Konfigurierte Modelle enthalten die folgenden Merkmale:
RF & Microwave Spectrum AnalyzersSpectrum Analyzers-Performance20GHz <= 50GHzDC <= 1kHzBenchtopOptions-ID | Beschreibung |
---|---|
R&S®Accredited Calibration for FSVA3044: - Accredited calibration certificate - ISO 17025 accredited and ISO 9001 certified, traceability to national/international standards - Measurement of complete product specifications with the same procedures as used in production, incl. measurement uncertainties/guardbanding - Documentation of calibration results upon receipt | |
Documentation of calibration values | |
Printout of DCV (additional, in combination with DCV-Option only) | |
Smart noise source 100 MHz to 40 GHz | |
Carrying handles at instrument sides (retrofittable by customer) | |
AM/FM demodulation audio output including speaker, plug for headphones and volume knob (retrofit in service, excludes FSV3-B21) | |
OCXO, precision frequency reference, aging per year: 0.1 ppm, temp. drift: 0.1 ppm (5 to 45°C) (retrofit in service) | |
Additional interfaces IF/Video out, trigger out, user port, GPIB, AUX-control for TTL-sync. with FSV3-B10 option (retrofit in service) | |
10 Gigabit Ethernet port at instrument back for instrument control (retrofit in service) | |
Control of external signal generators via LAN for use as tracking generator. D-Sub cable for TTL-synchronization not included. (software license) | |
Microwave preselector bypass for wide analysis bandwidths at center frequency > 7.5 GHz (software license) | |
Spare solid state drive (requires option FSV3-B20) | |
Removable hard drive at the instrument front panel. Includes SSD (1 pc). (retrofit in service) | |
RF Preamplifier, 30 dB 10 MHz to 43.5 GHz (retrofit in service) | |
Electronic attenuator, 0-25 dB in 1 dB steps, max. frequency 7.5 GHz (software license) | |
28V BNC connector for noise source control via instrument firmware (retrofittable in service) | |
USB mass memory write protection disables writing to USB nemory sticks (installation ex factory) (software license) | |
Extension to 40 MHz signal analysis bandwidth (software license) | |
CPU board with enhanced computing power and memory size for fast analysis of complex digital modulation schemes (retrofit in service) | |
CPU board with enhanced computing power and memory size for fast analysis of complex digital modulation schemes for the FSVA3000. (ex factory only) | |
200 MHz signal analysis bandwidth extension (retrofittable in service) | |
Analog base band inputs, analysis bandwidth I only, Q only 200 MHz, I + jQ 400 MHz Supports IQ Analyzer and FSV3-K91 (WLAN) (FSV3-B200, B400, B600 or B1000 required) (retrofit in service) | |
400 MHz signal analysis bandwidth extension (retrofittable in service) | |
Pulse measurement application (software license) | |
Modulation Analysis Application for Analog (AM, FM, PM) Modulated Single Carrier Signals (software license) | |
Measurements with NRP Power Sensors (software license) | |
GSM measurement application GSM, EDGE, EDGE Evolution and VAMOS (software license) | |
Power Amplifier and Envelope Tracking Measurement Application (software license) | |
Direct DPD Measurement Application (R&S®FSV3-K18 Required) (software license) | |
Frequency response measurement application Requires R&S®FSV3-K18 (software license) | |
Noise Figure and Gain Measurement Application (Noise Source Required, Preamplifier R&S®FSV3-B24 recommended, option R&S®FSV3-B28V required for noise sources with BNC power connector) (software license) | |
Security Write Protection for Internal Solid State Drive (software license) | |
Phase Noise Measurement Application (software license) | |
Vector Signal Analysis Application for Modulation Analysis on Digital Modulated Single Carrier Signals (software license) | |
Vector Signal Analysis Application for Modulation Analysis of Signals with Multiple Modulations (R&S®FSV3-K70 Required) (software license) | |
BER Measurement Application with PRBS Data (R&S®FSV3-K70 Required) (software license) | |
3GPP FDD (WCDMA) BS Measurement Application, Incl. HSDPA and HSDPA+ (software license) | |
3GPP FDD (WCDMA) MS Measurement Application, Incl. HSUPA and HSUPA+ (software license) | |
WLAN 802.11a/b/g Measurement Application (software license) | |
WLAN 802.11ac Measurement Application (R&S®FSV3-K91 Required) (software license) | |
WLAN 802.11ax Measurement Application (R&S®FSV3-K91 Required) (software license) | |
WLAN 802.11n Measurement Application (R&S®FSV3-K91 Required) (software license) | |
WLAN 802.11p Measurement Application (R&S®FSV3-K91 Required) (software license) | |
EUTRA/LTE FDD Downlink Measurement Application (software license) | |
EUTRA/LTE FDD Uplink Measurement Application (software license) | |
EUTRA/LTE Advanced Downlink Measurement Application (FSV3-K100 or -K104 Required) (software license) | |
EUTRA/LTE Advanced Uplink Measurement Application (FSV3-K100 or -K104 Required) (software license) | |
EUTRA/LTE TDD Downlink Measurement Application (software license) | |
EUTRA/LTE TDD Uplink Measurement Application (software license) | |
EUTRA/LTE NB-IoT Downlink Measurement Application (software license) | |
3GPP 5G-NR Downlink Measurement Application (software license) | |
3GPP 5G-NR Uplink Measurement Application (software license) | |
3GPP 5G-NR combined DL ACLR/SEM/EVM measurements (FSV3-K144 option required) | |
5G NR R16 Extension for UL/DL (FSV3-K144 or FSV3-K145 option required) | |
User Defined Frequency Response Correction by SnP File in Touch Stone File Format. Corrects Frequency Response (Amplitude and Phase) of Measurement Setup. (software license) | |
Activates input up to 1280 MHz and output 640 MHz of frequency reference ports. For coupling of references of signal generator or DUT. (License Key) | |
Upgrade from 200 MHz to 400 MHz analysis bandwidth for FSVA3000 (software license) | |
Extension of the 3 year standard product warranty to 4 years for FSVA3044: - All repairs and all necessary R&S®Manufacturer-Calibrations in case of repair | |
Extension of the 3 year standard product warranty to 5 years for FSVA3044: - All repairs and all necessary R&S®Manufacturer-Calibrations in case of repair | |
19" adapter BW2010, cabinet 4HU 1/1 |
Anzeigen 1 - 6 von 12 Ergebnissen
Produkt-ID: P-162495
Bestätigung bei Angebotserstellung
Angebot
Fragen Sie jetzt um mehr Informationen zu erhalten
Produkt-ID: P-182570
Bestätigung bei Angebotserstellung
Angebot
Fragen Sie jetzt um mehr Informationen zu erhalten
Produkt-ID: P-653249
Bestätigung bei Angebotserstellung
Angebot
Fragen Sie jetzt um mehr Informationen zu erhalten
Produkt-ID: P-379631
Bestätigung bei Angebotserstellung
Angebot
Fragen Sie jetzt um mehr Informationen zu erhalten
Produkt-ID: P-375079
Bestätigung bei Angebotserstellung
Angebot
Fragen Sie jetzt um mehr Informationen zu erhalten
Produkt-ID: P-277436
Bestätigung bei Angebotserstellung
Angebot
Fragen Sie jetzt um mehr Informationen zu erhalten
Anzeigen 1 - 6 von 12 Ergebnissen