Productos Fabricantes Servicios Soluciones Resources Promociones About Us

Presupuesto Rápido: Itech IT7915-350-90

(+34) 91 076 21 90¿Necesita ayuda? Hable con nuestros expertos.

Itech IT7915-350-90

Regenerative Grid Simulator; 350V / 90A / 15kVA

Modelo

IT7915-350-90

Familia de productos

Power Supplies / Electronic Loads

Fabricante

Itech

Los modelos configurados tienen las siguientes opciones:

Power Supplies / Electronic LoadsRegenerative Power Supplies

Configuraciones

Especificaciones clave

Vista general del producto

Recursos

Permítanos ayudarlo con su configuración exacta

Utilice "Presupuesto Rápido" y nos pondremos en contacto con usted y le cotizaremos para su necesidad exacta.

También puede ponerse en contacto, si lo prefiere, y nuestros expertos podrán orientarlo con la aplicación y la solución de adquisición adecuadas para este producto.

Vista general del producto

The IT7900 series is a programmable, four-quadrant grid simulator. It is also a four-quadrant power amplifier, which can be used to test various grid-connected equipment. For example, PCS, energy storage system, microgrid, BOBC (V2X), PHiL, etc. With the islanding mode (RLC settable), a single unit of IT7900 can realize the anti-islanding protection test. Besides, the power density of IT7900 series is very high, 15kVA in 3U. After parallel connection, the power can be extended to 960kVA at most.

Key Features

High power density/minimum rack space, 3U up to 15kVA,16Hz~150Hz

Regenerative grid simulator & full 4-Quadrant AC&DC power sources

Power Amplifier function for PHiL applications

Professional anti-islanding test mode, can set and simulate the RLC (resistive-inductive-capacitive), active and reactive power circuit for anti-islanding detection

CC/CV/CP modes

AC, DC, AC+DC or DC+AC output capability

Comprehensive working modes selectable: single-phase, three-phase, reversed phase and multi-channel

Programmable Output Impedance, allows simulation of Real-World Utility Grid Impedance

Compliance tests incl LVRT /Phase Jump/Frequency variation/Harmonic Injection

Supported regulatory testing include IEC61000-4-11/4-13/4-14/4-28 etc

Benefits
Regenerative 4-Quadrant AC Grid Simulator	The IT7900 series represent the newest generation of programmable, full four-quadrant grid simulators with full 100% of current rating in both source and sink mode, and provides energy recovery capability. The power generated by the DUT during the test can be easily fed back to the AC grid, rather than being dissipated as heat,which protects the environment and lowers the cost of operation. It can be applied to the applications in testing grid-tied products that inject energy into the grid, such as the frequency changes, voltage transients and DC injection of grid-tied/off-grid inverters testing.
Full 4-Quadrant Power Amplifier	The IT7900 series regenerative grid simulator can be used as a power amplifier to complete power hardware in the loop (PHIL) applications for microgrids, energy storage and new energy vehicles. The digital I/O or a standard suite of analog signal can be input via an external analog interface (optional) and then amplified without distortion to a real power waveshape with an external analog response time of less than 200us.
Anti-Islanding Test Mode	To meet the certification test of anti-islanding effect for grid-tied products, the IT7900 series provide a professional anit-islanding test mode. Users can adjust RLC parameters or configure the parameters of active power and reactive power to achieve the effect of simulating purely resistive or nonlinear grid loads, and further verify the anti-islanding protection response time of grid-tied DUTs under different equivalent impedances, three-phase load balancing and non-balancing conditions. The solution helps engineers to simplify the test circuit and cost savings of additional equipment such as oscilloscopes and power meters.
Master/Slave Parallel, Power up to 960kVA	IT7900 series can be master-slave paralleled to get higher current and power. Maximum 64 sets can be paralleled to reach 960kVA, the parallel is flexible and convenient. IT7900 comes with synchronous On/Off input and output signals, which ensure the synchronization of paralleling and ensures synchronous current sharing of multiple modules. After paralleling, all functions are retained and there’s no loss of accuracy, making the construction of the power system faster, more flexible, and more economical, either it is a stand-alone test or ATE system.
Trend Analysis	Thanks to the function of large data recording, IT7900 series is capable of recording up to 7 hours of continuous data at short intervals (fastest: 100ms). And it’s easy to view the complete curve generating from the start to the end of the test by the mode ‘trend’. There are six curves that can be displayed at the same time at most. In addition, you can slide the vernier calipers on the screen to check the exact data at a particular point in the current trend curves. It is useful for analyzing errors during test for a long time or inflection points during loading, etc. Besides, you can export the test data for further analysis by a USB.
Built-in Various Type of Distorted Waveforms	In addition to sine waveform, IT7900 series provides various standard AC waveforms, such as triangular wave, sawtooth wave, square wave, trapezoidal wave and clipped sine wave. These waves can be easily recall from the menu and displayed in the LCD touch screen. Moreover, in combination with sequence programming function, users can realize multiple waveform continuous output, to cope with complex power line disturbance test.

