FieldFox is equipped to handle routine maintenance, in-depth troubleshooting and anything in between. FieldFox delivers Agilent-quality measurements – wherever you need to go. Add FieldFox to your kit, and carry precision with you.
The microwave combination analyzer's base function is a cable and antenna analyzer and it can be configured to include a spectrum and network analyzer. FieldFox can be ordered with additional capabilities: power meter, independent signal generator, vector voltmeter, interference analyzer, variable DC source, built-in GPS receiver, and remote control using an iPad or iPhone.
Key Features |
100 kHz to 14 GHz frequency range |
Expand capabilities with optional tracking generator, interference analyzer, built-in power meter, and more |
Make accurate spectrum analyzer measurements (± 0.5 dB) without needing warm-up |
Locate interfering signals using the intuitive spectrogram display and recording capability |
Easily measure average and pulse power with a USB power sensor, pulse measurements with time gating |
Lightest microwave handheld spectrum analyzer at only 6.6 lb. (3.0 kg) |
Specifications |
|
FieldFox Handheld Microwave Spectrum Analyzer |
|
Features | Parameters |
Maximum Frequency | 26.5 GHz |
SA Start Frequency | 5 kHz |
Number of Built-In Ports | 2 ports |
Instrument Type | Spectrum Analyzer |
Cable and Antenna Analyzer | No |
Spectrum Analyzer | Yes - Standard |
Vector Network Analyzer | No |
Additional SA Based Features | Built-In Power Meter
Extended Range Transmission Analysis (ERTA)
Real-Time Spectrum Analysis
Noise Figure Measurements
Over-The-Air Measurements
|
System Features | Built-In DC Source
GPS Receiver - Internal Only
Remote Control Capability
|
Power Measurement Using USB Sensor | CW or Swept-Frequency
Frequency-Offset
RF Pulse Test with Peak Sensor
|
Standard Attenuator Range | 30 dB |
Standard Attenuator Step | 5 dB |
DANL @1 GHz | -155 dBm |
Maximum Analysis Bandwidth | 10 MHz |
Phase Noise @1 GHz (1 MHz offset) | -113 dBc/Hz |
Phase Noise @1 GHz (10 kHz offset) | -111 dBc/Hz |
Phase Noise @1 GHz (30 kHz offset) | -110 dBc/Hz |
Spur Free Dynamic Range | > 105 dB |
TOI @1 GHz (3rd Order Intercept) | +15 dBm |
Applications Available | Yes |
Maximum Real-Time Bandwidth | 10 MHz |
Bandwidth Options | 10 MHz (standard) |
Performance Level | ◆◆◆◇◇◇ |
Applications-Cellular | 89600 VSA Software
Over-The-Air LTE FDD and 5GTF
|
Applications-Digital Video | 89600 VSA Software |
Applications-General Purpose | AM/FM Tune and Listen
Field Strength Measurement
SCPI Code Compatibility
Spectrogram
Stimulus Response
|
Applications-Wireless Connectivity | 89600 VSA Software |
Specifications |
|
|
|
|
|
FieldFox Handheld Analyzers Selection Guide |
|
|
|
|
|
Maximum Frequency | Combination Models (CAT + VNA + SA) | Combination Models (CAT + VNA + SA) | VNA Models | VNA Models | SA Models |
4 GHz | N9912A-104 | N9913A | N9923A-104 |
|
|
6/6.5 GHz | N9912A-106 (2) | N9914A (3) | N9923A-106 (2) |
|
|
9 GHz |
| N9915A |
| N9925A | N9935A |
14 GHz |
| N9916A |
| N9926A | N9936A |
18 GHz |
| N9917A |
| N9927A | N9937A |
26.5 GHz |
| N9918A |
| N9928A | N9938A |
32 GHz |
| N9950A |
|
| N9960A |
44 GHz |
| N9951A |
|
| N9961A |
50 GHz |
| N9952A |
|
| N9962A |
Notes:
(1). Also referred to as cable and antenna analyzer
(2). Maximum frequency is 6 GHz.
(3). Maximum frequency is 6.5 GHz
Specifications |
|
FieldFox Handheld Microwave Spectrum Analyzer |
|
Options |
|
Model Number | Description |
N9938A-030 | Remote Control Capability |
N9938A-208 | USB Power Sensor Measurements Versus Frequency |
N9938A-209 | Extended Range Transmission Analysis (ERTA) |
N9938A-220 | Full-band Tracking Generator |
N9938A-235 | Preamplifier, 26.5 GHz |
N9938A-236 | Interference Analyzer and Spectrogram |
N9938A-238 | Spectrum Analyzer Time Gating |
N9938A-302 | External USB Power Sensor Support |
N9938A-307 | GPS Receiver |
N9938A-309 | DC Bias Variable Voltage Source |
N9938A-310 | Built-in Power Meter |
N9938A-312 | Channel Scanner |
N9938A-320 | Reflection Measurements (Return Loss, VSWR and Scalar Measurements) |
N9938A-330 | Pulse Measurements |
N9938A-350 | Real-time Spectrum Analyzer (RTSA) |
N9938A-351 | I/Q Analyzer (IQA) |
N9938A-355 | Analog Demodulation |
N9938A-356 | Noise Figure (NF) |
N9938A-370 | Over-the-Air (OTA) LTE FDD |
N9938A-377 | Over-the-Air (OTA) 5GTF |
N9938A-358 | EMF Measurements |
N9938A-352 | Indoor and Outdoor Mapping |
Specifications |
|
FieldFox Handheld Microwave Spectrum Analyzer |
|
Connector Type |
|
N9938A-100 | 3.5mm APC connectors |