Productos Fabricantes Servicios Soluciones Resources Promociones About Us

Presupuesto Rápido: Fujikura 90S+ (S017521)

(+34) 91 076 21 90¿Necesita ayuda? Hable con nuestros expertos.

Fujikura 90S+ (S017521)

Core Alignment Fusion Splicer

Modelo

90S+ (S017521)

Familia de productos

Network & Fiber Installations

Fabricante

Fujikura

Los modelos configurados tienen las siguientes opciones:

Network & Fiber InstallationsFusion Splicers

Configuraciones

Especificaciones clave

Vista general del producto

Recursos

Permítanos ayudarlo con su configuración exacta

Utilice "Presupuesto Rápido" y nos pondremos en contacto con usted y le cotizaremos para su necesidad exacta.

También puede ponerse en contacto, si lo prefiere, y nuestros expertos podrán orientarlo con la aplicación y la solución de adquisición adecuadas para este producto.

Vista general del producto

The Fujikura 90S+ core alignment fusion splicer solves common problems seen in the field—from splicing poor quality legacy fiber to automated equipment maintenance and upkeep. The Fujikura 90S+ can be use in multiple field splicing applications including bend-insensitive fibers in drop cables, long-haul terrestrial and submarine LEAF® fibers, loose buffer fiber, splice-on connectors, and the list goes on. The speed and accuracy of the 90S+ make it suitable for certain production and specialty environments where high output, tight packaging, and low loss requirements are required.

Key Features
Automatic Open-Close Wind Protectors	The faster automated features of the 90S+ fusion splicer reduce installation times. With this splicer, an operator can complete the entire splice process from splicing to heating without touching the 90S+ and only moving the fiber.
Operation Time Reduction	The shape of the sheath clamp is optimized for 60mm length protection sleeves. The length from splice point to the edge of the sheath clamp is 30mm. Therefore, it is easy to center the protection sleeve over the splice by using your fingers to reference the splice point.
Fiber Retention Clamp	The fiber retention clamps support the automated operations. When the sheath clamps open automatically after splicing, the fiber retention clamps gently hold the spliced fiber to keep it from flying out. The retention clamps release when the fiber is lifted by the operator.
Operation Time Reduction	These functions enable the 90S+ fusion splicer to reduce operation time by 50% over the previous model.
Carrying Case	There are multiple ways to utilize the 90S+ fusion splicer carrying case. The 90S+ fusion splicer is ready to use just by opening the case, but it is also possible to use the 90S+ fusion splicer on top of the carrying case or only with the work tray depending on the work environment.
Work Tray	The work tray has many functions. There are two drawers for storage, and the drawers are large enough to store tools or battery packs. Also, the work tray can be divided in two, so it is configurable to fit your work space.
Loose Tube Compatibility	The sheath clamp of the 90S+ fusion splicer is compatible with loose tube fiber. The Protrusion part on of the sheath clamp for loose tube fiber engages or retracts by simply changing the switch position with your finger.
Tool-Less Electrodes and Illumination	The 90S+ fusion splicer electrodes come as an “assy” including the fixing screw. You can rotate the screw by hand without tools, enabling easy electrode replacement. The transparent electrode covers support wider illumination of the v-groove. As the sheath clamp opens on the opposite side of the illumination lamp, the sheath clamp area is illuminated without shadow.

Active Fusion Control Technology
Active Fusion Control by Cleave Condition	One of main causes of high splice loss is bad cleave end face. The 90S+ fusion splicer analyzes the condition of both L and R cleave end faces and performs optimal fusion control. This new technology improves splice loss significantly and reduces the risk of re-installation.
Active Fusion Control by Fiber Brightness	Fusion is easily affected by changes in the environment. The 90S+ fusion splicer uses real-time fusion parameter control by analyzing the fiber’s brightness intensity during fusion. It contributes to stable, reduced splice loss.
Active Fusion Control by Fiber Discrimination	Adequate splice parameters may differ depending on fiber type. The 90S+ fusion splicer automatically applies the optimum splice parameters depending on the ﬁber type.

Active Blade Management Technology

Active Blade Rotation by Motor

The 90S+ fusion splicer and CT50 ﬁber cleaver are enabled with wireless data connectivity.

This capability allows automatic cleaver blade rotation when the 90S+ fusion splicer judges the blade is worn.

The 90S+ fusion splicer can connect to two CT50s simultaneously.

Active Blade Life Management

The 90S+ fusion splicer displays the remaining blade life and informs the user when a blade height change, position change, or new blade is required.

