Produkte Hersteller Services Lösungen Resources Werbeaktionen About Us

Schnelles Angebot: Rohde & Schwarz ZNA43 (1332.4500.44)

+49 6151 360 41-0Sie brauchen Hilfe? Sprechen Sie mit unseren Experten.

Rohde & Schwarz ZNA43 (1332.4500.44)

Vector Network Analyzer; 4 Port, 2.92 mm Connectors, 10 MHz to 43.5 GHz

Modell

ZNA43 (1332.4500.44)

Produktfamilie

RF & Microwave Network Analyzers

Hersteller

Rohde & Schwarz

Konfigurierte Modelle enthalten die folgenden Merkmale:

RF & Microwave Network AnalyzersNetwork Analyzers >=20GHz20GHz <= 50GHz1MHz <= 10MHz2.92mm-Male (Jack)Benchtop

Konfigurationen

Wichtigste Daten

Produktübersicht

Ressourcen

Wählen Sie Ihre Konfiguration

Show:

Optionen suchen & kombinieren, z. B. 'C4000; M400'

Verfügbare Optionen für Rohde & Schwarz ZNA43 (1332.4500.44)

Options-ID	Beschreibung
ZNA-B4 (1332.4530.02)	Precision frequency reference for R&S®ZNA (Hardware option)
ZNA-B5 (1332.4675.02)	2nd internal LO source, for R&S®ZNA (4 ports) external access up to 26.5 GHz requires option R&S®ZNA-B8 in addition (Hardware option)
ZNA-B7 (1332.4546.02)	Memory extension for long time data recording, data streaming, extended pulse pattern recording for R&S®ZNA (Hardware option)
ZNA-B8 (1332.4652.02)	mmWave converter LO, 10 MHz to 26.5 GHz, for R&S®ZNA Enables mmWave converter setups utilizing a R&S®ZNA, or general external (IF) mixing. (used for mmWave-converter setups: Requires one of options R&S®ZNA-B26, "Direct IF access", or R&S®ZNA-B5, "2nd internal LO src". Used as general mixer LO: Requires R&S®ZNA-B5, "2nd internal LO src") (Hardware option)
ZNA-B26 (1332.4598.02)	Direct IF access for R&S®ZNA (Hardware option)
ZNA-B91 (1332.4800.02)	Additonal trigger and control I/O ports for R&S®ZNA 3 trigger in, 4 trigger out, 4 pulse modulator control ports (I/O switchable), busy and ready for trigger indication, noise source control (28 V), RF OFF control input (Hardware option)
ZNA-K1 (1332.5320.02)	Spectrum analyzer mode for R&S®ZNA (software license)
ZNA-K2 (1332.5336.02)	Time domain analysis (TDR) for R&S®ZNA (software license)
ZNA-K4 (1332.5342.02)	Scalar mixer measurements and arbitrary frequency-converting measurements for R&S®ZNA (software license)
ZNA-K5 (1332.5359.02)	Vector corrected converter measurements (without reference mixer and phase reference) for R&S®ZNA requires R&S®ZNA-K4 (software license)
ZNA-K7 (1332.5371.02)	Measurements on pulsed signals (Pulse configuration, pulse profile and pulse train measurements) for R&S®ZNA requires R&S®ZNA-K17 (software license)
ZNA-K9 (1332.5394.02)	Group delay measurements on frequency converters without LO access for R&S®ZNA (4 ports recommended) requires R&S®ZNAxx-B16/R&S®ZNA-K4 (software license)
ZNA-K17 (1332.5459.02)	Increased IF bandwidth up to 30 MHz for R&S®ZNA (software license)
ZNA-K19 (1332.5513.02)	1 mHz frequency resolution for R&S®ZNA (software license)
ZNA-K20 (1332.4746.02)	Extended time domain analysis incl. eye diagram for R&S®ZNA requires R&S®ZNA-K2 (software license)
