MPI T26VP-GSG200

Precisely manufactured, the MPI TITAN™ Probes incorporate perfectly-matched 50 Ω MEMS contact tips.

They ensure unmatched calibration and measurement results over a widest frequency range thanks to superior probe electrical characteristics (minimal insertion loss and crosstalk as well as high return loss).

Unlike any other tips on the market, MPI TITAN™ RF probes deliver an excellent and real time visibility of the tip contacts due to the unique protrusion tip design.

For the first time, highly accurate positioning of the RF probe on calibration standards or DUT pads became possible even for unexperienced operators and without using probe alignment marks.

MPI Corporation expands the family of the RF TITAN Probe by introducing the TITAN-RC Probe.

The new probe model features the contact tip width reduced by 33% down to 20 μm.

Fully aligned with the industry trend towards further reduction of the pad size for RF devices and ICs, the TITAN-RC probe significantly reduces cost of test for next generation commercial RF and mm-wave silicon devices and ICs.

It enables accurate, and reproducible measurement results obtained for Si devices with Al pad metallization as small as 30 x 35 μm.

TITAN-RC probes are available in GSG tips configuration with probe pitch from 50 μm to 150 μm.

One of the strongest features of TITAN™ Probe technology is its uniform wear-out: after hundreds of thousands probe cycles, the length of the probe tip naturally shrinks.

The electrical characteristics, however, remain unchanged due to the unique probe design.

Thus, the life time of TITAN™ Probes outperforms the life time of comparable probe technologies.

T26

(26 GHz Probe)

Typical Electrical Characteristics:

Characteristic Impedance: 50 Ω

Frequency Range: DC to 26 GHz

Insertion Loss: (GSG configuration)¹: < 0.4 dB

Return Loss (GSG configuration)¹: > 16 dB

DC Current: ≤ 1 A

DC Voltage: ≤ 100 V

RF Power, @10 GHz: ≤ 5 W

Mechanical Characteristics:

Connector: SMA

Pitch Range: 50 µm to 1250 µm

Standard Pitch Step:

from 50 µm to 450 µm; 25 µm step

from 500 µm to 1250 µm; 50 µm step

Available for 90 µm pitch

Tip Configurations: GSG, GS, SG

Connector Angle:

V-Style: 90-degree

A-Style: 45-degree

T26P

(26 GHz Probe)

Typical Electrical Characteristics:

Characteristic Impedance: 50 Ω

Frequency Range: DC to 26 GHz

Insertion Loss (GSG configuration)¹: < 0.4 dB

Return Loss (GSG configuration)¹: > 16 dB

DC Current: ≤ 2 A

DC Voltage: ≤ 250 V

RF Power, @10 GHz: ≤ 10 W

Thermal Range: -60 to 200 °C

Mechanical Characteristics:

Connector: SMA

Pitch Range:

50 to 375 µm

25 µm step

Available for 90 µm pitch

Standard Pitch Step:

from 50 µm to 450 µm; 25 µm step

from 500 µm to 1250 µm; 50 µm step

Available for 90 µm pitch

Tip Configurations: GSG

Connector Angle:

V-Style: 90-degree

A-Style: 45-degree

T40

(40 GHz Probe)

Typical Electrical Characteristics:

Characteristic Impedance: 50 Ω

Frequency Range: DC to 40 GHz

Insertion Loss (GSG configuration)¹: < 0.6 dB

Return Loss (GSG configuration)¹: > 18 dB

DC Current: ≤ 1 A

DC Voltage: ≤ 100 V

RF Power, @10 GHz: ≤ 5 W

Mechanical Characteristics:

Connector: K (2.92 mm)

Pitch Range: 50 µm to 500 µm

Standard Pitch Step:

(For GSG configuration)

from 50 µm to 450 µm; 25 µm step

from 500 µm to 800 µm; 50 µm step

Available for 90 µm pitch

Standard Pitch Step:

(For GS/SG configuration)

from 50 µm to 450 µm; 25 µm step

Available for 90/500 µm pitch

Tip Configurations: GSG, GS, SG

Connector Angle:

V-Style: 90-degree

A-Style: 45-degree

T50

(50 GHz Probe)

Typical Electrical Characteristics:

Characteristic Impedance: 50 Ω

Frequency Range: DC to 50 GHz

Insertion Loss (GSG configuration)¹: < 0.6 dB

Return Loss (GSG configuration)¹: > 17 dB

DC Current: ≤ 1 A

DC Voltage: ≤ 100 V

RF Power, @10 GHz: ≤ 5 W

Mechanical Characteristics:

Connector: Q (2.4 mm)

Pitch Range: 50 µm to 250 µm

Standard Pitch Step:

(For GSG configuration)

from 50 µm to 450 µm; 25 µm step

Available for 90 µm pitch

Standard Pitch Step:

(For GS/SG configuration)

from 50 µm to 450 µm; 25 µm step

Available for 90/500 µm pitch

Tip Configurations: GSG, GS, SG

Connector Angle:

V-Style: 90-degree

A-Style: 45-degree

T67

(67 GHz Probe)

Typical Electrical Characteristics:

Characteristic Impedance: 50 Ω

Frequency Range: DC to 67 GHz

Insertion Loss (GSG configuration)¹: < 0.8 dB

Return Loss (GSG configuration)¹: > 16 dB

DC Current: ≤ 1 A

DC Voltage: ≤ 100 V

RF Power, @10 GHz: ≤ 5 W

Mechanical Characteristics:

Connector: V (1.85 mm)

Pitch Range: 50 µm to 250 µm

Standard Pitch Step:

(For GSG configuration)

from 50 µm to 400 µm; 25 µm step

Available for 90 µm pitch

Standard Pitch Step:

(For GS/SG configuration)

from 50 µm to 250 µm; 25 µm step

Available for 90/500 µm pitch

Tip Configurations: GSG

Connector Angle:

V-Style: 90-degree

A-Style: 45-degree

T110

(110 GHz Probe)

Typical Electrical Characteristics:

Characteristic Impedance: 50 Ω

Frequency Range: DC to 110 GHz

Insertion Loss (GSG configuration)¹: < 1.2 dB

Return Loss (GSG configuration)¹: > 14 dB

DC Current: ≤ 1 A

DC Voltage: ≤ 100 V

RF Power, @10 GHz: ≤ 5 W

Mechanical Characteristics:

Connector: A (1 mm)

Pitch Range: 50 µm to 250 µm

Standard Pitch Step: 25 µm

Tip Configurations: GSG

Connector Angle: A-Style: 45-degree

T220

(220 GHz Probe)

Typical Electrical Characteristics:

Characteristic Impedance: 50 Ω

Frequency Range: DC to 220 GHz

Insertion Loss (GSG configuration)¹: < 5 dB

Connector End Return Loss (GSG configuration)¹: > 9 dB

Tip End Return Loss (GSG configuration)¹: > 13 dB

DC Current: ≤ 1.5 A

DC Voltage: ≤ 50 V

Mechanical Characteristics:

Connector: Broadband interface)

Pitch Range: 50/75/90/100/125 µm

Temperature Range: -40 ~ 150 ºC

Contact Width: 15 µm

Quadrant Compatible (Allowing Corner Pads): Yes

Recommended Pad Size: 20 µm x 20 µm

Recommended OT (OverTravel): 15 µm

Contact Resistance (on Al at 20 ºC using 15 µm OT): < 45 mΩ

Lifetime Touchdowns (on Al at 20 ºC using 15 µm OT): > 200,000