Specifications
IT7900 Regenerative Grid Simulator
Model Overview
Model	Voltage	Current	Power	Resolution	Accuracy	Interface	Size
IT7905-350-30U	350 V	30 A	5 kVA	0.01V/0.01A	＜0.01%+0.01%FS/＜0.3%+0.3%FS	USB, CAN, LAN, digital I/O, optional GPIB / analog & RS232	3 u
IT7906-350-90	350 V	90 A	6kVA	0.01V/0.01A	＜0.1%+0.1%FS/＜0.3%+0.3%FS	USB, CAN, LAN, digital I/O, optional GPIB / analog & RS232	3 u
IT7909-350-90	350 V	90 A	9kVA	0.01V/0.01A	＜0.1%+0.1%FS/＜0.3%+0.3%FS	USB, CAN, LAN, digital I/O, optional GPIB / analog & RS232	3 u
IT7912-350-90	350 V	90 A	12kVA	0.01V/0.01A	＜0.1%+0.1%FS/＜0.3%+0.3%FS	USB, CAN, LAN, digital I/O, optional GPIB / analog & RS232	3 u
IT7915-350-90	350 V	90 A	15kVA	0.01V/0.01A	＜0.1%+0.1%FS/＜0.3%+0.3%FS	USB, CAN, LAN, digital I/O, optional GPIB / analog & RS232	3 u
IT7930-350-180	350 V	180 A	30kVA	0.01V/0.01A	＜0.1%+0.1%FS/＜0.3%+0.3%FS	USB, CAN, LAN, digital I/O, optional GPIB / analog & RS232	6 u
IT7945-350-270	350 V	270 A	45kVA	0.01V/0.01A	＜0.1%+0.1%FS/＜0.3%+0.3%FS	USB, CAN, LAN, digital I/O, optional GPIB / analog & RS232	15 u
IT7960-350-360	350 V	360 A	60kVA	0.01V/0.01A	＜0.1%+0.1%FS/＜0.3%+0.3%FS	USB, CAN, LAN, digital I/O, optional GPIB / analog & RS232	27 u
IT7975-350-450	350 V	450 A	75kVA	0.01V/0.01A	＜0.1%+0.1%FS/＜0.3%+0.3%FS	USB, CAN, LAN, digital I/O, optional GPIB / analog & RS232	27 u
IT7990-350-540	350 V	540 A	90kVA	0.01V/0.01A	＜0.1%+0.1%FS/＜0.3%+0.3%FS	USB, CAN, LAN, digital I/O, optional GPIB / analog & RS232	27 u
IT79105-350-630	350 V	630 A	105kVA	0.01V/0.01A	＜0.1%+0.1%FS/＜0.3%+0.3%FS	USB, CAN, LAN, digital I/O, optional GPIB / analog & RS232	27 u
IT79120-350-720	350 V	720 A	120kVA	0.01V/0.01A	＜0.1%+0.1%FS/＜0.3%+0.3%FS	USB, CAN, LAN, digital I/O, optional GPIB / analog & RS232	37 u
IT79135-350-810	350 V	810 A	135kVA	0.01V/0.01A	＜0.1%+0.1%FS/＜0.3%+0.3%FS	USB, CAN, LAN, digital I/O, optional GPIB / analog & RS232	37 u
IT79150-350-900	350 V	900 A	150kVA	0.01V/0.01A	＜0.1%+0.1%FS/＜0.3%+0.3%FS	USB, CAN, LAN, digital I/O, optional GPIB / analog & RS232	37 u
IT79165-350-990	350 V	990 A	165kVA	0.01V/0.01A	＜0.1%+0.1%FS/＜0.3%+0.3%FS	USB, CAN, LAN, digital I/O, optional GPIB / analog & RS232	37 u

Note: The above specifications are subject to change without prior notice.

¿No encuentra lo que está buscando?

Póngase en contacto con nosotros