You are browsing the ES site. Would you like to be redirected to another country or region to see content and products specific to your location?

Presupuesto Rápido: Rohde & Schwarz FSWP26 (1322.8003.26)

Rohde & Schwarz FSWP26 (1322.8003.26)

Phase Noise Analyzer; 1 MHz to 26.5 GHz
Modelo
FSWP26 (1322.8003.26)
Familia de productos
RF & Microwave Power
Fabricante
Rohde & Schwarz

Los modelos configurados tienen las siguientes opciones:

RF & Microwave PowerNoise & OtherNoise Test Sets
Configuraciones
Especificaciones clave
Vista general del producto
Recursos

Escoger su configuración

Show:

Opciones disponibles para Rohde & Schwarz FSWP26 (1322.8003.26)

Opción IDDescripción
Signal and spectrum analyzer 10 Hz to 26 GHz for R&S®FSWP26 (hardware option, retrofittable in factory)
High stability OCXO
Resolution BW >10MHz
Resolution bandwidth up to 80 MHz, 20 MHz and 50 MHz additionally, for R&S FSWP8 and R&S FSWP26, option R&S FSWP-B1 required (hardware option)
External generator control Retrofittable in Rohde&Schwarz service (hardware option)
High pass filter improved dynamic range for measurement of harmonics, suppression of fundamental signals from 300 MHz to 1.8 GHz, option R&S®FSWP-B1 required (software license)
Solid state drive, 64 GB with analyzer firmware for exchange against standard SSD for instruments with IPC11 CPU board (hardware option)
Support for harmonic mixers, includes LO/IF ports for external mixers for R&S®FSWP for x-corr option FSWP-B64 required (hardware option)
RF Preamplifier, 20 dB 100 kHz to 26 GHz for R&S®FSWP26 option R&S®FSWP-B1 required (hardware option)
Cross correlation
Cross correlation for phase noise analyzer R&S FSWP26 from 1 MHz to 26 GHz (hardware option)
Cross correlation for phase noise analyzer R&S®FSWP26 from 1MHz to 26GHz Low phase noise, includes R&S®FSWP-B4, excludes option R&S®FSWP-B60 (hardware option)
Signal source for additiv
Signal source for additive phase noise measurement, model dependent 10 MHz to max. 18 GHz, 0.1 dB steps
Extension to 80 MHz signal analysis bandwidth, includes microwave preselector bypass option R&S®FSWP-B1 required (software license)
Extension to 320 MHz signal analysis bandwidth (retrofit in service) (hardware option)
All software options active
Measurement application for pulsed phase noise and additive pulsed phase noise (software license)
Pulse measurement application R&S®FSWP-B1 required (software license)
Pulse stability measureme
Time Sidelobe Measurment
Modulation analysis application for modulation analysis of analog (AM, FM, PM) modulated single carrier signals, R&S®FSWP-B1 required (software license)
Noise figure measurement application noise source required, R&S®FSWP-B1 required Preamplifier R&S®FSWP-B24 recommended (software license)
Security Write Protection
Measurement application for detection and display of low level spurious signals (software license)
Transient measurement application (software license)
Chirp analysis extension
Hopping analsis extension
Vector signal analysis for modulation analysis on digital modulated single carrier signals R&S®FSWP-B1 required (software license)
Upgrade of internal signal source for additive phase noise meas.
Windows 10

Mostrando 1 - 6 de 34 resultados

1
2
6
1

Phase noise analyzer and VCO tester 1 MHz to 26.5 GHz optionally with cross correlation and spectrum

