Produits Fabricants Services Solutions Resources Promotions About us

Devis Rapide: Keysight Technologies U2022XA

+33 (0) 1 45 12 65 65Besoin d'aide ? Demander l'aide d'un expert.

Keysight Technologies U2022XA

Configuration

USB Peak and Average Power Sensor; 50 MHz to 40 GHz

Modèle

U2022XA

Gamme de produits

RF & Microwave

Fabricant

Keysight Technologies

Cette configuration a les caractéristiques suivantes:

RF & MicrowaveRF Power Sensors20GHz <= 50GHz

Configurations

Caractéristiques principales

Description produit

Ressources

Laissez-nous vous conseiller sur la configuration exacte

Cliquez sur 'Obtenez un devis rapidement' ou 'Configurez votre produit' et nous vous contacterons pour vous adresser un devis conforme à votre besoin.

Configuration

Vous pouvez cliquer sur Contactez-moi, si vous préférez, et nos experts vous guideront vers la bonne solution technique et financière.

Attribut	Valeur
High Frequency (range)	20GHz <= 50GHz

Description produit

Keysight U2020 X-series USB power sensors provides the peak and average power measurement capability of a power meter in a compact and portable form factor.

The Keysight U2020 X-series USB peak and average power sensors come bundled with the N1918A Power Analysis Manager software at no additional cost. Simply connect the sensor to your PC to perform complex pulse analysis and standard average power measurement.

The U2020 X-Series is also supported by the Keysight BenchVue software. BenchVue makes it easy to control your power meter to log data and visualize measurements in a wide array of display options without any programming.

Key Features

Frequency range of 50 MHz to 40 GHz

Wide dynamic range of -30 to +20 dBm (peak/gated), -45 dBm to 20 dBm (average only mode)

30 MHz video bandwidth and single shot real-time capture at 80 Msample/sec per second

Internal zeroing & calibration

High measurement speed of up to 25,000 readings/second (free run/fast buffer mode)

A BenchVue software license (BV0007B) is now included with your instrument.

BenchVue makes it simple to connect, control instruments, and automate test sequences.

Benefits

Perform measurements direct from your PC

The U2020 X-Series is supported by the Keysight BenchVue software.

BenchVue makes it easy to control your power meter to log data and visualize measurements in a wide array of display options without any programming.

Simply connect the sensor to your PC installed BenchVue BV0007B Power Meter/Sensor Control and Analysis app to perform complex pulse analysis and standard average power measurement.

Built in external trigger in and out

External trigger will enable accurate trigger of small signals close to the signal noise floor.

With the built-in trigger in/out connection on the Keysight U2020 X-series USB power sensors; you can connect an external trigger signal from a signal source or the device under test directly to the USB sensor through a standard BNC to SMB cable.

Specifications
U2020 X-Series
Model Overview
Model	U2021XA	U2022XA
Frequency Range	50 MHz to 18 GHz	50 MHz to 40 GHz 50 MHz to 50 GHz (with Option H50)
Power Range (Normal Mode)	–30 dBm to 20 dBm (50 MHz to <500 MHz) –35 dBm to 20 dBm (500 MHz to 40 GHz) –35 dBm to 8 dBm (> 40 GHz to 50 GHz)	–30 dBm to 20 dBm (50 MHz to <500 MHz) –35 dBm to 20 dBm (500 MHz to 40 GHz) –35 dBm to 8 dBm (> 40 GHz to 50 GHz)
Power Range (Average Only Mode (1)(2))	–45 dBm to 20 dBm (50 MHz to 40 GHz) –45 dBm to 8 dBm (> 40 GHz to 50 GHz)	–45 dBm to 20 dBm (50 MHz to 40 GHz) –45 dBm to 8 dBm (> 40 GHz to 50 GHz)
Damage Level	23 dBm (average power) 30 dBm (< 1 μs duration) (peak power)	23 dBm (average power) 30 dBm (< 1 μs duration) (peak power)
Rise/Fall Time	≤ 13 ns (3)	≤ 13 ns (3)
Maximum Sampling Rate	80 Msamples/sec, continuous sampling	80 Msamples/sec, continuous sampling
Video Bandwidth	≥ 30 MHz	≥ 30 MHz
Single-Shot Bandwidth	≥ 30 MHz	≥ 30 MHz
Minimum Pulse Width	50 ns (4)	50 ns (4)
Basic Accuracy of Average Power Measurement (5)	≤ ± 0.2 dB or ± 4.5%	≤ ± 0.3 dB or ± 6.7%
Maximum Capture Length	1 s (decimated) 1.2 ms (at full sampling rate)	1 s (decimated) 1.2 ms (at full sampling rate)
Maximum Pulse Repetition Rate	10 MHz (based on 8 samples/period)	10 MHz (based on 8 samples/period)
Connector Type	N-type (m)	2.4 mm (m)

Specifications
U2020 X-Series USB Peak and Average Power Sensors
Model Overview
Model	Description
U2021XA	X-Series USB peak and average power sensor, 50 MHz to 18 GHz Included Accessories: Power sensor cable 5 ft (1.5 m), default cable length BNC male to SMB female trigger cable, 50 Ω, 1.5 m (Quantity: 2) Certificate of calibration
U2022XA	X-Series USB peak and average power sensor, 50 MHz to 40 GHz Included Accessories: Power sensor cable 5 ft (1.5 m), default cable length BNC male to SMB female trigger cable, 50 Ω, 1.5 m (Quantity: 2) Certificate of calibration
U2022XA-H50	X-Series USB peak and average power sensor, 50 MHz to 50 GHz Included Accessories: Power sensor cable 5 ft (1.5 m), default cable length BNC male to SMB female trigger cable, 50 Ω, 1.5 m (Quantity: 2) Certificate of calibration

Aucun résultat ne correspond à votre recherche ?

Nous contacter