Configured models contain the following attributes:
RF & Microwave Signal GeneratorsVector Signal GeneratorsBenchtopOption | Description |
---|---|
Frequency range: 100kHz to 12.75GHz for RF path A | |
Documentation of calibration values | |
Wideband baseband generator, 500 MHz RF bandwidth, 256 MSaemples, R&S®SMW-B13XT required, retrofittable in Rohde & Schwarz service (hardware option) | |
Baseband generator with realtime coder and ARB (64 MSamples), R&S®SMW-B13/B13T required, retrofittable in Rohde & Schwarz service (hardware option) | |
Signal routing and baseband main module, one I/Q path to RF section, retrofittable in factory only (hardware option) | |
Signal routing and baseband main module, two I/Q paths to RF section, retrofittable in factory only (hardware option) | |
Wideband baseband main module, two I/Q paths to RF section, nur im Werk nachrüstbar retrofittable only in factory (hardware option) | |
Fading simulator, R&S®SMW-B13/B13T and R&S®SMW-B10 required, retrofittable in Rohde & Schwarz service (hardware option) | |
Fading Simulator and signal processor, R&S®SMW-B13XT and R&S®SMW-B9 required, retrofittable in Rohde & Schwarz Service (hardware option) | |
FM/Phim modulator, frequency option (R&S SMW-B1xx/B2xx) and R&S SMW-B13T/B13XT required, retrofittable in factory only (hardware option) | |
Enhanced phase noise performance and FM/Phim modulator, frequency option (R&S SMW-B1xx/B2xx) and R&S SMW-B13T/B13XT required, retrofittable in factory only (hardware option) | |
Rear panel connectors for RF path A (3/6 GHz) and I/Q, R&S®SMW-B1003/B1006 required, retrofit only in Rohde & Schwarz service center with UCS (hardware option) | |
Phase coherence, retrofit in factory only (hardware option) | |
Solid state drive (hardware option) | |
Deeper chassis, prerequisite for R&S SMW-B2012, R&S SMW-B2031, R&S SMW-B2044, R&S SMW-B2044N, not installable post factory (hardware option) | |
Frequency range : 100kHz to 3GHz for RF path A, | |
Frequency range : 100kHz to 6GHz for RF path A, not installable post factory (hardware option) | |
Frequency range: 100 kHz to 7.5 GHz for RF path A, not installable post factory (hardware option) | |
Frequency range : 100kHz to 12.75GHz for RF path A, not installable post factory (hardware option) | |
Frequency range : 100kHz to 20GHz for RF path A, not installable post factory (hardware option) | |
Frequency range : 100 kHz to 31.8 GHz for RF path A, not installable post factory (hardware option) | |
Frequency range: 100 kHz to 40 GHz for RF path A, not installable post factory (hardware option) | |
100kHz to 44GHz Vector Signal Generator | |
Frequency range : 100kHz to 3GHz for RF path B, R&S SMW-B13T/B13XT required, retrofittable in factory only (hardware option) | |
Frequency range : 100kHz to 6GHz for RF path B, R&S SMW-B13T/B13XT required, retrofittable in factory only (hardware option) | |
Frequency range : 100kHz to 20GHz for RF path B, R&S SMW-B13T/B13XT required, retrofittable in factory only (hardware option) | |
Low phase noise for RF path A frequency option R&S®SMW-B10xx required, not installable post factory (hardware option) | |
Improved close in phase noise for RF path A, frequency option R&S®SMW-B10xx required, not installable post factory (hardware option) | |
Ultra low phase noise for RF path A, frequency option R&S®SMW-B10xx required | |
Improved close in phase noise for RF path B, R&S SMW-B710 in path A required, only installable together with frequency option R&S SMW-B20xx (hardware option) | |
Ultra low phase noise for RF path B, R&S SMW-B711 in path A required, only installable together with frequency option R&S SMW-B20xx (hardware option) | |
Frequency range: 100 kHz to 6 GHz for RF path A, not installable post factory (hardware option) | |
Frequency range: 100 kHz to 7.5 GHz for RF path A, not installable post factory (hardware option) | |
Frequency range: 100 kHz to 12.75 GHz for RF path A, not installable post factory (hardware option) | |
Frequency range: 100 kHz to 20 GHz for RF path A, not installable post factory (hardware option) | |
Frequency range: 100 kHz to 31.8 GHz for RF path A, not installable post factory (hardware option) | |