ID de producto: P-605572

FSWP-B4 (1325.3890.02) • High stability OCXOFSWP-B8 (1325.5028.26) • Resolution bandwidth up to 80 MHz, 20 MHz and 50 MHz additionally, for R&S FSWP8 and R&S FSWP26, option R&S FSWP-B1 required (hardware option)FSWP-B24 (1325.3725.26) • RF Preamplifier, 20 dB 100 kHz to 26 GHz for R&S®FSWP26 option R&S®FSWP-B1 required (hardware option)FSWP-B60 (1322.9800.26) • Cross correlation for phase noise analyzer R&S FSWP26 from 1 MHz to 26 GHz (hardware option)FSWP-B1 (1322.9997.26) • Signal and spectrum analyzer 10 Hz to 26 GHz for R&S®FSWP26 (hardware option, retrofittable in factory)FSWP-B64 (1322.9900.27) • Signal source for additive phase noise measurement, model dependent 10 MHz to max. 18 GHz, 0.1 dB steps
Alquiler

Confirmado en Presupuesto

Presupuesto

Seminuevo

Disponibilidad confirmada en el presupuesto

Contáctenos

Soluciones Financieras

Pregunte ahora para conocer más

2

Phase noise analyzer and VCO tester 1 MHz to 26.5 GHz optionally with cross correlation and spectrum

ID de producto: P-605556

FSWP-B61 (1325.3719.26) • Cross correlation for phase noise analyzer R&S®FSWP26 from 1MHz to 26GHz Low phase noise, includes R&S®FSWP-B4, excludes option R&S®FSWP-B60 (hardware option)FSWP-B24 (1325.3725.26) • RF Preamplifier, 20 dB 100 kHz to 26 GHz for R&S®FSWP26 option R&S®FSWP-B1 required (hardware option)FSWP-B1 (1322.9997.26) • Signal and spectrum analyzer 10 Hz to 26 GHz for R&S®FSWP26 (hardware option, retrofittable in factory)FSWP-B64 (1322.9900.27) • Signal source for additive phase noise measurement, model dependent 10 MHz to max. 18 GHz, 0.1 dB stepsFSWP-B8 (1325.5028.26) • Resolution bandwidth up to 80 MHz, 20 MHz and 50 MHz additionally, for R&S FSWP8 and R&S FSWP26, option R&S FSWP-B1 required (hardware option)
Alquiler

Confirmado en Presupuesto

Presupuesto

Seminuevo

Disponibilidad confirmada en el presupuesto

Contáctenos

Soluciones Financieras

Pregunte ahora para conocer más

3

Phase noise analyzer and VCO tester 1 MHz to 26.5 GHz optionally with cross correlation and spectrum

ID de producto: P-605601

FSWP-K4 (1325.5034.02) • Measurement application for pulsed phase noise and additive pulsed phase noise (software license)FSWP-B4 (1325.3890.02) • High stability OCXOFSWP-B60 (1322.9800.08) • Cross correlationFSWP-B1 (1322.9997.26) • Signal and spectrum analyzer 10 Hz to 26 GHz for R&S®FSWP26 (hardware option, retrofittable in factory)FSWP-B64 (1322.9900.27) • Signal source for additive phase noise measurement, model dependent 10 MHz to max. 18 GHz, 0.1 dB steps
Alquiler

Confirmado en Presupuesto

Presupuesto

Seminuevo

Disponibilidad confirmada en el presupuesto

Contáctenos

Soluciones Financieras

Pregunte ahora para conocer más

4

Phase noise analyzer and VCO tester 1 MHz to 26.5 GHz optionally with cross correlation and spectrum

ID de producto: P-607787

FSWP-B24 (1325.3725.26) • RF Preamplifier, 20 dB 100 kHz to 26 GHz for R&S®FSWP26 option R&S®FSWP-B1 required (hardware option)FSWP-K4 (1325.5034.02) • Measurement application for pulsed phase noise and additive pulsed phase noise (software license)FSWP-B1 (1322.9997.26) • Signal and spectrum analyzer 10 Hz to 26 GHz for R&S®FSWP26 (hardware option, retrofittable in factory)FSWP-K7 (1325.4238.02) • Modulation analysis application for modulation analysis of analog (AM, FM, PM) modulated single carrier signals, R&S®FSWP-B1 required (software license)FSWP-B80 (1325.4338.02) • Extension to 80 MHz signal analysis bandwidth, includes microwave preselector bypass option R&S®FSWP-B1 required (software license)FSWP-K6 (1325.4221.02) • Pulse measurement application R&S®FSWP-B1 required (software license)
Alquiler