ZNA43-B3 (1332.4617.02)	3rd and 4th internal source for R&S®ZNA43 (4 ports) (Hardware option)
ZNA43-B16 (1332.4581.44)	Direct source and receiver access for R&S®ZNA43 (4 ports) Installation ex factory only (Hardware option)
ZNA43-B21 (1332.4646.21)	Source step attenuator for port 1, mechanical, 70 dB in 10 dB steps for R&S®ZNA43 Installation ex factory only (Hardware option)
ZNA43-B22 (1332.4646.22)	Source step attenuator for port 2, mechanical, 70 dB in 10 dB steps for R&S®ZNA43 Installation ex factory only (Hardware option)
ZNA43-B23 (1332.4646.23)	Source step attenuator for port 3, mechanical, 70 dB in 10 dB steps for R&S®ZNA43 Installation ex factory only (Hardware option)
ZNA43-B24 (1332.4646.24)	Source step attenuator for port 4, mechanical, 70 dB in 10 dB steps for R&S®ZNA43 Installation ex factory only (Hardware option)
ZNA43-B31 (1332.4717.31)	Receiver step attenuator for port 1, mechanical, 35 dB in 5 dB steps for R&S®ZNA43 Installation ex factory only (Hardware option)
ZNA43-B32 (1332.4717.32)	Receiver step attenuator for port 2, mechanical, 35 dB in 5 dB steps for R&S®ZNA43 Installation ex factory only (Hardware option)
ZNA43-B33 (1332.4717.33)	Receiver step attenuator for port 3, mechanical, 35 dB in 5 dB steps for R&S®ZNA43 Installation ex factory only (Hardware option)
ZNA43-B34 (1332.4717.34)	Receiver step attenuator for port 4, mechanical, 35 dB in 5 dB steps for R&S®ZNA43 Installation ex factory only (Hardware option)
ZNA43-B41 (1332.4781.41)	Internal pulse modulator for port 1 for R&S®ZNA43 (Hardware option)
ZNA43-B42 (1332.4781.42)	Internal pulse modulator for port 2 for R&S®ZNA43 (Hardware option)
ZNA43-B43 (1332.4781.43)	Internal pulse modulator for port 3 for R&S®ZNA43 (Hardware option)
ZNA43-B44 (1332.4781.44)	Internal pulse modulator for port 3 for R&S®ZNA43 (Hardware option)
ZNA43-B163 (1332.4830.53)	Direct source monitor access on port 1 and port 3 before the source step attenuator for R&S®ZNA43 (4 ports) requires R&S®ZNA43-B16/-B21/-B23 Upgrade / retrofit by R&S service Memmingen only. (Hardware option)
ZNA43-B213 (1332.4869.13)	Internal combiner, port 1
ZNA43-B302 (1332.4769.22)	Low noise pre-amplifier at receiver port 2, up to 43.5 GHz for R&S®ZNA43. (requires R&S®ZNA43-B16, R&S®ZNA43-B32)
ZNA43-B501 (1332.5236.11)	Spur magnitude reduction for enhanced spectral purity with low RF output power, for Port 1. (Required: R&S®ZNA43-B31, recommended: R&S®ZNA43-B16, R&S®ZNA43-B161, R&S®ZNA43-B21)

Anzeigen 1 - 6 von 9 Ergebnissen

Vector Network Analyzer, 4 ports 10 MHz to 43.5 GHz, 2.92 mm (m) connectors

Produkt-ID: P-294154

ZNA43-B16 (1332.4581.44) • Direct source and receiver access for R&S®ZNA43 (4 ports) Installation ex factory only (Hardware option)ZNA43-B21 (1332.4646.21) • Source step attenuator for port 1, mechanical, 70 dB in 10 dB steps for R&S®ZNA43 Installation ex factory only (Hardware option)ZNA43-B23 (1332.4646.23) • Source step attenuator for port 3, mechanical, 70 dB in 10 dB steps for R&S®ZNA43 Installation ex factory only (Hardware option)