Frequency range: 100 kHz to 40 GHz for RF path A, not installable post factory (hardware option) | |
Frequency range: 100 kHz to 44 GHz for RF path A, not installable post factory (hardware option) | |
Frequency range: 100 kHz to 44 GHz for RF path A,I/Q modulation bandwidth max. 550 MHz (in RF), min. pulse width limited, | |
Frequency range: 100 kHz to 56 GHz for RF path A, not installable post factory (hardware option) | |
Frequency range: 100 kHz to 67 GHz for RF path A, not installable post factory (hardware option). | |
Frequency range: 100 kHz to 67 GHz for RF path A,I/Q modulation bandwidth max. 550 MHz (in RF), min. pulse width limited, not installable post factory (hardware option). | |
Frequency range: 100kHz to 6GHz for RF path B | |
Frequency range: 100 kHz to 7.5 GHz for RF path B, frequency option R&S SMW-B1007 and R&S SMW-B13T/B13XT required, not installable post factory (hardware option) | |
Frequency range: 100 kHz to 20 GHz for RF path B, frequency option R&S SMW-B10xx and R&S SMW-B13T/B13XT required, not installable post factory (hardware option) | |
Frequency range: 100 kHz to 44 GHz for RF path B, R&S SMW-B94L and R&S SMW-B13T/-B13XT required, not installable post factory (hardware option) | |
Differential analog I/Q outputs, R&S®SMW-B13/B13T required (software license) | |
Wideband differential analog I/Q outputs (R&S®SMW-B13XT required) (software license) | |
Digital baseband output, R&S®SMW-B13/B13T required (software license) | |
Digital baseband output for R&S®SMW wideband baseband R&S®SMW-B13XT required (software license) | |
Pulse modulator, frequency option R&S®SMW-B10xx/-B20xx required (software license) | |
High performance pulse generator, R&S®SMW-B13/B13T/B13XT required (software license) | |
Multi function generator, R&S®SMW-B13/B13T/B13XT required (software license) | |
GSM/EDGE, R&S®SMW-B9/B10 required (software license) | |
EDGE Evolution, R&S®SMW-K40 required (software license) | |
3GPP FDD, R&S®SMW-B9/B10 required (software license) | |
IEEE 802.16, R&S®SMW-B10 required (software license) | |
TD-SCDMA, R&S®SMW-B9/B10 required (software license) | |
TD-SCDMA enhanced BS/MS tests R&S®SMW-K50 required (software license) | |
IEEE 802.11a/b/g/n/j/p, R&S®SMW-B9/B10 required (software license) | |
EUTRA/LTE Release 8, R&S®SMW-B9/B10 required (software license) | |
Bluetooth® including Enhanced Data Rate, R&S®SMW-B9/B10 required (software license) | |
Multi carrier CW signal generation, R&S®SMW-B9/B10 required (software license) | |
Additional white Gaussian noise, R&S®SMW-B13/B13T/B13XT required (software license) | |
EUTRA/LTE closed-loop BS test, HARQ feedback, timing adjustment R&S®SMW-K55 required (software license) | |
Dynamic fading, R&S®SMW-B14 required (software license) | |
Enhanced fading models including Gauss- and Watterson-fading, R&S®SMW-B14 required (software license) | |
MIMO fading and routing, R&S®SMW-B13T, 2x R&S®SMW-B10 and 2x R&S®SMW-B14 or R&S®SMW-B13XT, 2x R&S®SMW-B9 and 2x R&S®SMW-B15 required (software license) | |
Multiple Entities, enables >2 baseband entities, 2x R&S®SMW-B10 and R&S®SMW-B13T or 2x R&S®SMW-B9 and R&S®SMW-B13XT required (software license) | |
Logfile generation; intermediate results and logfiles of the signal generation process, R&S SMW-K55 or R&S SMW-K115 or R&S SMW-K144required (software license) | |
EUTRA/LTE Release 9 and enhanced features, R&S®SMW-K55 required (software license) | |
EUTRA/LTE Release 10 (LTE Advanced), R&S®SMW-K55 required (software license) | |
IEEE 802.11ac R&S®SMW-K54 required (software license) | |
LTE Release 11 + enhanced features, R&S®SMW-K55 required (software license) | |
EUTRA/LTE Release 12 | |
5G Air interface candidate | |
DVB-S2/DVB-S2X R&S®SMW-B9/B10 required (software license) | |
Verizon 5GTF Signals R&S SMW-B9/B10 required (software license) | |
IEEE 802.11ad R&S®SMW-B9 and R&S®SMW-K527 required (software license) | |
Digital Standard IEEE 802.11ax R&S®SMW-K54 required (software license) | |
5G New radio | |
5G NR Closed-Loop BS Test R&S®SMW-K144 required (software license) | |
IEEE 802.11be (SL) for SMW200A, SMW-K54 required | |
5G New Radio Release 16 for R&S®SMW200A R&S®SMW-K144 required (software license) | |
HRP UWB for SMW200A; SMW-B9 required (Software License) | |
