You are browsing the FR site. Would you like to be redirected to another country or region to see content and products specific to your location?
US
Devis Rapide: Fujikura 90S+ (S017521)
Fujikura 90S+ (S017521)
En stock
Affichez les configurations
Core Alignment Fusion Splicer
Modèle
90S+ (S017521)Gamme de produits
Network & Fiber InstallationsFabricant
FujikuraCette configuration a les caractéristiques suivantes:
Network & Fiber InstallationsFusion SplicersConfigurations
Caractéristiques principales
Description produit
Ressources
Laissez-nous vous conseiller sur la configuration exacte
Cliquez sur 'Configurez votre produit' et nous vous contacterons pour vous adresser un devis conforme à votre besoin.
Vous pouvez cliquer sur Contactez-moi, si vous préférez, et nos experts vous guideront vers la bonne solution technique et financière.
Caractéristiques principales
Désolé, nous n'avons actuellement aucune information concernant les caractéristiques principales de ce produit.
Si vous désirez en savoir plus, merci prendre contact avec notre équipe et l'un de nos experts se fera un plaisir de vous renseigner.
Description produit
The Fujikura 90S+ core alignment fusion splicer solves common problems seen in the field—from splicing poor quality legacy fiber to automated equipment maintenance and upkeep. The Fujikura 90S+ can be use in multiple field splicing applications including bend-insensitive fibers in drop cables, long-haul terrestrial and submarine LEAF® fibers, loose buffer fiber, splice-on connectors, and the list goes on. The speed and accuracy of the 90S+ make it suitable for certain production and specialty environments where high output, tight packaging, and low loss requirements are required.
| Key Features | |
| Automatic Open-Close Wind Protectors | The faster automated features of the 90S+ fusion splicer reduce installation times. With this splicer, an operator can complete the entire splice process from splicing to heating without touching the 90S+ and only moving the fiber. |
| Operation Time Reduction | The shape of the sheath clamp is optimized for 60mm length protection sleeves. The length from splice point to the edge of the sheath clamp is 30mm. Therefore, it is easy to center the protection sleeve over the splice by using your fingers to reference the splice point. |
| Fiber Retention Clamp | The fiber retention clamps support the automated operations. When the sheath clamps open automatically after splicing, the fiber retention clamps gently hold the spliced fiber to keep it from flying out. The retention clamps release when the fiber is lifted by the operator. |
| Operation Time Reduction | These functions enable the 90S+ fusion splicer to reduce operation time by 50% over the previous model. |
| Carrying Case | There are multiple ways to utilize the 90S+ fusion splicer carrying case. The 90S+ fusion splicer is ready to use just by opening the case, but it is also possible to use the 90S+ fusion splicer on top of the carrying case or only with the work tray depending on the work environment. |
| Work Tray | The work tray has many functions. There are two drawers for storage, and the drawers are large enough to store tools or battery packs. Also, the work tray can be divided in two, so it is configurable to fit your work space. |
| Loose Tube Compatibility | The sheath clamp of the 90S+ fusion splicer is compatible with loose tube fiber. The Protrusion part on of the sheath clamp for loose tube fiber engages or retracts by simply changing the switch position with your finger. |
| Tool-Less Electrodes and Illumination | The 90S+ fusion splicer electrodes come as an “assy” including the fixing screw. You can rotate the screw by hand without tools, enabling easy electrode replacement. The transparent electrode covers support wider illumination of the v-groove. As the sheath clamp opens on the opposite side of the illumination lamp, the sheath clamp area is illuminated without shadow. |
| Active Fusion Control Technology | |
| Active Fusion Control by Cleave Condition | One of main causes of high splice loss is bad cleave end face. The 90S+ fusion splicer analyzes the condition of both L and R cleave end faces and performs optimal fusion control. This new technology improves splice loss significantly and reduces the risk of re-installation. |
| Active Fusion Control by Fiber Brightness | Fusion is easily affected by changes in the environment. The 90S+ fusion splicer uses real-time fusion parameter control by analyzing the fiber’s brightness intensity during fusion. It contributes to stable, reduced splice loss. |
| Active Fusion Control by Fiber Discrimination | Adequate splice parameters may differ depending on fiber type. The 90S+ fusion splicer automatically applies the optimum splice parameters depending on the fiber type. |