Mieten

Bestätigung bei Angebotserstellung

Angebot

Menge

Wochen

Startdatum

Gebraucht

Verfügbarkeit bei Angebotserstellung bestätigt

Anfrage

E-Mail +49 6151 360 41-0

Finanzlösungen

Fragen Sie jetzt um mehr Informationen zu erhalten

Vector Network Analyzer, 4 ports 10 MHz to 43.5 GHz, 2.92 mm (m) connectors

Produkt-ID: P-225521

ZNA43-B34 (1332.4717.34) • Receiver step attenuator for port 4, mechanical, 35 dB in 5 dB steps for R&S®ZNA43 Installation ex factory only (Hardware option)ZNA-B5 (1332.4675.02) • 2nd internal LO source, for R&S®ZNA (4 ports) external access up to 26.5 GHz requires option R&S®ZNA-B8 in addition (Hardware option)ZNA43-B43 (1332.4781.43) • Internal pulse modulator for port 3 for R&S®ZNA43 (Hardware option)ZNA43-B23 (1332.4646.23) • Source step attenuator for port 3, mechanical, 70 dB in 10 dB steps for R&S®ZNA43 Installation ex factory only (Hardware option)ZNA43-B22 (1332.4646.22) • Source step attenuator for port 2, mechanical, 70 dB in 10 dB steps for R&S®ZNA43 Installation ex factory only (Hardware option)ZNA43-B42 (1332.4781.42) • Internal pulse modulator for port 2 for R&S®ZNA43 (Hardware option)ZNA43-B41 (1332.4781.41) • Internal pulse modulator for port 1 for R&S®ZNA43 (Hardware option)ZNA-B91 (1332.4800.02) • Additonal trigger and control I/O ports for R&S®ZNA 3 trigger in, 4 trigger out, 4 pulse modulator control ports (I/O switchable), busy and ready for trigger indication, noise source control (28 V), RF OFF control input (Hardware option)ZNA43-B32 (1332.4717.32) • Receiver step attenuator for port 2, mechanical, 35 dB in 5 dB steps for R&S®ZNA43 Installation ex factory only (Hardware option)ZNA43-B31 (1332.4717.31) • Receiver step attenuator for port 1, mechanical, 35 dB in 5 dB steps for R&S®ZNA43 Installation ex factory only (Hardware option)ZNA43-B44 (1332.4781.44) • Internal pulse modulator for port 3 for R&S®ZNA43 (Hardware option)ZNA-B26 (1332.4598.02) • Direct IF access for R&S®ZNA (Hardware option)ZNA43-B33 (1332.4717.33) • Receiver step attenuator for port 3, mechanical, 35 dB in 5 dB steps for R&S®ZNA43 Installation ex factory only (Hardware option)ZNA-B4 (1332.4530.02) • Precision frequency reference for R&S®ZNA (Hardware option)ZNA43-B21 (1332.4646.21) • Source step attenuator for port 1, mechanical, 70 dB in 10 dB steps for R&S®ZNA43 Installation ex factory only (Hardware option)ZNA43-B3 (1332.4617.02) • 3rd and 4th internal source for R&S®ZNA43 (4 ports) (Hardware option)ZNA43-B16 (1332.4581.44) • Direct source and receiver access for R&S®ZNA43 (4 ports) Installation ex factory only (Hardware option)

