California Inst CSW5550-400

The CSW Series is DSP controlled and can be operated from an easy to use front panel keypad.

Functions are grouped logically and are directly accessible from the keypad.

This eliminates the need to search through various levels of menus and/or soft keys.

A large analog control knob can be used to quickly slew output parameters.

This knob is controlled by a dynamic rate change algorithm that combines the benefits of precise control over small parameter changes with quick sweeps through the entire range.

A direct coupled, transformerless design allows AC and DC on separate phases or on the same phase.

The CSW can be used as a true DC power supply. High DC content waveforms (up to 312 volts) can be created with no derating of output power, even with 100% reactive loads, eliminating the need for a separate DC supply.

Waveform programming is easily accomplished using the Graphical Users Interface software.

Waveforms can be uploaded and modified from a digital scope.

The waveforms can then be downloaded to the CSW and output to precisely simulate real-world conditions.

The CSW Series is DSP controlled and can be operated from an easy to use front panel keypad.

Functions are grouped logically and are directly accessible from the keypad.

This eliminates the need to search through various levels of menus and/or soft keys.

A large analog control knob can be used to quickly slew output parameters.

This knob is controlled by a dynamic rate change algorithm that combines the benefits of precise control over small parameter changes with quick sweeps through the entire range.

The CSW is designed for testing today's complex electronics, including avionics, telecommunications and commercial electronics requiring low profile, light weight power supplies.

Other applications include:

▪ Testing for real world power conditions using different waveforms on all 3 phases (including DC)

▪ Load susceptibility testing with sequence or event programming and multiple voltage harmonics

▪ Power line disturbance simulation testing

▪ MIL-STD-704, DO-160, B747 and ABD100 avionics testing

▪ Power supply testing for AC-DC, DC-DC converters and UPS's

▪ Transients on 12 & 24 VDC for automotive applications

The CSW Series is based on a 5,550VA power source.

The CSW features selectable Single or Three Phase output via front panel menu selection or via remote control interface.

Utilizing Master / Auxilary arrangement the CSW offers the flexibility to paralled up to power levels of 33,300VA

With a crest factor of up to 3.25:1; the CSW Series AC source can drive difficult nonlinear loads with ease.

Since many modern products use switching power supplies, they have a tendency to pull high repetitive peak currents.

The CSW5550 can deliver up to 38.5 Amps of repetitive peak current

Using the latest DSP technology, the CSW Series programmable controller is capable of generating harmonic waveforms to test for harmonics susceptibility.

The Windows Graphical User Interface program can be used to define harmonic waveforms by specifying amplitude and phase for up to 50 harmonics.

The waveform data points are generated and downloaded by the GUI to the AC source through the remote interface.

Up to 200 waveforms can be stored in nonvolatile memory and given a user defined name for easy recall.

Airbus Directive 0100.1.8 tests.

[AC only.]

RTCA/DO-160D, Change 2, EuroCAE-14D and Airbus test firmware [Section 16, AC only.

Refer to -160 option data sheet for detaiIs]

LXI Ethernet LAN Interface

(Rj45 Connector)

Multi-Box.

Adds controller to auxiliary chassis of multi-chassis systems

SCPI Command Firmware (Simulates the Elgar SW Series)

Not all commands are supported. Please contact factory for details.