Specifications |
|
|
N9042B UXA X-Series Signal Analyzer |
|
|
Model Overview |
|
|
Model / Option Number | Description | Additional Information |
Frequency Range |
|
|
N9042B-526 | Frequency range, 2 Hz to 26.5 GHz | - |
N9042B-544 | Frequency range, 2 Hz to 44 GHz | - |
N9042B-550 | Frequency range, 2 Hz to 50 GHz | - |
Analysis Bandwidth |
|
|
N9042B-R10 | Analysis Bandwidth, 1 GHz | - |
N9042B-R15 | Analysis Bandwidth, 1.5 GHz | - |
N9042B-R20 | Analysis Bandwidth, 2 GHz | - |
N9042B-R40 | Analysis Bandwidth, 4 GHz | - |
| Analysis Bandwidth, 11 GHz | See N9042B-CRW in Select Connection Options |
Attenuator |
|
|
Standard | Mechanical attenuator | 2 dB steps, 0 to 70 dB; licensed as N9042B-FSA |
N9040B-EA3 | Electronic attenuator up to 3.6 GHz | Add in addition to the mechanical attenuator; 1 dB steps, 0 to 24 dB |
Performance Options |
|
|
Standard | Digital processor with 4 GB capture memory | Licensed as N9042B-DP4 |
Standard | Enhanced phase noise performance | DDS-based LO assembly; licensed as N9042B-EP0 |
Standard | External mixing | Provides external mixing with Keysight and third-party mixers; single port 1 for LO out and IF in (SMA female); licensed as N9042B-EXM |
Standard | Fast sweep capability | Improves sweep speed at swept mode; licensed as N9042B-FS1 and FS2 |
Standard | LO/IM nulling | Minimizes the LO feed-thru and the intermodulation distortion; licensed as N9042B-NUL |
Standard | Low noise path | Improves sensitivity (DANL) in frequency bands above 3.6 GHz without degrading dynamic range; licensed as N9042B-LNP |
Standard | Microwave preselector bypass | Bypass the microwave preselector for wider bandwidth IF; licensed as N9042B-MPB |
Standard | Full bypass path | Bypass the microwave preselector and enable the low noise path for improved sensitivity above 3.6 GHz; standard in instruments when Option R10, R15, R20 or R40 is installed; licensed as N9042B-FBP |
Standard | Precision frequency reference | Aging rate: ± 1 x 10-7/year; licensed as N9042B-PFR |
Standard | Noise floor extension | Improves analyzer’s DANL performance; licensed as N9042B-NF2 |
Standard | Enhanced display package | Includes spectrogram, trace zoom, and zone span in SA mode; licensed as N90E1EDPB |
Standard | Fast power, up to maximum available analysis bandwidth | Accelerate power measurements such as ACPR; licensed as N90E1FP2B |
Preamplifier |
|
|
N9042B-P26 | Preamplifier, 26.5 GHz | Compatible with N9042B-526 only |
N9042B-P44 | Preamplifier, 44 GHz | Compatible with N9042B-544 only |
N9042B-P4L | Preamplifier, 44 GHz, basic | Compatible with N9042B-544 only; non-IVL, no export control |
N9042B-P50 | Preamplifier, 50 GHz | Compatible with N9042B-550 only |
N9042B-P5L | Preamplifier, 50 GHz, basic | Compatible with N9042B-550 only: non-IVL, no export control |
Standard | Low noise amplifier | Licensed as N9042B-LNA |
PC Security |
|
|
N9042B-SF1 | Security features, exclude launching programs | Prevents the launching of Windows programs from the instrument application |
N9042B-SF2 | Security features, prohibit saving results | Prevents instrument application from saving/recall of measurement results or user configurations to/from instrument’s data storage |
N9042B-SS1 | Additional removable solidstate drive, Win10 | Provides a fully-imaged, removable SSD in addition to the one installed in instruments, with Windows 10 operating system |
Source Connectivity |
|
|
N9042B-ESC | External source control | External source control for selected Keysight EXG, MXG, and PSG signal generators; supports external mixing; includes 3 BNC cables and 1 cross-over LAN cable |
Connection Options |
|
|
N9042B-ALV | Auxiliary log video output | Fast rise time video out; output on Aux IF connector |
N9042B-YAV | Y-axis video output | Screen video (0-1 volt open circuit); log video and linear video |
N9042B-CRP | Connector rear, programmable IF output | IF out 10 to 75 MHz (in 500 kHz steps); output on Aux IF connector at rear panel |
N9042B-CRW | Connector, IF out, wide | Enables front panel Wide IF Out connector that provides 11 GHz BW IF signal from the internal wideband signal paths. Is required for N9042BEDC, External Digitizer Control |