You are browsing the EU site. Would you like to be redirected to another country or region to see content and products specific to your location?

Quick quote: Rohde & Schwarz SMW200A (1412.0000.02)

Rohde & Schwarz SMW200A (1412.0000.02)

Vector Signal Generator
Model
SMW200A (1412.0000.02)
Product Family
RF & Microwave Signal Generators
Manufacturer
Rohde & Schwarz

Configured models contain the following attributes:

RF & Microwave Signal GeneratorsVector Signal GeneratorsBenchtop
Configurations
Key Specs
Product Overview
Resources

Choose your configuration

Show:

Available Options for Rohde & Schwarz SMW200A (1412.0000.02)

OptionDescription
Frequency range: 100kHz to 12.75GHz for RF path A
Documentation of calibration values
Wideband baseband generator, 500 MHz RF bandwidth, 256 MSaemples, R&S®SMW-B13XT required, retrofittable in Rohde & Schwarz service (hardware option)
Baseband generator with realtime coder and ARB (64 MSamples), R&S®SMW-B13/B13T required, retrofittable in Rohde & Schwarz service (hardware option)
Signal routing and baseband main module, one I/Q path to RF section, retrofittable in factory only (hardware option)
Signal routing and baseband main module, two I/Q paths to RF section, retrofittable in factory only (hardware option)
Wideband baseband main module, two I/Q paths to RF section, nur im Werk nachrüstbar retrofittable only in factory (hardware option)
Fading simulator, R&S®SMW-B13/B13T and R&S®SMW-B10 required, retrofittable in Rohde & Schwarz service (hardware option)
Fading Simulator and signal processor, R&S®SMW-B13XT and R&S®SMW-B9 required, retrofittable in Rohde & Schwarz Service (hardware option)
FM/Phim modulator, frequency option (R&S SMW-B1xx/B2xx) and R&S SMW-B13T/B13XT required, retrofittable in factory only (hardware option)
Enhanced phase noise performance and FM/Phim modulator, frequency option (R&S SMW-B1xx/B2xx) and R&S SMW-B13T/B13XT required, retrofittable in factory only (hardware option)
Rear panel connectors for RF path A (3/6 GHz) and I/Q, R&S®SMW-B1003/B1006 required, retrofit only in Rohde & Schwarz service center with UCS (hardware option)
Phase coherence, retrofit in factory only (hardware option)
Solid state drive (hardware option)
Deeper chassis, prerequisite for R&S SMW-B2012, R&S SMW-B2031, R&S SMW-B2044, R&S SMW-B2044N, not installable post factory (hardware option)
Frequency range : 100kHz to 3GHz for RF path A,
Frequency range : 100kHz to 6GHz for RF path A, not installable post factory (hardware option)
Frequency range: 100 kHz to 7.5 GHz for RF path A, not installable post factory (hardware option)
Frequency range : 100kHz to 12.75GHz for RF path A, not installable post factory (hardware option)
Frequency range : 100kHz to 20GHz for RF path A, not installable post factory (hardware option)
Frequency range : 100 kHz to 31.8 GHz for RF path A, not installable post factory (hardware option)
Frequency range: 100 kHz to 40 GHz for RF path A, not installable post factory (hardware option)
100kHz to 44GHz Vector Signal Generator
Frequency range : 100kHz to 3GHz for RF path B, R&S SMW-B13T/B13XT required, retrofittable in factory only (hardware option)
Frequency range : 100kHz to 6GHz for RF path B, R&S SMW-B13T/B13XT required, retrofittable in factory only (hardware option)
Frequency range : 100kHz to 20GHz for RF path B, R&S SMW-B13T/B13XT required, retrofittable in factory only (hardware option)
Low phase noise for RF path A frequency option R&S®SMW-B10xx required, not installable post factory (hardware option)
Improved close in phase noise for RF path A, frequency option R&S®SMW-B10xx required, not installable post factory (hardware option)
Ultra low phase noise for RF path A, frequency option R&S®SMW-B10xx required
Improved close in phase noise for RF path B, R&S SMW-B710 in path A required, only installable together with frequency option R&S SMW-B20xx (hardware option)
Ultra low phase noise for RF path B, R&S SMW-B711 in path A required, only installable together with frequency option R&S SMW-B20xx (hardware option)
Frequency range: 100 kHz to 6 GHz for RF path A, not installable post factory (hardware option)
Frequency range: 100 kHz to 7.5 GHz for RF path A, not installable post factory (hardware option)
Frequency range: 100 kHz to 12.75 GHz for RF path A, not installable post factory (hardware option)
Frequency range: 100 kHz to 20 GHz for RF path A, not installable post factory (hardware option)
Frequency range: 100 kHz to 31.8 GHz for RF path A, not installable post factory (hardware option)
Frequency range: 100 kHz to 40 GHz for RF path A, not installable post factory (hardware option)
Frequency range: 100 kHz to 44 GHz for RF path A, not installable post factory (hardware option)
Frequency range: 100 kHz to 44 GHz for RF path A,I/Q modulation bandwidth max. 550 MHz (in RF), min. pulse width limited,
Frequency range: 100 kHz to 56 GHz for RF path A, not installable post factory (hardware option)
Frequency range: 100 kHz to 67 GHz for RF path A, not installable post factory (hardware option).
Frequency range: 100 kHz to 67 GHz for RF path A,I/Q modulation bandwidth max. 550 MHz (in RF), min. pulse width limited, not installable post factory (hardware option).
