Configured models contain the following attributes:
Network & Fiber InstallationsOptical Spectrum AnalyzersPlease use 'Get Quick Quote' and we’ll contact you and quote for your exact need.
You can also get in touch, if you prefer, and our experts will be able to guide you with the right application and procurement solution for this product.
Please refer to the Resources section for Datasheets or see the Product Overview.
If you would like to know more, please get in touch and one of our team will be happy to help.
The VIAVI Pol-Mux OSCA-710 is the first Optical Spectrum and Correlation Analyzer that can perform in-band OSNR measurement in high speed, ROADM based DWDM networks using polarization multiplexing transmission formats without shutting down optical channels. This module uses a novel, proprietary spectral correlation measurement technique (VIAVI pat.) along with an ultra-high resolution coherent receiver for complete signal characterization in amplitude, frequency, phase and polarization.
Key Features:
Highlights:
Applications:
Specifications | |
OSCA-710 (1) | |
Spectral Wavelength/Frequency Range Abs. Wavelength Accuracy Resolution Bandwidth Min Channel Spacing for Signal Separation Number of Optical Channels Display Resolution | 1527.6 – 1565.50 nm /196.25 – 191.50THz ±10 pm / ± 1250 MHz < 1 pm / < 100 MHz < 8pm / <1 GHz Up to 256 0.001 nm / 100 MHz |
Power Input Power Range (per channel) (2) Max. Non-Destructive Total Power Noise Floor Abs. Power Accuracy (4) Display Resolution | -40 to +10 dBm +23 dBm <-65 dBm ±0.6 dB 0.01 dB |
OSNR OSNR Measurement Modes OSNR Measurement Range (3) OSNR Measurement Accuracy (3) Modulation Formats | Out-of-band (IEC 61280-2-9), In-band (spectral correlation) Up to > 30 dB ±0.5dB all formats supported incl. DP-xPSK, DP-xQAM and Nyquist shaped signals |
Chromatic Dispersion Measurement Mode Measurement Range | In-service measurement of the chromatic dispersion per channel Up to >50.000 ps/nm |
Measurement Modes Analysis Display | In-band OSNR, WDM, Drift, DFB, CD Graph, WDM Table, Graph + Table |
UTM-710: Utility Module | Required for systems with >8 channels and/or channel power <-20dBm. Includes optical pre-amplifier and optical pre-filter |
Optical Interfaces OSCA-710, UTM-710 Optical Adapters ORL | SM-APC Interchangeable, type 2150/00.xx FC, SC, ST, DIN >35 dB |
Temperature Operating Storage | +0 to +30°C / 32 to 86°F −20 to +60°C /-4 to 140°F |
Dimensions and Weight OSCA-710 Module UTM-710 Module | 39x250x305 mm / 1.5x9.8x12 in 1.8 kg / 4 lbs 39x250x305 mm / 1.5x9.8x12 in 1.8 kg / 4 lbs |
Notes:
(1) Unless otherwise specified, all specifications are based on a temperature of 23°C ±2°C with an FC/APC connector after warm-up
(2) Measured in 0.1nm bandwidth
(3) Valid for OSNR measurements according IEC 61280-2-9. For in-band OSNR measurements at 100Gps DP-QPSK signals and >-20dBm/ch: OSNR range = 10 to 25 dB, OSNR accuracy = ±1 dB
(4) For 100Gbit/s modulated signals
Specifications | |
OSCA-710 | |
Ordering Information | |
Part Number | Description |
2323/91.11 | OSCA-710 module |
2323/86.11 | UTM-710 module (requires factory upgrade) |
2323/93.12 | OSCA-710 Kit (incl. OSCA-710 + UTM-710 + TB/MTS-8000 MF) |