You are browsing the DE site. Would you like to be redirected to another country or region to see content and products specific to your location?

Schnelles Angebot: Rohde & Schwarz FSWP26 (1322.8003.26)

Rohde & Schwarz FSWP26 (1322.8003.26)

Phase Noise Analyzer; 1 MHz to 26.5 GHz
Modell
FSWP26 (1322.8003.26)
Produktfamilie
RF & Microwave Power
Hersteller
Rohde & Schwarz

Konfigurierte Modelle enthalten die folgenden Merkmale:

RF & Microwave PowerNoise & OtherNoise Test Sets
Konfigurationen
Wichtigste Daten
Produktübersicht
Ressourcen

Wählen Sie Ihre Konfiguration

Show:

Verfügbare Optionen für Rohde & Schwarz FSWP26 (1322.8003.26)

Options-IDBeschreibung
Signal and spectrum analyzer 10 Hz to 26 GHz for R&S®FSWP26 (hardware option, retrofittable in factory)
High stability OCXO
Resolution BW >10MHz
Resolution bandwidth up to 80 MHz, 20 MHz and 50 MHz additionally, for R&S FSWP8 and R&S FSWP26, option R&S FSWP-B1 required (hardware option)
External generator control Retrofittable in Rohde&Schwarz service (hardware option)
High pass filter improved dynamic range for measurement of harmonics, suppression of fundamental signals from 300 MHz to 1.8 GHz, option R&S®FSWP-B1 required (software license)
Solid state drive, 64 GB with analyzer firmware for exchange against standard SSD for instruments with IPC11 CPU board (hardware option)
Support for harmonic mixers, includes LO/IF ports for external mixers for R&S®FSWP for x-corr option FSWP-B64 required (hardware option)
RF Preamplifier, 20 dB 100 kHz to 26 GHz for R&S®FSWP26 option R&S®FSWP-B1 required (hardware option)
Cross correlation
Cross correlation for phase noise analyzer R&S FSWP26 from 1 MHz to 26 GHz (hardware option)
Cross correlation for phase noise analyzer R&S®FSWP26 from 1MHz to 26GHz Low phase noise, includes R&S®FSWP-B4, excludes option R&S®FSWP-B60 (hardware option)
Signal source for additiv
Signal source for additive phase noise measurement, model dependent 10 MHz to max. 18 GHz, 0.1 dB steps
Extension to 80 MHz signal analysis bandwidth, includes microwave preselector bypass option R&S®FSWP-B1 required (software license)
Extension to 320 MHz signal analysis bandwidth (retrofit in service) (hardware option)
All software options active
Measurement application for pulsed phase noise and additive pulsed phase noise (software license)
Pulse measurement application R&S®FSWP-B1 required (software license)
Pulse stability measureme
Time Sidelobe Measurment
Modulation analysis application for modulation analysis of analog (AM, FM, PM) modulated single carrier signals, R&S®FSWP-B1 required (software license)
Noise figure measurement application noise source required, R&S®FSWP-B1 required Preamplifier R&S®FSWP-B24 recommended (software license)
Security Write Protection
Measurement application for detection and display of low level spurious signals (software license)
Transient measurement application (software license)
Chirp analysis extension
Hopping analsis extension
Vector signal analysis for modulation analysis on digital modulated single carrier signals R&S®FSWP-B1 required (software license)
Upgrade of internal signal source for additive phase noise meas.
Windows 10

Anzeigen 1 - 6 von 34 Ergebnissen

1
2
6
1

Phase noise analyzer and VCO tester 1 MHz to 26.5 GHz optionally with cross correlation and spectrum