| Active Blade Management Technology | |
| Active Blade Rotation by Motor | The 90S+ fusion splicer and CT50 fiber cleaver are enabled with wireless data connectivity. This capability allows automatic cleaver blade rotation when the 90S+ fusion splicer judges the blade is worn. The 90S+ fusion splicer can connect to two CT50s simultaneously. |
| Active Blade Life Management | The 90S+ fusion splicer displays the remaining blade life and informs the user when a blade height change, position change, or new blade is required. |
| Specifications | |
| Core Alignment Fusion splicer 90S+ | |
| Features | Parameters |
| Fiber Alignment Method | Active core alignment |
| Fiber Count can be Spliced | Single fiber |
Applicable Fiber Fiber Type | Single mode optical fiber Multi mode optical fiber |
Applicable fiber Cladding Dia. | 80 to 150μm |
Applicable coating Sheath Clamp | Coating dia. : Max. 3000μm Cleave length : 5 to 16mm *1 |
Fiber splice performance Splice Loss *2 | ITU-T G.652 : Avg. 0.02dB ITU-T G.651 : Avg. 0.01dB ITU-T G.653 : Avg. 0.04dB ITU-T G.654 : Avg. 0.04dB ITU-T G.655 : Avg. 0.04dB ITU-T G.657 : Avg. 0.02dB |
Fiber Splice Performance Splice Time *3 | SM FAST mode : Avg. 7 to 9sec. AUTO mode : Avg. 14 to 16sec. |
Applicable Protection Sleeve Sleeve Type Sleeve Length Sleeve Dia. | Heat shrinkable sleeve Max. 66mm Max. 6.0mm before shrinking |
Sleeve Heat Performance Heat Time *4 | 60mm slim mode : Avg. 9 to 10sec. 60mm mode : Avg. 13 to 15sec. |
| Fiber Tensile Test Force | Approx. 2.0N |
| Electrode Life *5 | Approx. 5000 splices |
Physical description Dimensions W Dimensions D Dimensions H Weight | Approx.170mm without projection Approx.173mm without projection Approx.150mm without projection Approx. 2.8kg including battery |
Environmental Condition Temperature | Operate : -10 to 50 degreeC Storage : -40 to 80 degreeC |
Environmental Condition Humidity | Operate : 0 to 95%RH non-condensing Storage : 0 to 95%RH non-condensing |
Environmental Condition Altitude | Max. 5000m |
AC Adaptor Input | AC100 to 240V, 50/60Hz, Max. 1.5A |
Battery Pack Type Output Capacity *6 Battery Life *7 | Rechargeable Lithium Ion Approx. DC14.4V, 6380mAh Approx. 300 splice and heat cycles Approx. 500 recharge cycles |
Battery Pack Temperature Recharge: Storage: |
0 to 40 degreeC -20 to 30 degreeC |
Display LCD Monitor Magnification | TFT 4.9 inches with touch screen 200 to 320x |
Illumination V-Grooves | LED lamp |
Interface PC External LED Lamp Ribbon Stripper Wireless *8 | USB2.0 Mini B type USB2.0 A type Approx. DC5V, 500mA Mini DIN 6pin DC12V, Max. 1A Bluetooth 4.1 LE |
Data Storage Splice Mode Heat Mode Splice Result Splice Image | 100 splice modes 30 heat modes 20000 splices 100 images |
| Screw Hole for Tripod | 1/4-20UNC |
Notes:
*1 Cleave length range depending on fiber type
5 to 16mm: 125μm cladding dia. and 250μm coating dia.
10 to 16mm: 125μm cladding dia. and 400 or 900μm coating dia.
5 to 10mm: 80μm cladding dia. and 160μm coating dia.
5 to 16mm: 150μm cladding dia. and 250μm coating dia.
*2 Measured with a cut-back method relevant to ITU-T and IEC standard after splicing Fujikura identical fibers.
The average splice loss changes depending on the environmental condition and fiber characteristics.
*3 Measured at room temperature.
The definition of splice time is from the fiber image appearing on LCD monitor to the estimated loss displayed.
The average splice time changes depending on the environmental conditions, fiber type, and fiber characteristics
*4 Measured at room temperature with the AC adapter.
The heat time is defined from the start beep sound to the finish beep sound.
The average heat time changes depending on the environmental conditions, sleeve type and battery pack condition.
*5 The electrode life changes depending on the environmental conditions, fiber type and splice modes
*6 Test condition
(1) Splice and heat time : 1 minute cycle
(2) Using the splicer power save settings
(3) Using a not degraded battery
(4) At room temperature
The battery capacity changes when testing with different conditions from the above
*7 The battery capacity decreases to a half after approx. 500 discharge and recharge cycles.
The battery life is shortened further when using outside of the storage temperature range, operating temperature range, if completely discharged by storing for a long time without recharging.
*8 Bluetooth® mark and logos are the registered trademarks of Bluetooth SIG, Inc.
Ressources
Ressources de fichiers
Fujikura Core Alignment Fusion splicer 90S+ Brochure
Ressources vidéos
Fujikura 90S+ Core Alignment Fusion Splicer
Fusion Splicing with the AFL / Fujikura 90S+
Aucun résultat ne correspond à votre recherche ?
Nous contacter