Frequency range: 100kHz to 6GHz for RF path B
Frequency range: 100 kHz to 7.5 GHz for RF path B, frequency option R&S�SMW-B1007 and R&S�SMW-B13T/B13XT required, not installable post factory (hardware option)
Frequency range: 100 kHz to 20 GHz for RF path B, frequency option R&S SMW-B10xx and R&S SMW-B13T/B13XT required, not installable post factory (hardware option)
Frequency range: 100 kHz to 44 GHz for RF path B, R&S SMW-B94L and R&S SMW-B13T/-B13XT required, not installable post factory (hardware option)
Differential analog I/Q outputs, R&S®SMW-B13/B13T required (software license)
Wideband differential analog I/Q outputs (R&S®SMW-B13XT required) (software license)
Digital baseband output, R&S®SMW-B13/B13T required (software license)
Digital baseband output for R&S®SMW wideband baseband R&S®SMW-B13XT required (software license)
Pulse modulator, frequency option R&S®SMW-B10xx/-B20xx required (software license)
High performance pulse generator, R&S®SMW-B13/B13T/B13XT required (software license)
Multi function generator, R&S®SMW-B13/B13T/B13XT required (software license)
GSM/EDGE, R&S®SMW-B9/B10 required (software license)
EDGE Evolution, R&S®SMW-K40 required (software license)
3GPP FDD, R&S®SMW-B9/B10 required (software license)
IEEE 802.16, R&S®SMW-B10 required (software license)
TD-SCDMA, R&S®SMW-B9/B10 required (software license)
TD-SCDMA enhanced BS/MS tests R&S®SMW-K50 required (software license)
IEEE 802.11a/b/g/n/j/p, R&S®SMW-B9/B10 required (software license)
EUTRA/LTE Release 8, R&S®SMW-B9/B10 required (software license)
Bluetooth® including Enhanced Data Rate, R&S®SMW-B9/B10 required (software license)
Multi carrier CW signal generation, R&S®SMW-B9/B10 required (software license)
Additional white Gaussian noise, R&S®SMW-B13/B13T/B13XT required (software license)
EUTRA/LTE closed-loop BS test, HARQ feedback, timing adjustment R&S®SMW-K55 required (software license)
Dynamic fading, R&S®SMW-B14 required (software license)
Enhanced fading models including Gauss- and Watterson-fading, R&S®SMW-B14 required (software license)
MIMO fading and routing, R&S®SMW-B13T, 2x R&S®SMW-B10 and 2x R&S®SMW-B14 or R&S®SMW-B13XT, 2x R&S®SMW-B9 and 2x R&S®SMW-B15 required (software license)
Multiple Entities, enables >2 baseband entities, 2x R&S®SMW-B10 and R&S®SMW-B13T or 2x R&S®SMW-B9 and R&S®SMW-B13XT required (software license)
Logfile generation; intermediate results and logfiles of the signal generation process, R&S SMW-K55 or R&S SMW-K115 or R&S SMW-K144required (software license)
EUTRA/LTE Release 9 and enhanced features, R&S®SMW-K55 required (software license)
EUTRA/LTE Release 10 (LTE Advanced), R&S®SMW-K55 required (software license)
IEEE 802.11ac R&S®SMW-K54 required (software license)
LTE Release 11 + enhanced features, R&S®SMW-K55 required (software license)
EUTRA/LTE Release 12
5G Air interface candidate
DVB-S2/DVB-S2X R&S®SMW-B9/B10 required (software license)
Verizon 5GTF Signals R&S SMW-B9/B10 required (software license)
IEEE 802.11ad R&S®SMW-B9 and R&S®SMW-K527 required (software license)
Digital Standard IEEE 802.11ax R&S®SMW-K54 required (software license)
5G New radio
5G NR Closed-Loop BS Test R&S®SMW-K144 required (software license)
5G New Radio Release 16 for R&S®SMW200A R&S®SMW-K144 required (software license)
Pulse sequencing external PC software required R&S®SMW-B9/B10 required (software license)
Enhanced pulse sequencing external PC software required (R&S®SMW-K300 required) (software license)
Digital Standard IEEE 802.11ax R&S®SMW-K254 and R&S®WinIQSIM2 required (software license)
Wideband Extended Sequencing for R&S®SMW-B9 (R&S®SMW-B9 erforderlich) (Software-Lizenz)
Realtime Control Interface (R&S SMW-K502 required) (software license)
HS upgrade PDW streaming
ARB memory extension to 512 MSamples, R&S®SMW-B10 required (software license)
ARB memory extension to 1 GSamples, R&S®SMW-B10 and R&S®SMW-K511 required (software license)
ARB memory extension to 2 Gsamples, R&S®-SMW-B9 required (software license)
Baseband extension to 160MHz RF bandwidth, R&S®SMW-B10 required (software license)
Baseband extension to 1 GHz RF bandwidth, R&S®SMW-B9 required (software license)
Baseband extension to 2 GHz RF bandwidth, R&S®SMW-B9 required (software license)
Baseband extension from 1 GHz to 2 GHz RF bandwidth, R&S®SMW-B9 and R&S®SMW-K525 required (software license)
Envelope tracking, R&S®SMW-B9/B10 and R&S®SMW-K17/K16 required (software license)
AM/AM, AM/PM Predistortion, R&S®SMW-B9/B10 and correspondent RF path required (software license)
User defined frequency response correction
Automated RF Port alignmt
Digital Doherty for Doherty Amplifier Development
External frontend control
100 MHz, 1 GHz ultra low noise reference input/output, frequency option R&S®SMW-B10xx required.
Flexible reference input (1 MHz to 100 MHz), frequency option R&S®SMW-B10xx required.
AM / FM / PhiM, frequency option R&S®SMW-B10xx/-B20xx and R&S®SMW-B13T/-B13XT required (software license)
Differential analog I/Q inputs for RF path A, frequency option R&S®SMW-B10xx required.
customized Dynamic Fading (requires K71)
19" adapter BW2010, cabinet 4HU 1/1