Produkt-ID: P-605572

FSWP-B24 (1325.3725.26) • RF Preamplifier, 20 dB 100 kHz to 26 GHz for R&S®FSWP26 option R&S®FSWP-B1 required (hardware option)FSWP-B60 (1322.9800.26) • Cross correlation for phase noise analyzer R&S FSWP26 from 1 MHz to 26 GHz (hardware option)FSWP-B1 (1322.9997.26) • Signal and spectrum analyzer 10 Hz to 26 GHz for R&S®FSWP26 (hardware option, retrofittable in factory)FSWP-B4 (1325.3890.02) • High stability OCXOFSWP-B8 (1325.5028.26) • Resolution bandwidth up to 80 MHz, 20 MHz and 50 MHz additionally, for R&S FSWP8 and R&S FSWP26, option R&S FSWP-B1 required (hardware option)FSWP-B64 (1322.9900.27) • Signal source for additive phase noise measurement, model dependent 10 MHz to max. 18 GHz, 0.1 dB steps
Mieten

Bestätigung bei Angebotserstellung

Angebot

Gebraucht

Verfügbarkeit bei Angebotserstellung bestätigt

Anfrage

Finanzlösungen

Fragen Sie jetzt um mehr Informationen zu erhalten

2

Phase noise analyzer and VCO tester 1 MHz to 26.5 GHz optionally with cross correlation and spectrum

Produkt-ID: P-605556

FSWP-B61 (1325.3719.26) • Cross correlation for phase noise analyzer R&S®FSWP26 from 1MHz to 26GHz Low phase noise, includes R&S®FSWP-B4, excludes option R&S®FSWP-B60 (hardware option)FSWP-B64 (1322.9900.27) • Signal source for additive phase noise measurement, model dependent 10 MHz to max. 18 GHz, 0.1 dB stepsFSWP-B24 (1325.3725.26) • RF Preamplifier, 20 dB 100 kHz to 26 GHz for R&S®FSWP26 option R&S®FSWP-B1 required (hardware option)FSWP-B1 (1322.9997.26) • Signal and spectrum analyzer 10 Hz to 26 GHz for R&S®FSWP26 (hardware option, retrofittable in factory)FSWP-B8 (1325.5028.26) • Resolution bandwidth up to 80 MHz, 20 MHz and 50 MHz additionally, for R&S FSWP8 and R&S FSWP26, option R&S FSWP-B1 required (hardware option)
Mieten

Bestätigung bei Angebotserstellung

Angebot

Gebraucht

Verfügbarkeit bei Angebotserstellung bestätigt

Anfrage

Finanzlösungen

Fragen Sie jetzt um mehr Informationen zu erhalten

3

Phase noise analyzer and VCO tester 1 MHz to 26.5 GHz optionally with cross correlation and spectrum

Produkt-ID: P-605601

FSWP-B60 (1322.9800.08) • Cross correlationFSWP-B4 (1325.3890.02) • High stability OCXOFSWP-B1 (1322.9997.26) • Signal and spectrum analyzer 10 Hz to 26 GHz for R&S®FSWP26 (hardware option, retrofittable in factory)FSWP-K4 (1325.5034.02) • Measurement application for pulsed phase noise and additive pulsed phase noise (software license)FSWP-B64 (1322.9900.27) • Signal source for additive phase noise measurement, model dependent 10 MHz to max. 18 GHz, 0.1 dB steps
Mieten

Bestätigung bei Angebotserstellung

Angebot

Gebraucht

Verfügbarkeit bei Angebotserstellung bestätigt

Anfrage

Finanzlösungen

Fragen Sie jetzt um mehr Informationen zu erhalten

4

Phase noise analyzer and VCO tester 1 MHz to 26.5 GHz optionally with cross correlation and spectrum

Produkt-ID: P-607787

FSWP-B24 (1325.3725.26) • RF Preamplifier, 20 dB 100 kHz to 26 GHz for R&S®FSWP26 option R&S®FSWP-B1 required (hardware option)FSWP-B1 (1322.9997.26) • Signal and spectrum analyzer 10 Hz to 26 GHz for R&S®FSWP26 (hardware option, retrofittable in factory)FSWP-B61 (1325.3719.26) • Cross correlation for phase noise analyzer R&S®FSWP26 from 1MHz to 26GHz Low phase noise, includes R&S®FSWP-B4, excludes option R&S®FSWP-B60 (hardware option)FSWP-B18 (1331.4313.02) • Solid state drive, 64 GB with analyzer firmware for exchange against standard SSD for instruments with IPC11 CPU board (hardware option)FSWP-K70 (1325.4280.02) • Vector signal analysis for modulation analysis on digital modulated single carrier signals R&S®FSWP-B1 required (software license)FSWP-K4 (1325.5034.02) • Measurement application for pulsed phase noise and additive pulsed phase noise (software license)
Mieten

