Productos Fabricantes Servicios Soluciones Resources Promociones About Us

Presupuesto Rápido: Omicron Franeo 800 (VE000661)

(+34) 91 076 21 90¿Necesita ayuda? Hable con nuestros expertos.

Omicron Franeo 800 (VE000661)

Sweep Frequency Response Analyzer; 1 Hz to 30 MHz

Modelo

Franeo 800 (VE000661)

Familia de productos

Electrical & Power Quality

Fabricante

Omicron

Los modelos configurados tienen las siguientes opciones:

Electrical & Power QualityTransformer and Motor Testing

Configuraciones

Especificaciones clave

Vista general del producto

Recursos

Permítanos ayudarlo con su configuración exacta

Utilice "Presupuesto Rápido" y nos pondremos en contacto con usted y le cotizaremos para su necesidad exacta.

También puede ponerse en contacto, si lo prefiere, y nuestros expertos podrán orientarlo con la aplicación y la solución de adquisición adecuadas para este producto.

Vista general del producto

FRANEO 800 was developed for testing the mechanical and electrical integrity of power transformers after transportation or exposure to high fault currents. It uses the sweep frequency response analysis (SFRA) principle and measures the electrical transfer function over a wide range of frequencies. With our FRANEO 800 you can improve your transformer reliability, reduce maintenance costs and prevent expensive failures.

Key Features

Extremely small and compact device guarantees optimum usability

Innovative connection technique ensures high level of reproducibility

Short measurement times due to the intelligent sweep algorithm

Highest dynamic range in SFRA testing industry (> 150 dB)

Fully compliant with the IEC 60076-18 and IEEE C57.149 standards

Applications

FRANEO 800 can be used for transformer testing, after;

a short-circuit event

before and after transport

an occurrence of high transient fault currents

a significant change in the monitored values (for example, combustible gases) or a safety shutdown

The following tests can also be performed;

Routine transformer condition measurement

Verification of unusual events determined during conventional testing

Benefits
Reliable Execution	The integrated "Ground Loop Check" verifies the test setup and makes sure that the grounding braids are properly connected. It gives you a "pass/Fail" assessment and either allows or prevents you from continuing with your measurement.
Battery Operated Device	Withe the powerful integrated battery, you can also perform tests in environments without a power supply. This makes FRANEO 800 ideal for commissioning and trouble shooting tasks.
Widest Dynamic Range	FRANEO 800 provides the widest dynamic range in the SFRA industry (> 150 dB). In combination with the variable output voltage (0.1 Vpp to 10 Vpp) the signal to noise ratio can be enhanced, and the influence of interference reduced.
Short Measurement Times	The implemented algorithms enable more precise measurement results in less time by firstly performing a broadband measurement and then focusing on the critical frequency areas.

Specifications
FRANEO 800 Sweep Frequency Response Analyzer
Feature	Parameter
Frequency Range	1 Hz ... 30 MHz
Output Impedance (for f = 20 Hz...2 MHz)	50 Ω (± 2%)
Connector	BNC
Amplitude	10 Vpp (at 50 Ω)
Dynamic Range (for f = 20 Hz...2 MHz)	> 150 dB (+10 dB ... < -140 dB noise floorrms)
Attentuation/Accuracy (for f = 20 Hz...2 MHz)	Typical Accuracy: ± 0.1 dB (down to -50 dB) ±0.3 dB (between -50 dB and -100 dB) Guaranteed Accuracy: ± 0.3 dB (down to -50 dB) ±0.5 dB (between -50 dB and -100 dB)
Dimensions (w x h x d)	252 x 53 x 265 mm 10 x 2 x 10.4 in
Weight	1.8 kg 4 lbs (without measuring cables)
Operating Temperature	-10 °C ... + 55 °C + 14 °F ... + 131 °F
Storage Temperature	-35 °C ... + 55 °C + 31 °F ... + 131 °F
Relative Humidity	20% ... 95%, non-condensing

Specifications
FRANEO 800 Sweep Frequency Response Analyze
Model Package Overview
Model (Order Number)	Description
FRANEO 800 Standard Package (P0005860)	Package for performing sweep frequency response analysis (SFRA) on power transfromers, featuring the FRANEO 800 device, dedicated bushing and flange clamps, the aluminium braids as well as the Primary Test ManagerTM (PTM) software for easy operation.
FRANEO 800 Quick Connection Package (P0005861)	Package for performing sweep frequency response analysis (SFRA) on power transformers, featuring the FRANEO 800 device, all-in-one cables (incl. ring reference ground connection and easy-to-connect clamps) as well as the Primary Test Manager (PTM) software for easy operation.
Accessories and Upgrades
Clamp Set for Short Bushings (P0006313)	2 x Short aluminum braids (1.5 m / 5 ft) 2 x Clamps in a carry bag
Quick Connection Upgrade Option (P0006324)	1 × Transport bag 2 × All-in-one cables with ring reference ground connection and easy-to-connect clamps 2 × Grounding leads (1 m / 3 ft) 2 × Grounding leads (2 m / 7 ft)

¿No encuentra lo que está buscando?

Póngase en contacto con nosotros