameter

Mechanical

Dimensions

(With Cabinet) (W x H x D)

51.0 x 17.0 x 65.3cm

20.1 x 6.7 x 25.7in

Dimensions

(No Cabinet) – 3U for 19” Rack

48.3 x 13.4 x 65.3cm

19.0 x 5.3 x 25.7in

Weight

(With Cabinet)

26.5kg

58.5lb

Weight

(No Cabinet)

15.8kg

34.75lb

Cooling

Forced air (self-contained fans)

Side inlets / rear outlet Δt = +7°C (typical)

Acoustical Noise

(Measured @ 1 meter from the front)

56dBA (typical)

Regulatory Compliance

EMC:

EN 61326-1

Safety:

UL 61010-1

CAN/CSA C22.2 #61010-1

CENELEC EN 61010-1

RoHS:

Directive 2011/65/EU

Export:

3A001

Connector Interfaces

RF input: N female (50 Ω)

RF output: N female (50 Ω)

IEEE-488: 24-pin female

RS-232: 9-pin subminiature D female

RS-232 (fiber optic): ST

USB 2.0: Type B

Ethernet: RJ-45

Interlock: 15-pin subminiature D female

AC: C14

Non riesci a trovare quello che cerchi?

Contattaci

Preventivo Rapido: Amplifier Research 75S1G6C

Amplifier Research 75S1G6C

Modello

Famiglia di prodotti

Produttore

Saremo felici di aiutarti a trovare la configurazione esatta

Specifiche chiave

Panoramica del prodotto

Contenuti

Risorse file

Non riesci a trovare quello che cerchi?