Mieten

Bestätigung bei Angebotserstellung

Angebot

Menge

Wochen

Startdatum

Gebraucht

Verfügbarkeit bei Angebotserstellung bestätigt

Anfrage

E-Mail +49 6151 360 41-0

Finanzlösungen

Fragen Sie jetzt um mehr Informationen zu erhalten

Vector Network Analyzer, 4 ports 10 MHz to 43.5 GHz, 2.92 mm (m) connectors

Produkt-ID: P-225520

ZNA-B8 (1332.4652.02) • mmWave converter LO, 10 MHz to 26.5 GHz, for R&S®ZNA Enables mmWave converter setups utilizing a R&S®ZNA, or general external (IF) mixing. (used for mmWave-converter setups: Requires one of options R&S®ZNA-B26, "Direct IF access", or R&S®ZNA-B5, "2nd internal LO src". Used as general mixer LO: Requires R&S®ZNA-B5, "2nd internal LO src") (Hardware option)ZNA43-B23 (1332.4646.23) • Source step attenuator for port 3, mechanical, 70 dB in 10 dB steps for R&S®ZNA43 Installation ex factory only (Hardware option)ZNA43-B42 (1332.4781.42) • Internal pulse modulator for port 2 for R&S®ZNA43 (Hardware option)ZNA43-B41 (1332.4781.41) • Internal pulse modulator for port 1 for R&S®ZNA43 (Hardware option)ZNA43-B43 (1332.4781.43) • Internal pulse modulator for port 3 for R&S®ZNA43 (Hardware option)ZNA43-B31 (1332.4717.31) • Receiver step attenuator for port 1, mechanical, 35 dB in 5 dB steps for R&S®ZNA43 Installation ex factory only (Hardware option)ZNA-B5 (1332.4675.02) • 2nd internal LO source, for R&S®ZNA (4 ports) external access up to 26.5 GHz requires option R&S®ZNA-B8 in addition (Hardware option)ZNA43-B163 (1332.4830.53) • Direct source monitor access on port 1 and port 3 before the source step attenuator for R&S®ZNA43 (4 ports) requires R&S®ZNA43-B16/-B21/-B23 Upgrade / retrofit by R&S service Memmingen only. (Hardware option)ZNA43-B213 (1332.4869.13) • Internal combiner, port 1ZNA-B4 (1332.4530.02) • Precision frequency reference for R&S®ZNA (Hardware option)ZNA43-B16 (1332.4581.44) • Direct source and receiver access for R&S®ZNA43 (4 ports) Installation ex factory only (Hardware option)ZNA43-B22 (1332.4646.22) • Source step attenuator for port 2, mechanical, 70 dB in 10 dB steps for R&S®ZNA43 Installation ex factory only (Hardware option)ZNA43-B33 (1332.4717.33) • Receiver step attenuator for port 3, mechanical, 35 dB in 5 dB steps for R&S®ZNA43 Installation ex factory only (Hardware option)ZNA43-B32 (1332.4717.32) • Receiver step attenuator for port 2, mechanical, 35 dB in 5 dB steps for R&S®ZNA43 Installation ex factory only (Hardware option)ZNA43-B34 (1332.4717.34) • Receiver step attenuator for port 4, mechanical, 35 dB in 5 dB steps for R&S®ZNA43 Installation ex factory only (Hardware option)ZNA43-B21 (1332.4646.21) • Source step attenuator for port 1, mechanical, 70 dB in 10 dB steps for R&S®ZNA43 Installation ex factory only (Hardware option)ZNA-B7 (1332.4546.02) • Memory extension for long time data recording, data streaming, extended pulse pattern recording for R&S®ZNA (Hardware option)ZNA43-B24 (1332.4646.24) • Source step attenuator for port 4, mechanical, 70 dB in 10 dB steps for R&S®ZNA43 Installation ex factory only (Hardware option)ZNA43-B3 (1332.4617.02) • 3rd and 4th internal source for R&S®ZNA43 (4 ports) (Hardware option)ZNA43-B44 (1332.4781.44) • Internal pulse modulator for port 3 for R&S®ZNA43 (Hardware option)

