The VDS 200Q series is used to simulate the various battery supply waveforms recommended by international standards and by car manufacturer requirements. Especially the manufacturer requirements are an important area covered by the VDS 200Q series as there is a large variety of requirements. Secondly, the VDS 200Q series serve as powerful DC voltage supplies for the DUT during the tests with automotive transients.
The VDS 200Q series covers all three supply voltage categories (48 V, 24 V and 12 V). Their current capability ranges up to 100 A or more depending on the model and your application.
| Key Features |
| Voltage up to 60 V, 2 ranges |
| 80 V Extended Option |
| Current up to 200 A (600 A peak) |
| Four quadrant, bipolar amplifier |
| Fast step response time |
| Very Low Ri: <10 mOhm (Programmable 10 - 200 mOhm) |
| High Bandwidth up to 250 kHz |
| Sense lines for voltage drop correction |
| Temperature-controlled air cooling |
| Benefits |
|
| Best to Simulate Battery Supply Waveforms | The VDS 200Q is specifically designed to cope with almost every requirement of international and national as well as car manufacturer standards world-wide.
Its integrated DC amplifier with a frequency range up to 150 kHz allows to generate dips and drops, short interruptions and many kind of voltage variation representing various phenomena being measured on a wiring harness.
The VDS 200Q Series battery simulators are all four quadrant bipolar amplifiers able to absorb energy fed back from the DUT up to nominal current.
The VDS 200Q offers the QuickStart with parameters being adjustable during test to evaluate the susceptibility level of a DUT.
Pulse 4 and 2b as per ISO 7637-2 and many more car manufacturer specific waveforms are pre-programmed.
Together with an external signal generator (e.g. AutoWave) the VDS 200Q can generate most complex waveforms.
All models feature the lowest source impedance (Ri) on the market. VDS 200Qxxx.2 models have the ability to program the Ri up to 200 mOhms.
|
| Easy to Operate | Front panel menu and function keys enable the user to program his test routines quickly and accurately.
The cursor allows fast control of all test parameters of the programmed routine, thus test procedures are simplified and confidence is generated that every step is carried out correctly.
|
| ISO. Control Software for Control and Documentation | Outstanding user convenience, clearly structured windows and operation features and the EM TEST standards library along with the flexibility to generate user specific test sequences very easily are the main features of iso.control software.
The software is automatically configured according to the connected EM TEST generators.
iso.control software covers international/national standards and most of the manufacturer standards and is continuously updated.
Extensive reporting capabilities help the user to create test reports that meet international requirements.
iso.control is supported by Windows 2000, Windows XP, Windows Vista and Windows 7.
Remote control is achieved either via USB or GPIB. iso.control supports a wide range of GPIB cards of National Instruments.
|
| Specifications |
|
|
|
| VDS 200Q Series |
|
|
|
| Model Overview |
|
|
|
| Model | VDS 200Q10.1 | VDS 200Q25.2 | VDS 200Q50.2 |
| Output Range | -60 V - +60 V | -20 V to +80 V | -20 V to +80 V |
| Output Current | 0 A - 10 A, continuous | 0 A - 25 A, continuous | 0 A - 50 A, continuous |
| Peak Current | n/a | 75 A for 200 ms | 150 A for 200 ms |
| Bandwidth | Bandwidth -3dB;
DC - 180 kHz full signal
| DC - 150 kHz full signal | DC - 150 kHz full signal |
| Extended Envelope | n/a | -20 V - +80 V (20 A max.)
150 - 250 kHz (40 Vpp max.)
| -20 V - +80 V (40 A max.)
150 - 250 kHz (40 Vpp max.)
|
| Supply Voltage | 1-phase 100/120/230 V ±10%, L, N, PE | 1-phase 100/120/230 V ±10%, L, N, PE | 3-phase 200/400 V ±10%, L1, L2, L3, PE |
| Dimensions | 19"/6 HU | 19"/25 HU*) | 19"/25 HU*) |
| Weight | 37 kg | 230 kg | 275 kg |
| Specifications |
|
|
|
| VDS 200Q Series |
|
|
|
| Model Overview |
|
|
|
| Model | VDS 200Q100.2 | VDS 200Q150.2 | VDS 200Q200.2 |
| Output Range | -20 V to +80 V | -20 V to +80 V | -20 V to +80 V |
| Output Current | 0 A - 100 A, continuous | A - 150 A, continuous | 0 A - 200 A, continuous |
| Peak Current | 300 A for 200 ms | 450 A for 200 ms | 600 A for 200 ms |
| Bandwidth | DC - 150 kHz full signal | DC - 150 kHz full signal | DC - 150 kHz full signal |
| Extended Envelope | -20 V - +80 V (80 A max.)
150 - 250 kHz (40 Vpp max.)
| -20 V - +80 V (120 A max.)
150 - 250 kHz (40 Vpp max.)
| -20 V - +80 V (160 A max.)
150 - 250 kHz (40 Vpp max.)
|
| Supply Voltage | 3-phase 200/400 V ±10%, L1, L2, L3, PE | 3-phase 200/208 or 400 V ±10%, L1, L2, L3, PE | 3-phase 200/208 or 400 V ±10%, L1, L2, L3, PE
Connector: CEE 63 A
|
| Dimensions | 19"/38 HU**) | 2 x 19"/34 HU**) | 2 x 19"/34 HU**) |
| Weight | 450 kg | approx. 650 kg | approx. 900 kg |
Note:
** Rack mounted, prepared to also include AutoWave
| Specifications |
|
| VDS 200Q Series |
|
| Model Overview |
|
| Model | Description |
| VDS 200Q10.1 | Voltage Drop Simulator;
60 V / 10 A
|
| VDS 200Q25.2 | Voltage Drop Simulator;
60 V / 25 A
80 V / 20 A extended
|
| VDS 200Q50.2 | Voltage Drop Simulator;
60 V / 50 A
80 V / 40 A extended
|
| VDS 200Q100.2 | Voltage Drop Simulator;
60 V / 100 A
80 V / 80 A extended
|
| VDS 200Q150.2 | Voltage Drop Simulator;
60 V / 150 A
80 V / 120 A extended
|
| VDS 200Q200.2 | Voltage Drop Simulator;
60 V / 200 A
80 V / 160 A extended
|
