DPO70000SX Series oscilloscopes provide the most accurate real time performance for ultra-bandwidth applications.
Low noise, high fidelity signal acquisition is critical in ultra-bandwidth applications such as long-haul coherent optical, 400G datacom and wideband RF. The flagship DPO77002SX model uses ATI (Asynchronous Time Interleaving) architecture to achieve 70 GHz and 200 GS/s (5 ps/Sample) real time acquisition performance. This patented, symmetric architecture elegantly creates an inherent noise advantage over legacy bandwidth interleaving methods.
The DPO70000SX provides the lowest noise, highest fidelity and maximum performance for complex optical modulation analysis, jitter and noise analysis of high speed serial signaling and frequency, phase and modulation analysis of wideband RF signals.
Key Features |
Low noise, 70 GHz real time signal capture using patented ATI architecture |
Compact 5 ¼" (3U) instrument package for the most versatile multi-channel systems |
Precise, scalable performance using UltraSync multi-unit time synchronization bus |
Highest trigger performance with >25 GHz Edge trigger bandwidth, unique Envelope trigger |
14.1 Gbps hardware serial trigger - Assures triggering on the first instance of a specified 8b/10b, 64b/66b, or generic NRZ pattern to allow isolation of pattern-dependent effects |
Bit error detector - Implemented within the trigger system, this feature provides simple bit error measurement against a defined pattern file, with no missed bits |
Applications |
Coherent optical modulation analysis |
Research and defense data acquisition and analysis |
100G/400G datacom system debug |
PCIe debugging and compliance testing |
High-speed serial communications debugging and compliance testing PCIe, USB, Thunderbolt, HDMI, DisplayPort, and more |
Specifications |
|
DPS75004SX |
|
Feature | Parameter |
Analog Channels/Bandwidth | 4 ch/33 GHz |
Sample Rate per Channel | 100 GS/s |
Rise Time (Typical | 10% to 90%: 13 ps
20% to 80%: 9 ps
|
Vertical Noise
(% of full scale), BWE on, Max. Sample Rate (Typical)
| 0.71% of full scale
0.56% of full scale @ 0 V offset (500 mVFS)
|
Record Length, Points
(each channel, standard)
| 62.5 M |
Record Length
(each channel, Opt. 10XL)
| 125 M |
Record Length
(each channel, Opt. 20XL)
| 250 M |
Record Length
(each channel, Opt. 50XL)
| 1 G |
Timing Resolution | 10 ps (100 GS/s) |
Duration at Highest Sample Rate
(Standard)
| 625 µs |
Duration at Highest Sample Rate
(Opt. 10XL)
| 1.25 ms |
Duration at Highest Sample Rate
(Opt. 20XL)
| 2.5 ms |
Duration at Highest Sample Rate
(Opt. 50XL)
| 10 ms |
Power Consumption | Specifications Power Source
<980 W, single instrument, maximum
≤780 W, single unit (typical)
|
Source Voltage and Frequency | 100 V to 240 Vrms, 50/60 Hz
115 V ±10%, 400 Hz
CAT II
|
Operating Temperature | +5 °C to +45 °C
41 °F to +113 °F
with 11 °C per hour maximum gradient, noncondensing, derated 1 °C per 300 meters (984.25 feet) above 1500 meters (4921.25 feet) altitude
|
Non Operating Temperature | -20 °C to +60 °C
-4 °F to +140 °F
with 20 °C/hour maximum gradient
|
Operating Humidity | 8% to 80% relative humidity at up to +32 °C (+90 °F)
5% to 45% relative humidity above +32 °C (+90 °F) up to +45 °C (+113 °F),
noncondensing, and is limited by a maximum wet-bulb temperature of +29.4 °C (+85 °F) (derates relative humidity to 32% at +45 °C (+113 °F)
|
Specifications |
|
DPO70000SX Series
Scalable Performance Oscilloscopes
|
|
System Overview |
|
Model | Description |
DPS77004SX | 70 GHz ATI Performance Oscilloscope System:
2 x 70 GHz, 200 GS/s or 4 x 33 GHz, 100 GS/s
|
DPS75904SX | 59 GHz ATI Performance Oscilloscope System:
2 x 59 GHz, 200 GS/s or 4 x 33 GHz, 100 GS/
|
DPS75004SX | 50 GHz ATI Performance Oscilloscope System:
2 x 50 GHz, 200 GS/s or 4 x 33 GHz, 100 GS/s
|
DPS73308SX | 33 GHz Digital Phosphor Oscilloscope System:
4 x 33 GHz, 100 GS/s or 8 ⁴ x 23 GHz, 50 GS/s
|
Note:
The above DPS systems provide single-nomenclature ordering convenience for 2 instruments and a 1 meter UltraSync cable.
The same options may be applied to these systems as with base models and the option will be included on both instruments.
Both component instruments will have the same options associated with the system nomenclature when operating standalone.
Specifications |
|
DPO70000SX Series
Scalable Performance Oscilloscopes
|
|
Model Overview |
|
Model | Description |
DPO77002SX | 70 GHz ATI Performance Oscilloscope |
DPO75902SX | 59 GHz ATI Performance Oscilloscope |
DPO75002SX | 50 GHz ATI Performance Oscilloscope |
DPO73304SX | 33 GHz Digital Phosphor Oscilloscope |
DPO72304SX | 23 GHz Digital Phosphor Oscilloscope |
DPO71604SX | 16 GHz Digital Phosphor Oscilloscope |
DPO71304SX | 13 GHz Digital Phosphor Oscilloscope |