Mieten

Bestätigung bei Angebotserstellung

Angebot

Menge

Wochen

Startdatum

Gebraucht

Verfügbarkeit bei Angebotserstellung bestätigt

Anfrage

E-Mail +49 6151 360 41-0

Finanzlösungen

Fragen Sie jetzt um mehr Informationen zu erhalten

Vector Network Analyzer, 4 ports 10 MHz to 43.5 GHz, 2.92 mm (m) connectors

Produkt-ID: P-434356

ZNA43-B213 (1332.4869.13) • Internal combiner, port 1ZNA43-B23 (1332.4646.23) • Source step attenuator for port 3, mechanical, 70 dB in 10 dB steps for R&S®ZNA43 Installation ex factory only (Hardware option)ZNA43-B43 (1332.4781.43) • Internal pulse modulator for port 3 for R&S®ZNA43 (Hardware option)ZNA43-B33 (1332.4717.33) • Receiver step attenuator for port 3, mechanical, 35 dB in 5 dB steps for R&S®ZNA43 Installation ex factory only (Hardware option)ZNA43-B44 (1332.4781.44) • Internal pulse modulator for port 3 for R&S®ZNA43 (Hardware option)ZNA-B91 (1332.4800.02) • Additonal trigger and control I/O ports for R&S®ZNA 3 trigger in, 4 trigger out, 4 pulse modulator control ports (I/O switchable), busy and ready for trigger indication, noise source control (28 V), RF OFF control input (Hardware option)ZNA43-B302 (1332.4769.22) • Low noise pre-amplifier at receiver port 2, up to 43.5 GHz for R&S®ZNA43. (requires R&S®ZNA43-B16, R&S®ZNA43-B32)ZNA43-B16 (1332.4581.44) • Direct source and receiver access for R&S®ZNA43 (4 ports) Installation ex factory only (Hardware option)ZNA-B26 (1332.4598.02) • Direct IF access for R&S®ZNA (Hardware option)ZNA-B4 (1332.4530.02) • Precision frequency reference for R&S®ZNA (Hardware option)ZNA43-B34 (1332.4717.34) • Receiver step attenuator for port 4, mechanical, 35 dB in 5 dB steps for R&S®ZNA43 Installation ex factory only (Hardware option)ZNA-B5 (1332.4675.02) • 2nd internal LO source, for R&S®ZNA (4 ports) external access up to 26.5 GHz requires option R&S®ZNA-B8 in addition (Hardware option)ZNA43-B31 (1332.4717.31) • Receiver step attenuator for port 1, mechanical, 35 dB in 5 dB steps for R&S®ZNA43 Installation ex factory only (Hardware option)ZNA43-B22 (1332.4646.22) • Source step attenuator for port 2, mechanical, 70 dB in 10 dB steps for R&S®ZNA43 Installation ex factory only (Hardware option)ZNA43-B42 (1332.4781.42) • Internal pulse modulator for port 2 for R&S®ZNA43 (Hardware option)ZNA43-B24 (1332.4646.24) • Source step attenuator for port 4, mechanical, 70 dB in 10 dB steps for R&S®ZNA43 Installation ex factory only (Hardware option)ZNA-B7 (1332.4546.02) • Memory extension for long time data recording, data streaming, extended pulse pattern recording for R&S®ZNA (Hardware option)ZNA43-B501 (1332.5236.11) • Spur magnitude reduction for enhanced spectral purity with low RF output power, for Port 1. (Required: R&S®ZNA43-B31, recommended: R&S®ZNA43-B16, R&S®ZNA43-B161, R&S®ZNA43-B21)ZNA43-B163 (1332.4830.53) • Direct source monitor access on port 1 and port 3 before the source step attenuator for R&S®ZNA43 (4 ports) requires R&S®ZNA43-B16/-B21/-B23 Upgrade / retrofit by R&S service Memmingen only. (Hardware option)ZNA43-B21 (1332.4646.21) • Source step attenuator for port 1, mechanical, 70 dB in 10 dB steps for R&S®ZNA43 Installation ex factory only (Hardware option)ZNA43-B41 (1332.4781.41) • Internal pulse modulator for port 1 for R&S®ZNA43 (Hardware option)ZNA-B8 (1332.4652.02) • mmWave converter LO, 10 MHz to 26.5 GHz, for R&S®ZNA Enables mmWave converter setups utilizing a R&S®ZNA, or general external (IF) mixing. (used for mmWave-converter setups: Requires one of options R&S®ZNA-B26, "Direct IF access", or R&S®ZNA-B5, "2nd internal LO src". Used as general mixer LO: Requires R&S®ZNA-B5, "2nd internal LO src") (Hardware option)ZNA43-B32 (1332.4717.32) • Receiver step attenuator for port 2, mechanical, 35 dB in 5 dB steps for R&S®ZNA43 Installation ex factory only (Hardware option)ZNA43-B3 (1332.4617.02) • 3rd and 4th internal source for R&S®ZNA43 (4 ports) (Hardware option)

