You are browsing the EU site. Would you like to be redirected to another country or region to see content and products specific to your location?
US
Quick quote: Megger MWA330A-47
Megger MWA330A-47
Three-Phase Ratio and Winding Resistance Analyzer; On Board Industrial Computer with 305 mm (12 in.) Touch Screen nominal 230 V, 50Hz
Model
MWA330A-47Product Family
Electrical & Power QualityManufacturer
MeggerConfigured models contain the following attributes:
Electrical & Power QualityTransformer and Motor TestingConfigurations
Key Specs
Product Overview
Resources
Let us help you with your exact configuration
Please use 'Get Quick Quote' and we’ll contact you and quote for your exact need.
You can also get in touch, if you prefer, and our experts will be able to guide you with the right application and procurement solution for this product.
Key Specs
Please refer to the Resources section for Datasheets or see the Product Overview.
If you would like to know more, please get in touch and one of our team will be happy to help.
Product Overview
The Megger MWA300 and 330A Transformer Winding Analyzers are here to offer you a faster, more efficient testing device through combining TTR and resistance testing in a single unit. This advanced 3-phase transformer test system provides complete ratio, phase and winding resistance measurements with only one 3-phase lead-set connection. What’s more, it offers portability, a reduced set-up time and increased job safety.
Once connected, the MWA300 performs DC resistance measurements on all high- and low-side windings without reconnection. It has an 8-terminal/6-winding resistance measurement capability and doesn’t need any inter-connected boxes, allowing you to test all 6 windings without having to disconnect and reconnect leads.
The MWA300 series saves you even more time by using a single software platform, PowerDB, which means you only need one set-up and one easy-to-use test form. The MWA300 series can be used effectively test power transformers, distribution transformers, CTs and VTs, and motors and generators.
The MWA330A comes equipped with a built-in computer that has a 305 mm (12 in) color display and touch-screen interface. The computer is designed to control the unit and it can store up to 100, 000 data sets.
| Key Features |
| Combines TTR and resistance testing in one box - faster, more efficient testing |
| 55% smaller, 40% lighter than individual instruments |
| Only one set of leads required - lighter, smaller and less expensive |
| One test form - easier, faster to complete |
| Built-in demagnetization |
| Benefits | |
| The following tests are easily performed with a single instrument | 3-phase turns ratio 3-phase winding resistance OLTC continuity (make-before-break) 3 phase core demagnetization Magnetic balance / flux distribution Excitation current Polarity and phase angle deviation Auto vector detection Heat-run test |
| Specifications | |
MWA3xx Three-Phase Ratio and Winding Resistance Analyzer | |
| Feature | Parameter |
| Input Power | MWA3xx: 108 to 132 V, (207 to 253 V*), 58 - 62 Hz, 660 VA MWA3XX-47: 207 to 253 V, (108 to 132 V*), 48 - 52 Hz, 660 VA |
| Internal Data Storage | MWA330A (built-in computer): up to 100,000 data sets (built-in computer) |
| Communication/Control Software | MWA3xx: PowerDB Lite MWA330A: Controlled via built-in industrial PC or external customer PC. The MWA330A’s internal computer is designed to control a limited number of Megger instruments including the DELTA4000 as well as the Megger S1 and MIT Series DC insulation testers. |
| Environmental | Operating: -10⁰ C to +50⁰ C (14⁰ F to 122⁰ F) Storage: -30⁰ C to +70⁰ C(-22⁰ F to +158⁰ F) Relative Humidity: 0-90% non-condensing |
Case | Ruggedized case (metal/plastic trim) with removable lid and soft-side pouch with carrying strap |
| Safety/EMC/Vibration | Conforms to the requirements of: IEC 61010-1:2010 ASTMD999.75, IEC 61326-1:2012* (both emissions and immunity) |
| Dimensions | 290 x 290 x 460 mm 11 x 11 x 18 in does not include handles |
| Weight | Standard Unit: 14.5 kg 32 lbs |
| Transformer Winding Phase Relationship | ANSI C57.12.70-1978 CEI/IEC 76-1:1993 and Publication 616:1978 AS-2374, Part 4-1982 (Australian Standard) DC Specifications (Winding resistance, LTC/continuity, core demagnetization, heat-run) |
| Excitation Current Specifications | Range and Accuracy: 0 to 500 mA, 3 digit resolution, ±(2% of reading + 1 digit) |
| AC Specifications (Turns Ratio, Winding Balance) | Range and Turns Ratio Accuracy: 8 V AC: ±0.1% (0.8 to 2000) ±0.25% (2001 to 4000) ±0.35% (4001 to 8000) 40 V AC: ±0.1% (0.8 to 2000) ±0.15% (2001 to 4000) ±0.3% (4001 to 10,000) ±0.35% (10,001 to 25,000) 80 V AC: ±0.1% (0.8 to 2000) ±0.15% (2001 to 4000) ±0.25% (4001 to 10,000) ±0.30% (10,001 to 45,000) |
| Phase Specifications | Input voltages: 8, 40, and 80 V AC Range and Accuracy: ±90 degrees, 2 decimal points for the degree display, or for the centi-radian display Accuracy: ±3 minutes (from 0.8:1 – 2,000:1) |
Note:
* Input fuse change required - 6.3A fuse for 120 V nominal and 4.0A fuse for 230 V nominal line input.
