Rohde & Schwarz NRV-Z53 (858.0500.02)

These sensors measure the true RMS power from about 100 pW to 10 mW and can be used in this level range for signals with harmonic contents, noisy or modulated signals.

For sinewave signals, the measurement range extends to 20 mW (13 mW into 75 W).

Based on diode detectors with 20 dB attenuator, these sensors provide true RMS power measurement in the range from 10 nW to1 mW and up to 500 mW for sinewave signals.

Compared to thermocouple sensors, shorter measurement times can be attained with these sensors.

These sensors measure the peak envelope power (PEP) of modulated or pulsed signals. Model 02 with a minimum pulse repetition frequency of 10 Hz is designed for general applications.

Model 05 of NRV-Z32 enables measurement of the power peak value of mobile stations to NADC and PDC standard.

Diode Power Sensor 50 W

10 MHz to 18 GHz, 200 pW to 20 mW

Diode Power Sensor 50 W

10 MHz to 18 GHz, 20 nW to 500 mW

Diode Power Sensor 75 W

1 MHz to 2.5 GHz, 100 pW to 13 mW

Diode Power Sensor 50 W

100 kHz to 6 GHz, 100 pW to 20 mW

Diode Power Sensor 50 W

100 kHz to 6 GHz, 10 nW to 500 mW

Diode Power Sensor 50 W

50 MHz to 26.5 GHz, 400 pW to 20 mW

Diode Power Sensor 50 W

50 MHz to 40 GHz, 400 pW to 20 mW

Peak Power Sensor 50 W

30 MHz to 6 GHz, 1 µW to 20 mW

Peak power measurements, pulse width ≥2 (200) µs,

Pulse repetition rate ≥10 (100) Hz, 3 models

Peak Power Sensor 50 W

30 MHz to 6 GHz, 100 µW to 2(4) W

Peak power measurements

Pulse width ≥2 (200) µs, pulse repetition rate ≥25 (100) Hz, 2 models

Peak Power Sensor 50 W

30 MHz to 6 GHz, 1 mW to 20 W

Peak power measurements up to 20 W, pulse width ≥2 (200) µs

Pulse repetition rate ≥100 Hz, 2 models

Thermal Power Sensor 50 W

DC to 18 GHz, 1 µW to 100 mW

Thermal Power Sensor 50 W

DC to 26.5 GHz, 1 µW to 100 mW

Thermal Power Sensor 50 W

DC to 18 GHz, 100 µW to 10 W

Thermal Power Sensor 50 W

DC to 18 GHz, 300 µW to 30 W

Thermal Power Sensor 50 W

DC to 40 GHz, 1 µW to 100 mW

10 V Insertion Unit 50 W

200 µV to 10 V, 9 kHz to 3 GHz

100 V Insertion Unit 50 W

2 mV to 100 V, 100 kHz to 3 GHz

Virtually no-load RF voltage measurements in coaxial 50 W systems even at higher voltages;

Due to minimum insertion loss and reflection coefficient, this unit leaves a 50 W line practically unaffected

RF Probe

200 µV to 10 V, 20 kHz to 1 GHz

URV5-Z7

With 20 dB plug-on divider*

URV5-Z7

With 40 dB plug-on divider*

URV5-Z7

With 50 W adapter URV-Z50

URV5-Z7

With 75 W adapter URV-Z3

DC Probes

1 mV to 400 V, 9 MW ll 3 pF