Keysight Technologies N9042B

Opción ID	Descripción
C91CMM-271	N9042RTEB-1FP Real-time analysis, up to 2 GHz BW, Basic Detection, Node Locked Perpetual License
C91CMM-272	N9042RTFB-1FP Real-time analysis, up to 2 GHz BW, Optimum Detection, Node Locked Perpetual License
C91CMM-317	N90EMRBEB-1FP Resolution Bandwidth Extended, node locked perpetual license
N9042-60706	SHC, 4GHz BW, with ODI streaming
N9042-60718	SHC, 4GHz BW, with ODI streaming, 75GHz
N9042B-526	Frequency Range, 2 Hz to 26.5 GHz
N9042B-575	Frequency Range, 2 Hz To 75 GHz
N9042B-C10	RF input Connector, 1.0 mm, male
N9042B-CFG014	UXA Signal Analyzer Extended with options
N9042B-G2H	Gen 2 HW
N9042B-PCA	Hex core 64-bit high performance processor, 32GB RAM, M.2 NVMe SSD
N9042B-R10	Analysis Bandwidth, 1 GHz
N9042B-RRT	Real-Time Spectrogram Streaming
N9042B-ST2	2 GHz IQ streaming
N9042SA2E-F12	N9042SA2E-C12 Signal Analyzer Core Software - UXA Extended Node-Locked Perpetual License, 1 year
W11	Operating System, Windows 11 IoT LTSC

Atributo	Valor
High Frequency (range)	20GHz <= 50GHz
Low Frequency (range)	DC <= 1kHz
Form Factor	Benchtop

Vista general del producto

The N9042B Signal Analyzer sets a new level of performance for high frequency measurements. Frequency options up to 50 GHz cover the current 5GNR FR1 and FR2 bands, as well as most radar, EW, and satellite bands.

Analysis bandwidth can be configured to 1 GHz; 1.5 GHz, 2 GHz, 4 GHz; and even up to 11 GHz bandwidth using an external digitizer.

A completely new front end provides low noise performance and high-dynamic range, addressing applications in Tx test, such as EVM and other modulation quality tests – while also excelling at measurements of low-level and unknown signals.

Key Features

Ensure your designs meet the latest standards with ready-to-use measurement applications and signal analysis software

See signals clearly with an unbanded, preselected sweep from 2 Hz to 110 GHz and 11 GHz of analysis bandwidth

Test the true performance of your 5G NR transmitter with the industry's best error vector magnitude (EVM)

Find out-of-band emissions or spurs quickly in your radar designs with the industry's best swept displayed average noise level (DANL)

Develop high-throughput satellite communication designs with 4 GHz of corrected analysis bandwidth

Specifications
N9042B UXA X-Series Signal Analyzer
Features	Parameters
Temperature Range	Operating: 0 to 40 °C Altitude: 4,600 m (approx. 15,000 feet) Maximum Relative Humidity: 95% non-condensing
Power Requirements	Voltage and Frequency (nominal): 100/120V, 50/60/400Hz 220/240V, 50/60Hz Rated Output Power: 850W Note: The instruments can operate with mains supply voltage fluctuations up to ± 10% of the nominal voltage
Display	Resolution: 1280 x 800 Size: 357 mm (14.1 in.) diagonal (nominal) capacitive multi-touch screen
Data Storage	Internal: Removable solid-state drive (≥ 256 GB) External: Supports USB 3.0/2.0 compatible memory devices
Weight (without options)	Net: 38.6 kg (nominal) Shipping: 53.9 kg (119 lbs) (nominal)
Dimensions	Height: 281 mm (11 in) Width: 459 mm (18 in) Length: 575 mm (22.6)
CPU	Modular, upgradeable; Intel i7, 6-core, 1.9 GHz clock, 8 GB DDR4 DRAM; includes secure memory for instrument cal data
SSD (Solid-State Drive)	256 GB, removeable
Operating System	Windows-10, Enterprise