Mieten

Bestätigung bei Angebotserstellung

Angebot

Menge

Wochen

Startdatum

Gebraucht

Verfügbarkeit bei Angebotserstellung bestätigt

Anfrage

E-Mail +49 6151 360 41-0

Finanzlösungen

Fragen Sie jetzt um mehr Informationen zu erhalten

Vector Network Analyzer, 4 ports 10 MHz to 43.5 GHz, 2.92 mm (m) connectors

Produkt-ID: P-653139

ZNA43-B213 (1332.4869.13) • Internal combiner, port 1ZNA43-B33 (1332.4717.33) • Receiver step attenuator for port 3, mechanical, 35 dB in 5 dB steps for R&S®ZNA43 Installation ex factory only (Hardware option)ZNA43-B31 (1332.4717.31) • Receiver step attenuator for port 1, mechanical, 35 dB in 5 dB steps for R&S®ZNA43 Installation ex factory only (Hardware option)ZNA43-B163 (1332.4830.53) • Direct source monitor access on port 1 and port 3 before the source step attenuator for R&S®ZNA43 (4 ports) requires R&S®ZNA43-B16/-B21/-B23 Upgrade / retrofit by R&S service Memmingen only. (Hardware option)ZNA43-B16 (1332.4581.44) • Direct source and receiver access for R&S®ZNA43 (4 ports) Installation ex factory only (Hardware option)ZNA43-B41 (1332.4781.41) • Internal pulse modulator for port 1 for R&S®ZNA43 (Hardware option)ZNA43-B32 (1332.4717.32) • Receiver step attenuator for port 2, mechanical, 35 dB in 5 dB steps for R&S®ZNA43 Installation ex factory only (Hardware option)ZNA43-B42 (1332.4781.42) • Internal pulse modulator for port 2 for R&S®ZNA43 (Hardware option)ZNA43-B3 (1332.4617.02) • 3rd and 4th internal source for R&S®ZNA43 (4 ports) (Hardware option)ZNA-B5 (1332.4675.02) • 2nd internal LO source, for R&S®ZNA (4 ports) external access up to 26.5 GHz requires option R&S®ZNA-B8 in addition (Hardware option)ZNA-B26 (1332.4598.02) • Direct IF access for R&S®ZNA (Hardware option)ZNA43-B302 (1332.4769.22) • Low noise pre-amplifier at receiver port 2, up to 43.5 GHz for R&S®ZNA43. (requires R&S®ZNA43-B16, R&S®ZNA43-B32)ZNA43-B501 (1332.5236.11) • Spur magnitude reduction for enhanced spectral purity with low RF output power, for Port 1. (Required: R&S®ZNA43-B31, recommended: R&S®ZNA43-B16, R&S®ZNA43-B161, R&S®ZNA43-B21)ZNA43-B21 (1332.4646.21) • Source step attenuator for port 1, mechanical, 70 dB in 10 dB steps for R&S®ZNA43 Installation ex factory only (Hardware option)ZNA43-B34 (1332.4717.34) • Receiver step attenuator for port 4, mechanical, 35 dB in 5 dB steps for R&S®ZNA43 Installation ex factory only (Hardware option)ZNA-B91 (1332.4800.02) • Additonal trigger and control I/O ports for R&S®ZNA 3 trigger in, 4 trigger out, 4 pulse modulator control ports (I/O switchable), busy and ready for trigger indication, noise source control (28 V), RF OFF control input (Hardware option)ZNA43-B44 (1332.4781.44) • Internal pulse modulator for port 3 for R&S®ZNA43 (Hardware option)ZNA43-B43 (1332.4781.43) • Internal pulse modulator for port 3 for R&S®ZNA43 (Hardware option)ZNA-B8 (1332.4652.02) • mmWave converter LO, 10 MHz to 26.5 GHz, for R&S®ZNA Enables mmWave converter setups utilizing a R&S®ZNA, or general external (IF) mixing. (used for mmWave-converter setups: Requires one of options R&S®ZNA-B26, "Direct IF access", or R&S®ZNA-B5, "2nd internal LO src". Used as general mixer LO: Requires R&S®ZNA-B5, "2nd internal LO src") (Hardware option)ZNA-B7 (1332.4546.02) • Memory extension for long time data recording, data streaming, extended pulse pattern recording for R&S®ZNA (Hardware option)

