Produits Fabricants Services Solutions Resources Promotions About us

Devis Rapide: Keysight Technologies N2800A

+33 (0) 1 45 12 65 65Besoin d'aide ? Demander l'aide d'un expert.

Keysight Technologies N2800A

InfiniiMax III Series Probe Amplifier; 16 GHz

Modèle

N2800A

Fabricant

Keysight Technologies

Cette configuration a les caractéristiques suivantes:

Oscilloscope Probes10GHz <= 20GHz

Configurations

Caractéristiques principales

Description produit

Ressources

Laissez-nous vous conseiller sur la configuration exacte

Cliquez sur 'Configurez votre produit' et nous vous contacterons pour vous adresser un devis conforme à votre besoin.

Vous pouvez cliquer sur Contactez-moi, si vous préférez, et nos experts vous guideront vers la bonne solution technique et financière.

Attribut	Valeur
High Frequency (range)	10GHz <= 20GHz

Description produit

The InfiniiMax III probing system provides the highest bandwidth and incredibly low loading to allow for a completely new level of signal fidelity and accuracy. Four different InfiniiMax III probe amplifiers ranging from 16 GHz to 30 GHz are available for matching your probing solution to your performance and budget requirements. A proprietary 200 GHz fT InP (indium phosphide) IC process with backside ground vias and novel thick film technology is utilized for the InfiniiMax III probe system to accommodate your highest performance needs and is unmatched by any product in the market.

Key Features

Full 16 GHz to the probe tip

Industry’s lowest probe and scope system noise

Industry’s highest fidelity and accuracy due to bandwidth and extremely low loading

Probe amplifiers loaded with measured s-parameters for more accurate response correction

Probe bandwidth upgradable

Variety of probe heads for different use models with maximum usability

Specifications
N2800A InfiniiMax III Series Probe Amplifier
Feature	Parameter
Bandwidth	16 GHz Tr = 27.1 psec
Range	DC attenuation ratio : 6:1 (3:1 with 200 Ω ZIF tip) Input voltage range : 1.6 Vpp (0.8 Vpp with 200 Ω ZIF tip) Input common mode range : ±12 V at DC to 250 Hz, ±2.5 V at >250 Hz (±6 V at DC to 250 Hz, ±1.25 V at >250 Hz with 200 Ω ZIF tip) Offset range : ±16 V when probing a single-ended signal
Input Impedance	DC input resistance : R diff = 100 kΩ ±2%, R se = 50 kΩ ±2% Input resistance @ >10 kHz : R diff = 1 kΩ, R se = 500 Ω Input capacitance : C diff = 32 fF, C se = 48 fF (with ZIF probe head)
Connectivity	N5445A InfiniiMax III browser N5439A InfiniiMax III ZIF probe head N5444A InfiniiMax III 2.92 mm/3.5 mm/SMA probe head N5441A InfiniiMax III solder-in probe head

Specifications
InfiniiMax III Series Probe Amplifier
Model Overview
Model	Description	Recommended Oscilloscope
N2800A	16 GHz InfiniiMax III probe amplifier	Infiniium 90000X Series 16 GHz models
N2801A	20 GHz InfiniiMax III probe amplifier	Infiniium 90000X/Q Series 20 GHz models
N2802A	25 GHz InfiniiMax III probe amplifier	Infiniium 90000X/Q Series 25 GHz models
N2803A	30 GHz InfiniiMax III probe amplifier	Infiniium 90000X/Q Series 28 GHz - 63 GHz models

Aucun résultat ne correspond à votre recherche ?

Nous contacter