Showing 1 - 6 of 122 results

1
2
21
1

Vector signal generator, base unit

Product ID: P-653709

SMW-B10 (1413.1200.02) • Baseband generator with realtime coder and ARB (64 MSamples), R&S®SMW-B13/B13T required, retrofittable in Rohde & Schwarz service (hardware option)SMW-B140 (1413.0604.02) • Frequency range: 100 kHz to 40 GHz for RF path A, not installable post factory (hardware option)SMW-K522 (1413.6960.02) • Baseband extension to 160MHz RF bandwidth, R&S®SMW-B10 required (software license)SMW-B13 (1413.2807.02) • Signal routing and baseband main module, one I/Q path to RF section, retrofittable in factory only (hardware option)
Rent

Availability confirmed on quote

Quote

Buy Used

Availability confirmed on quote1

€126,019.00*€197,799.00

Source New

Enquire about our range of financial solutions

2

Vector signal generator, 20GHz

Product ID: P-181181

SMW-B1020 (1428.5107.02) • Frequency range: 100 kHz to 20 GHz for RF path A, not installable post factory (hardware option)SMW-B9 (1413.7350.02) • Wideband baseband generator, 500 MHz RF bandwidth, 256 MSaemples, R&S®SMW-B13XT required, retrofittable in Rohde & Schwarz service (hardware option)SMW-K144 (1414.4990.02) • 5G New radioSMW-B13XT (1413.8005.02) • Wideband baseband main module, two I/Q paths to RF section, nur im Werk nachrüstbar retrofittable only in factory (hardware option)SMW-K55 (1413.4180.02) • EUTRA/LTE Release 8, R&S®SMW-B9/B10 required (software license)
Rent

Availability confirmed on quote

Quote

Buy Used

In stock - usually ships in 5 days1

€93,680.00*€169,853.00

Source New

Enquire about our range of financial solutions

3

Vector signal generator, base unit, frequency option for RF path A (R&S®SMW-B1003/B1006/B1007/B1012)

Product ID: P-181179

SMW-B13XT (1413.8005.02) • Wideband baseband main module, two I/Q paths to RF section, nur im Werk nachrüstbar retrofittable only in factory (hardware option)SMW-B1020 (1428.5107.02) • Frequency range: 100 kHz to 20 GHz for RF path A, not installable post factory (hardware option)SMW-K42 (1413.3784.02) • 3GPP FDD, R&S®SMW-B9/B10 required (software license)SMW-B9 (1413.7350.02) • Wideband baseband generator, 500 MHz RF bandwidth, 256 MSaemples, R&S®SMW-B13XT required, retrofittable in Rohde & Schwarz service (hardware option)SMW-K144 (1414.4990.02) • 5G New radioSMW-K55 (1413.4180.02) • EUTRA/LTE Release 8, R&S®SMW-B9/B10 required (software license)
Rent