| Specifications | |
MWA 3xx Series 3-Phase Ratio and Winding Resistance Analyzer | |
| Model Overview | |
| Model | Description |
| Externally controlled Model MWA 300 Series | |
| MWA300 | 3-Phase Winding Analyzer, remote control only, nominal 120 V, 60 Hz* |
| MWA300-47 | 3-Phase Winding Analyzer, remote control only, nominal 230 V, 50 Hz* |
| Built-in Computer Model MWA 330A Series | |
| MWA330A | 3-Phase Winding Analyzer, on board industrial computer with 305 mm (12 in.) touch screen nominal 120 V, 60Hz* |
| MWA330A-47 | 3-Phase Winding Analyzer, on board industrial computer with 305 mm (12 in.) touch screen nominal 230 V, 50Hz* |
| Included Accessories | AC power cord (IEC60320-C13 to US Standard) (MWA300/330A only) AC power cord (IEC60320-C13 to EU Standard) AC power cord (to UK Standard) (MWA300-47 and MWA330A-47 only) USB 2.0 standard type A to B Cable 2 m (7 ft) USB memory stick contains: user guide, PowerDB Lite, software related documents Quick Guide, EN/ES/DE/FR Ground lead, 9 m (30 ft) Canvas carrying bag |
Optional Accessories (3-phase, 4-wire shielded test lead sets compatible with MTO3xx, MWA3xx & TTR3xx series instruments (up to 10A max), complete with color-coded Kelvin clamps) | |
| 2008-30-KIT | 3-phase universal, 9 m (30 ft) H & X |
| 2008-60-KIT | 3-phase universal, 18 m (60 ft) H & X |
| 2008-100-KIT | 3-phase universal, 30 m (100 ft) H & X |
| 2008-113-30 | 3-phase universal, 9 m (30 ft) H |
| 2008-114-30 | 3-phase universal, 9 m (30 ft) X |
| 2008-113-60 | 3-phase universal, 18 m (60 ft) H |
| 2008-114-60 | 3-phase universal, 18 m (60 ft) X |
| 2008-113-100 | 3-phase universal, 30 m (100 ft) H |
| 2008-114-100 | 3-phase universal, 30 m (100 ft) X |
| 36486-7 | 3-phase universal,10 m (33 ft) X, Extension |
| 36486-8 | 3-phase universal, 10 m (33 ft) H, Extension |
| 36486-9 | 3-phase universal, 10 m (33 ft) H & X Extension |
| 1007-502 | Remote tap controller, manual operation, model RTC-1, complete with quick guide, and red/black/white (total 3) alligator clips |
| 1004-639 | HV strobe c/w 18 m (60 ft) lead |
| 1006-512-2 | Verification resistor, 10A,10 m ohms |
| 2005-115 | Foam lined transit case |
| Y550055 | Turns ratio calibration standard |
| 2001-766 | Soft padded carrying case |
Note:
* Please refer to Input Power under Specifications above for details.
Resources
File resources
Megger MWA300/330A 3-Phase Ratio and Winding Resistance Analyzer Data Sheet
Can't find what you are looking for?
Get in touch