Confirmado en Presupuesto

Presupuesto

Seminuevo

Disponibilidad confirmada en el presupuesto

Contáctenos

Soluciones Financieras

Pregunte ahora para conocer más

5

Phase noise analyzer and VCO tester 1 MHz to 26.5 GHz optionally with cross correlation and spectrum

ID de producto: P-245911

FSWP-K6S (1325.5363.02) • Time Sidelobe MeasurmentFSWP-K50 (1338.3358.02) • Measurement application for detection and display of low level spurious signals (software license)FSWP-B64 (1322.9900.27) • Signal source for additive phase noise measurement, model dependent 10 MHz to max. 18 GHz, 0.1 dB stepsFSWP-B21 (1325.3848.02) • Support for harmonic mixers, includes LO/IF ports for external mixers for R&S®FSWP for x-corr option FSWP-B64 required (hardware option)FSWP-B1 (1322.9997.26) • Signal and spectrum analyzer 10 Hz to 26 GHz for R&S®FSWP26 (hardware option, retrofittable in factory)FSWP-K70 (1325.4280.02) • Vector signal analysis for modulation analysis on digital modulated single carrier signals R&S®FSWP-B1 required (software license)
Alquiler

Confirmado en Presupuesto

Presupuesto

Seminuevo

Disponibilidad confirmada en el presupuesto

Contáctenos

Soluciones Financieras

Pregunte ahora para conocer más

6

Phase noise analyzer and VCO tester 1 MHz to 26.5 GHz optionally with cross correlation and spectrum

ID de producto: P-366356

FSWP-B1 (1322.9997.26) • Signal and spectrum analyzer 10 Hz to 26 GHz for R&S®FSWP26 (hardware option, retrofittable in factory)FSWP-B21 (1325.3848.02) • Support for harmonic mixers, includes LO/IF ports for external mixers for R&S®FSWP for x-corr option FSWP-B64 required (hardware option)FSWP-B24 (1325.3725.26) • RF Preamplifier, 20 dB 100 kHz to 26 GHz for R&S®FSWP26 option R&S®FSWP-B1 required (hardware option)FSWP-B8 (1325.5028.26) • Resolution bandwidth up to 80 MHz, 20 MHz and 50 MHz additionally, for R&S FSWP8 and R&S FSWP26, option R&S FSWP-B1 required (hardware option)FSWP-B64 (1322.9900.27) • Signal source for additive phase noise measurement, model dependent 10 MHz to max. 18 GHz, 0.1 dB stepsFSWP-B4 (1325.3890.02) • High stability OCXO
Alquiler

Confirmado en Presupuesto

Presupuesto

Seminuevo

Disponibilidad confirmada en el presupuesto

Contáctenos

Soluciones Financieras

Pregunte ahora para conocer más

Mostrando 1 - 6 de 34 resultados

1
2
6
* Los precios y la disponibilidad están sujetos a cambios sin previo aviso. Todos los precios pueden variar debido a los términos de envío, el IVA o el impuesto de ventas, los aranceles de importación y los tipos de cambio. Los productos pueden no estar disponibles en todas las ubicaciones. Cualquier ahorro listado se basa en el precio de lista completo de instrumentos nuevos; Los ahorros reales pueden variar según las opciones, la configuración, los tipos de cambio de divisas y otros factores. La garantía puede variar según la categoría o el producto específico disponible. Todos los términos deben ser confirmados en el presupuesto por escrito.

¿No encuentra lo que está buscando?

Póngase en contacto con nosotros
¿No encuentra lo que está buscando?
loader
loader logo