Specifications

Core Alignment Fusion splicer 90S+

Features

Parameters

Fiber Alignment Method

Active core alignment

Fiber Count can be Spliced

Single fiber

Applicable Fiber

Fiber Type

Single mode optical fiber

Multi mode optical fiber

Applicable fiber

Cladding Dia.

80 to 150μm

Applicable coating

Sheath Clamp

Coating dia. : Max. 3000μm

Cleave length : 5 to 16mm *1

Fiber splice performance

Splice Loss *2

ITU-T G.652 : Avg. 0.02dB

ITU-T G.651 : Avg. 0.01dB

ITU-T G.653 : Avg. 0.04dB

ITU-T G.654 : Avg. 0.04dB

ITU-T G.655 : Avg. 0.04dB

ITU-T G.657 : Avg. 0.02dB

Fiber Splice Performance

Splice Time *3

SM FAST mode : Avg. 7 to 9sec.

AUTO mode : Avg. 14 to 16sec.

Applicable Protection Sleeve

Sleeve Type

Sleeve Length

Sleeve Dia.

Heat shrinkable sleeve

Max. 66mm

Max. 6.0mm before shrinking

Sleeve Heat Performance

Heat Time *4

60mm slim mode : Avg. 9 to 10sec.

60mm mode : Avg. 13 to 15sec.

Fiber Tensile Test Force

Approx. 2.0N

Electrode Life *5

Approx. 5000 splices

Physical description

Dimensions W

Dimensions D

Dimensions H

Weight

Approx.170mm without projection

Approx.173mm without projection

Approx.150mm without projection

Approx. 2.8kg including battery

Environmental Condition

Temperature

Operate : -10 to 50 degreeC

Storage : -40 to 80 degreeC

Environmental Condition

Humidity

Operate : 0 to 95%RH non-condensing

Storage : 0 to 95%RH non-condensing

Environmental Condition

Altitude

Max. 5000m

AC Adaptor

Input

AC100 to 240V, 50/60Hz, Max. 1.5A

Battery Pack

Type

Output

Capacity *6

Battery Life *7

Rechargeable Lithium Ion

Approx. DC14.4V, 6380mAh

Approx. 300 splice and heat cycles

Approx. 500 recharge cycles

Battery Pack Temperature

Recharge:

Storage:

0 to 40 degreeC

-20 to 30 degreeC

Display

LCD Monitor

Magnification

TFT 4.9 inches with touch screen

200 to 320x

Illumination

V-Grooves

LED lamp

Interface

External LED Lamp

Ribbon Stripper

Wireless *8

USB2.0 Mini B type

USB2.0 A type Approx. DC5V, 500mA

Mini DIN 6pin DC12V, Max. 1A

Bluetooth 4.1 LE

Data Storage

Splice Mode

Heat Mode

Splice Result

Splice Image

100 splice modes

30 heat modes

20000 splices

100 images

Screw Hole for Tripod

1/4-20UNC

Notes:

*1 Cleave length range depending on fiber type

5 to 16mm: 125μm cladding dia. and 250μm coating dia.

10 to 16mm: 125μm cladding dia. and 400 or 900μm coating dia.

5 to 10mm: 80μm cladding dia. and 160μm coating dia.

5 to 16mm: 150μm cladding dia. and 250μm coating dia.

*2 Measured with a cut-back method relevant to ITU-T and IEC standard after splicing Fujikura identical fibers.

The average splice loss changes depending on the environmental condition and fiber characteristics.

*3 Measured at room temperature.

The definition of splice time is from the fiber image appearing on LCD monitor to the estimated loss displayed.

The average splice time changes depending on the environmental conditions, fiber type, and fiber characteristics

*4 Measured at room temperature with the AC adapter.

The heat time is defined from the start beep sound to the finish beep sound.

The average heat time changes depending on the environmental conditions, sleeve type and battery pack condition.

*5 The electrode life changes depending on the environmental conditions, fiber type and splice modes

*6 Test condition

(1) Splice and heat time : 1 minute cycle

(2) Using the splicer power save settings

(3) Using a not degraded battery

(4) At room temperature

The battery capacity changes when testing with different conditions from the above

*7 The battery capacity decreases to a half after approx. 500 discharge and recharge cycles.

The battery life is shortened further when using outside of the storage temperature range, operating temperature range, if completely discharged by storing for a long time without recharging.

*8 Bluetooth® mark and logos are the registered trademarks of Bluetooth SIG, Inc.