Specifications
N9042B UXA X-Series Signal Analyzer
Model Overview
Model / Option Number	Description	Additional Information
Frequency Range
N9042B-526	Frequency range, 2 Hz to 26.5 GHz	-
N9042B-544	Frequency range, 2 Hz to 44 GHz	-
N9042B-550	Frequency range, 2 Hz to 50 GHz	-
Analysis Bandwidth
N9042B-R10	Analysis Bandwidth, 1 GHz	-
N9042B-R15	Analysis Bandwidth, 1.5 GHz	-
N9042B-R20	Analysis Bandwidth, 2 GHz	-
N9042B-R40	Analysis Bandwidth, 4 GHz	-
	Analysis Bandwidth, 11 GHz	See N9042B-CRW in Select Connection Options
Attenuator
Standard	Mechanical attenuator	2 dB steps, 0 to 70 dB; licensed as N9042B-FSA
N9040B-EA3	Electronic attenuator up to 3.6 GHz	Add in addition to the mechanical attenuator; 1 dB steps, 0 to 24 dB
Performance Options
Standard	Digital processor with 4 GB capture memory	Licensed as N9042B-DP4
Standard	Enhanced phase noise performance	DDS-based LO assembly; licensed as N9042B-EP0
Standard	External mixing	Provides external mixing with Keysight and third-party mixers; single port 1 for LO out and IF in (SMA female); licensed as N9042B-EXM
Standard	Fast sweep capability	Improves sweep speed at swept mode; licensed as N9042B-FS1 and FS2
Standard	LO/IM nulling	Minimizes the LO feed-thru and the intermodulation distortion; licensed as N9042B-NUL
Standard	Low noise path	Improves sensitivity (DANL) in frequency bands above 3.6 GHz without degrading dynamic range; licensed as N9042B-LNP
Standard	Microwave preselector bypass	Bypass the microwave preselector for wider bandwidth IF; licensed as N9042B-MPB
Standard	Full bypass path	Bypass the microwave preselector and enable the low noise path for improved sensitivity above 3.6 GHz; standard in instruments when Option R10, R15, R20 or R40 is installed; licensed as N9042B-FBP
Standard	Precision frequency reference	Aging rate: ± 1 x 10-7/year; licensed as N9042B-PFR
Standard	Noise floor extension	Improves analyzer’s DANL performance; licensed as N9042B-NF2
Standard	Enhanced display package	Includes spectrogram, trace zoom, and zone span in SA mode; licensed as N90E1EDPB
Standard	Fast power, up to maximum available analysis bandwidth	Accelerate power measurements such as ACPR; licensed as N90E1FP2B
Preamplifier
N9042B-P26	Preamplifier, 26.5 GHz	Compatible with N9042B-526 only
N9042B-P44	Preamplifier, 44 GHz	Compatible with N9042B-544 only
N9042B-P4L	Preamplifier, 44 GHz, basic	Compatible with N9042B-544 only; non-IVL, no export control
N9042B-P50	Preamplifier, 50 GHz	Compatible with N9042B-550 only
N9042B-P5L	Preamplifier, 50 GHz, basic	Compatible with N9042B-550 only: non-IVL, no export control
Standard	Low noise amplifier	Licensed as N9042B-LNA
PC Security
N9042B-SF1	Security features, exclude launching programs	Prevents the launching of Windows programs from the instrument application
N9042B-SF2	Security features, prohibit saving results	Prevents instrument application from saving/recall of measurement results or user configurations to/from instrument’s data storage
N9042B-SS1	Additional removable solidstate drive, Win10	Provides a fully-imaged, removable SSD in addition to the one installed in instruments, with Windows 10 operating system
Source Connectivity
N9042B-ESC	External source control	External source control for selected Keysight EXG, MXG, and PSG signal generators; supports external mixing; includes 3 BNC cables and 1 cross-over LAN cable
Connection Options
N9042B-ALV	Auxiliary log video output	Fast rise time video out; output on Aux IF connector
N9042B-YAV	Y-axis video output	Screen video (0-1 volt open circuit); log video and linear video
N9042B-CRP	Connector rear, programmable IF output	IF out 10 to 75 MHz (in 500 kHz steps); output on Aux IF connector at rear panel
N9042B-CRW	Connector, IF out, wide	Enables front panel Wide IF Out connector that provides 11 GHz BW IF signal from the internal wideband signal paths. Is required for N9042BEDC, External Digitizer Control

The V3050A Frequency Extender can be combined with the N9042B, to extend the maximum frequency up to 110 GHz. The V3050A features a low-noise design for outstanding sensitivity; a preselector filterbank to eliminate image responses; fundamental mixing for high dynamic range; and a “remote head” form-factor that interfaces seamlessly to the N9042B. The N9042B supports the X-series family of multi-touch applications, as well as the 89600 VSA software. A new CPU performs compute-intensive measurements, such as demodulation and EVM, up to 40% faster than prior analyzers.

V3050A Frequency Extender Option
Option	Frequency Range
F06	50 GHz to 67 GHz
F09	50 GHz to 90 GHz*
F11	50 GHz to 110 GHz**

Notes:

* Opt ion F09 conforms to limit ations governing export to restricted countries (does not require IVL ). When used for w ide-bandwidth analysis (IQ), the highest allowed frequency (at center of bandwidth) is reduced by ½ of the maximum bandw idth that is configured (optional licenses) for a given instrument. For example, with option R20 licensed (2 GHz analy sis bandwidth), the maximum center frequency allowed is 89 GHz.

** I VL required for export to restricted countries