Bestätigung bei Angebotserstellung

Angebot

Gebraucht

Verfügbarkeit bei Angebotserstellung bestätigt

Anfrage

Finanzlösungen

Fragen Sie jetzt um mehr Informationen zu erhalten

5

Phase noise analyzer and VCO tester 1 MHz to 26.5 GHz optionally with cross correlation and spectrum

Produkt-ID: P-245911

FSWP-K60C (1338.4531.02) • Chirp analysis extensionFSWP-K6P (1338.3106.02) • Pulse stability measuremeFSWP-K30 (1325.4244.02) • Noise figure measurement application noise source required, R&S®FSWP-B1 required Preamplifier R&S®FSWP-B24 recommended (software license)FSWP-K33 (1325.5040.02) • Security Write ProtectionFSWP-B18 (1331.4313.02) • Solid state drive, 64 GB with analyzer firmware for exchange against standard SSD for instruments with IPC11 CPU board (hardware option)FSWP-B13 (1325.4350.02) • High pass filter improved dynamic range for measurement of harmonics, suppression of fundamental signals from 300 MHz to 1.8 GHz, option R&S®FSWP-B1 required (software license)
Mieten

Bestätigung bei Angebotserstellung

Angebot

Gebraucht

Verfügbarkeit bei Angebotserstellung bestätigt

Anfrage

Finanzlösungen

Fragen Sie jetzt um mehr Informationen zu erhalten

6

Phase noise analyzer and VCO tester 1 MHz to 26.5 GHz optionally with cross correlation and spectrum

Produkt-ID: P-366356

FSWP-B1 (1322.9997.26) • Signal and spectrum analyzer 10 Hz to 26 GHz for R&S®FSWP26 (hardware option, retrofittable in factory)FSWP-B24 (1325.3725.26) • RF Preamplifier, 20 dB 100 kHz to 26 GHz for R&S®FSWP26 option R&S®FSWP-B1 required (hardware option)FSWP-B4 (1325.3890.02) • High stability OCXOFSWP-B60 (1322.9800.26) • Cross correlation for phase noise analyzer R&S FSWP26 from 1 MHz to 26 GHz (hardware option)FSWP-B8 (1325.5028.26) • Resolution bandwidth up to 80 MHz, 20 MHz and 50 MHz additionally, for R&S FSWP8 and R&S FSWP26, option R&S FSWP-B1 required (hardware option)FSWP-B64 (1322.9900.27) • Signal source for additive phase noise measurement, model dependent 10 MHz to max. 18 GHz, 0.1 dB steps
Mieten

Bestätigung bei Angebotserstellung

Angebot

Gebraucht

Verfügbarkeit bei Angebotserstellung bestätigt

Anfrage

Finanzlösungen

Fragen Sie jetzt um mehr Informationen zu erhalten

Anzeigen 1 - 6 von 34 Ergebnissen

1
2
6
* Preise und Verfügbarkeit können ohne vorherige Ankündigung geändert werden. Alle Preise können aufgrund von Versandbedingungen, Mehrwertsteuer oder Umsatzsteuer, Einfuhrzöllen und Wechselkursen variieren. Produkte sind möglicherweise nicht an allen Standorten verfügbar. Alle aufgeführten Einsparungen basieren auf dem vollständigen Listenpreis neuer Instrumente. Die tatsächlichen Einsparungen können je nach Option (en), Konfiguration, Wechselkursen und anderen Faktoren variieren. Die Garantie kann je nach Kategorie oder verfügbarem Produkt variieren. Alle Bedingungen müssen durch ein vollständiges schriftliches Angebot bestätigt werden.

Nicht fündig geworden?

Nehmen Sie Kontakt auf
Nicht fündig geworden?
loader
loader logo