The Fluke 438-II Power Quality and Motor Analyzer adds key mechanical measurement capabilities for electric motors to the advanced power quality analysis functions of the Fluke 430 Series II Power Quality Analyzers. Quickly and easily measure and analyze key electrical and mechanical performance parameters such as power, harmonics, unbalance, motor speed, torque and mechanical power without the need of mechanical sensors.
The ideal portable motor analysis test tool, the 438-II can help locate, predict, prevent, and troubleshoot power quality problems in three-phase and single-phase power distribution systems, while giving technicians the mechanical and electrical information they need to effectively evaluate motor performance.
Key Features |
Measure key parameters on direct-on-line motors and motors driven by specific variable frequency drive systems including torque, RPM, mechanical power and motor efficiency |
Perform dynamic motor analysis by plotting of motor de-rating factor against load according to NEMA guidelines |
Calculate mechanical power and efficiency without the need of mechanical sensors, just connect to the input conductors and you’re ready to go |
Measure electrical power parameters such as voltage, current, power, apparent power, power factor, harmonic distortion and unbalance to identify characteristics that impact motor efficiency |
Identify power quality issues such as dips, swells, transients, harmonics and unbalance |
PowerWave data technology captures fast RMS data, and shows half-cycle averages and waveforms to characterize electrical system dynamics (generator start-ups, UPS switching etc.) |
Waveform capture function captures 100/120 cycles (50/60 Hz) of each detected event, in all modes, without set-up |
Automatic transient mode captures waveform data at 200 kS/s on all phases simultaneously up to 6 kV |
Specifications |
|
438-II
Power Quality & Motor Analyzer
|
|
Model Overview |
|
Model | 438-II |
Operating Temperature | 0°C ~ +40°C; +40°C ~ +50°C excl. battery |
Storage Temperature | -20°C ~ +60°C |
Humidity | +10°C ~ +30°C: 95% RH non-condensing
+30°C ~ +40°C: 75% RH non-condensing
+40°C ~ +50°C: 45% RH non-condensing |
Maximum Operating Altitude
| Up to 2,000 m (6666 ft) for CAT IV 600 V, CAT III 1000 V
Up to 3,000 m (10,000 ft) for CAT III 600 V, CAT II 1000 V
Maximum storage altitude 12 km (40,000 ft) |
Electro-Magnetic-Compatibility (EMC) | EN 61326 (2005-12) for emission and immunity |
Interfaces | Mini-USB-B, Isolated USB port for PC connectivity SD card slot accessible behind instrument battery |
Warranty | Three years (parts and labor) on main instrument, one year on accessories |
Case
| Design Rugged, shock proof with integrated protective holster Drip and dust proof IP51 according to IEC60529 when used in tilt stand position Shock and vibration Shock 30 g, vibration: 3 g sinusoid, random 0.03 g 2 /Hz according to MIL-PRF-28800F Class 2 |
Display | Brightness: 200 cd/m 2 typ. using power adapter, 90 cd/m 2 typical using battery power Size: 127 x 88 mm (153 mm/6.0 in diagonal) LCD Resolution: 320 x 240 pixels Contrast and brightness: user-adjustable, temperature compensated |
Memory | 8GB SD card (SDHC compliant, FAT32 formatted), up to 32GB optionally. Screen save and multiple data memories for storing data including recordings (dependent on memory size). |
Real-Time Clock | Time and date stamp for Trend mode, Transient display, System Monitor and event capture |