Availability confirmed on quote

Quote

Buy Used

In stock - usually ships in 5 days1

€116,622.00*€177,079.00

Source New

Enquire about our range of financial solutions

4

Vector signal generator, base unit, frequency option for RF path A (R&S®SMW-B1003/B1006/B1007/B1012)

Product ID: P-215782

SMW-K515 (1413.9360.02) • ARB memory extension to 2 Gsamples, R&S®-SMW-B9 required (software license)SMW-K527 (1414.6158.02) • Baseband extension from 1 GHz to 2 GHz RF bandwidth, R&S®SMW-B9 and R&S®SMW-K525 required (software license)SMW-K525 (1414.6129.02) • Baseband extension to 1 GHz RF bandwidth, R&S®SMW-B9 required (software license)SMW-B9 (1413.7350.02) • Wideband baseband generator, 500 MHz RF bandwidth, 256 MSaemples, R&S®SMW-B13XT required, retrofittable in Rohde & Schwarz service (hardware option)SMW-B13XT (1413.8005.02) • Wideband baseband main module, two I/Q paths to RF section, nur im Werk nachrüstbar retrofittable only in factory (hardware option)SMW-B90 (1413.5841.02) • Phase coherence, retrofit in factory only (hardware option)
Rent

Availability confirmed on quote

Quote

Buy Used

Availability confirmed on quote1

€192,412.00*€304,437.00

Source New

Enquire about our range of financial solutions

5

Vector signal generator, base unit, frequency option for RF path A (R&S®SMW-B1003/B1006/B1007/B1012)

Product ID: P-215780

SMW-K526 (1413.9318.02) • Baseband extension to 2 GHz RF bandwidth, R&S®SMW-B9 required (software license)SMW-B90 (1413.5841.02) • Phase coherence, retrofit in factory only (hardware option)SMW-K61 (1413.4280.02) • Multi carrier CW signal generation, R&S®SMW-B9/B10 required (software license)SMW-B9 (1413.7350.02) • Wideband baseband generator, 500 MHz RF bandwidth, 256 MSaemples, R&S®SMW-B13XT required, retrofittable in Rohde & Schwarz service (hardware option)SMW-K515 (1413.9360.02) • ARB memory extension to 2 Gsamples, R&S®-SMW-B9 required (software license)SMW-B13XT (1413.8005.02) • Wideband baseband main module, two I/Q paths to RF section, nur im Werk nachrüstbar retrofittable only in factory (hardware option)
Rent

Availability confirmed on quote

Quote

Buy Used

Availability confirmed on quote1

€145,610.00*€252,893.00

Source New

Enquire about our range of financial solutions

6

Vector signal generator, base unit, frequency option for RF path A (R&S®SMW-B1003/B1006/B1007/B1012)

Product ID: P-215752

SMW-B206 (1413.0904.02) • Frequency range : 100kHz to 6GHz for RF path B, R&S SMW-B13T/B13XT required, retrofittable in factory only (hardware option)SMW-K526 (1413.9318.02) • Baseband extension to 2 GHz RF bandwidth, R&S®SMW-B9 required (software license)SMW-B9 (1413.7350.02) • Wideband baseband generator, 500 MHz RF bandwidth, 256 MSaemples, R&S®SMW-B13XT required, retrofittable in Rohde & Schwarz service (hardware option)SMW-K544 (1414.3707.02) • User defined frequency response correctionSMW-B13XT (1413.8005.02) • Wideband baseband main module, two I/Q paths to RF section, nur im Werk nachrüstbar retrofittable only in factory (hardware option)SMW-K61 (1413.4280.02) • Multi carrier CW signal generation, R&S®SMW-B9/B10 required (software license)
Rent

Availability confirmed on quote

Quote

Buy Used

Availability confirmed on quote1

€113,812.00*€257,879.00

Source New

Enquire about our range of financial solutions

Showing 1 - 6 of 122 results

1
2
21
* Prices & availability are subject to change without notice. All prices may vary due to shipping terms, VAT or sales tax, import duties, and exchange rates. Products may not be available in all locations. Any listed savings are based on the full list price of new instruments and are indicative depending on date of list; actual savings may vary based on option(s), configuration, currency exchange rates, and other factors. Warranty may vary by category or specific available product. All terms to be confirmed by full written quote or available to review in the Payment page when you buy online.
1 For Certified Pre-Owned equipment, units go into 23-step certification checks before shipping and we will confirm timescales.

Can't find what you are looking for?

Get in touch
Can't find what you are looking for?
loader
loader logo