Pulse sequencing external PC software required R&S®SMW-B9/B10 required (software license) | |
Enhanced pulse sequencing external PC software required (R&S®SMW-K300 required) (software license) | |
Digital Standard IEEE 802.11ax R&S®SMW-K254 and R&S®WinIQSIM2 required (software license) | |
Wideband Extended Sequencing for R&S®SMW-B9 (R&S®SMW-B9 erforderlich) (Software-Lizenz) | |
Realtime Control Interface (R&S SMW-K502 required) (software license) | |
HS upgrade PDW streaming | |
ARB memory extension to 512 MSamples, R&S®SMW-B10 required (software license) | |
ARB memory extension to 1 GSamples, R&S®SMW-B10 and R&S®SMW-K511 required (software license) | |
ARB memory extension to 2 Gsamples, R&S®-SMW-B9 required (software license) | |
Baseband extension to 160MHz RF bandwidth, R&S®SMW-B10 required (software license) | |
Baseband extension to 1 GHz RF bandwidth, R&S®SMW-B9 required (software license) | |
Baseband extension to 2 GHz RF bandwidth, R&S®SMW-B9 required (software license) | |
Baseband extension from 1 GHz to 2 GHz RF bandwidth, R&S®SMW-B9 and R&S®SMW-K525 required (software license) | |
Envelope tracking, R&S®SMW-B9/B10 and R&S®SMW-K17/K16 required (software license) | |
AM/AM, AM/PM Predistortion, R&S®SMW-B9/B10 and correspondent RF path required (software license) | |
User defined frequency response correction | |
Automated RF Port alignmt | |
Digital Doherty for Doherty Amplifier Development | |
External frontend control | |
100 MHz, 1 GHz ultra low noise reference input/output, frequency option R&S®SMW-B10xx required. | |
Flexible reference input (1 MHz to 100 MHz), frequency option R&S®SMW-B10xx required. | |
AM / FM / PhiM, frequency option R&S®SMW-B10xx/-B20xx and R&S®SMW-B13T/-B13XT required (software license) | |
Differential analog I/Q inputs for RF path A, frequency option R&S®SMW-B10xx required. | |
customized Dynamic Fading (requires K71) | |
19" adapter BW2010, cabinet 4HU 1/1 |
Showing 1 - 6 of 123 results
Product ID: P-181179
Availability confirmed on quote
Quote
Product available under Certified Pre-Owned Program.
Find out moreAvailability confirmed on quote1
₹1,03,78,268.00*₹1,57,58,379.00
This product may be available by an alternative finance solution.
Product ID: P-181181
Availability confirmed on quote
Quote
Product available under Certified Pre-Owned Program.
Find out moreAvailability confirmed on quote1
₹83,36,641.00*₹1,51,15,267.00
This product may be available by an alternative finance solution.
Product ID: P-229528
Availability confirmed on quote
Quote
Product available under Certified Pre-Owned Program.
Find out moreAvailability confirmed on quote1
₹1,66,34,577.00*₹2,23,29,439.00
This product may be available by an alternative finance solution.
Product ID: P-536571
Availability confirmed on quote
Quote
This product may be available by an alternative finance solution.
Product ID: P-643741
Availability confirmed on quote
Quote
This product may be available by an alternative finance solution.
Product ID: P-431462
Availability confirmed on quote
Quote
This product may be available by an alternative finance solution.
Showing 1 - 6 of 123 results
How do I select a configuration?
You can scroll through configurations, search for options (separated by ;) above, and filter by Rental, New & Used. Or, let our experts guide you to the right solution by simply using ‘Quick Quote’ at the top of the page.
What’s the difference between Quote and Buy?
You can request a Quote for any item. Many New and Used items are also available to Buy online! You can mix your cart with items to Quote and items to Buy online. You’ll be able to complete the Quote and Buy checkout process at the same time. To check details, simply use ‘Quote’ and we’ll confirm everything. You can now buy either by card or by supplying a Purchase Order (P.O.). Note that P.O's will require verification and account set-up if you do not have an account.
Can I add extra items or make special requests?
Look out for the ‘Additional Information’ field when submitting your details. Use this for extra accessory or special calibration requests or for special delivery instructions. We’ll contact you when we receive your Order or Quote to fulfil.