Mieten

Bestätigung bei Angebotserstellung

Angebot

Menge

Wochen

Startdatum

Gebraucht

Verfügbarkeit bei Angebotserstellung bestätigt

Anfrage

E-Mail +49 6151 360 41-0

Finanzlösungen

Fragen Sie jetzt um mehr Informationen zu erhalten

Vector Network Analyzer, 4 ports 10 MHz to 43.5 GHz, 2.92 mm (m) connectors

Produkt-ID: P-549308

ZNA43-B41 (1332.4781.41) • Internal pulse modulator for port 1 for R&S®ZNA43 (Hardware option)ZNA-B5 (1332.4675.02) • 2nd internal LO source, for R&S®ZNA (4 ports) external access up to 26.5 GHz requires option R&S®ZNA-B8 in addition (Hardware option)ZNA43-B42 (1332.4781.42) • Internal pulse modulator for port 2 for R&S®ZNA43 (Hardware option)ZNA43-B3 (1332.4617.02) • 3rd and 4th internal source for R&S®ZNA43 (4 ports) (Hardware option)ZNA43-B16 (1332.4581.44) • Direct source and receiver access for R&S®ZNA43 (4 ports) Installation ex factory only (Hardware option)ZNA-B4 (1332.4530.02) • Precision frequency reference for R&S®ZNA (Hardware option)ZNA43-B44 (1332.4781.44) • Internal pulse modulator for port 3 for R&S®ZNA43 (Hardware option)ZNA-B91 (1332.4800.02) • Additonal trigger and control I/O ports for R&S®ZNA 3 trigger in, 4 trigger out, 4 pulse modulator control ports (I/O switchable), busy and ready for trigger indication, noise source control (28 V), RF OFF control input (Hardware option)ZNA43-B43 (1332.4781.43) • Internal pulse modulator for port 3 for R&S®ZNA43 (Hardware option)ZNA43-B21 (1332.4646.21) • Source step attenuator for port 1, mechanical, 70 dB in 10 dB steps for R&S®ZNA43 Installation ex factory only (Hardware option)ZNA43-B34 (1332.4717.34) • Receiver step attenuator for port 4, mechanical, 35 dB in 5 dB steps for R&S®ZNA43 Installation ex factory only (Hardware option)ZNA43-B23 (1332.4646.23) • Source step attenuator for port 3, mechanical, 70 dB in 10 dB steps for R&S®ZNA43 Installation ex factory only (Hardware option)ZNA-B26 (1332.4598.02) • Direct IF access for R&S®ZNA (Hardware option)ZNA43-B32 (1332.4717.32) • Receiver step attenuator for port 2, mechanical, 35 dB in 5 dB steps for R&S®ZNA43 Installation ex factory only (Hardware option)

Mieten

Bestätigung bei Angebotserstellung

Angebot

Menge

Wochen

Startdatum

Gebraucht

Verfügbarkeit bei Angebotserstellung bestätigt

Anfrage

E-Mail +49 6151 360 41-0

Finanzlösungen

Fragen Sie jetzt um mehr Informationen zu erhalten

Anzeigen 1 - 6 von 9 Ergebnissen

* Preise und Verfügbarkeit können ohne vorherige Ankündigung geändert werden. Alle Preise können aufgrund von Versandbedingungen, Mehrwertsteuer oder Umsatzsteuer, Einfuhrzöllen und Wechselkursen variieren. Produkte sind möglicherweise nicht an allen Standorten verfügbar. Alle aufgeführten Einsparungen basieren auf dem vollständigen Listenpreis neuer Instrumente. Die tatsächlichen Einsparungen können je nach Option (en), Konfiguration, Wechselkursen und anderen Faktoren variieren. Die Garantie kann je nach Kategorie oder verfügbarem Produkt variieren. Alle Bedingungen müssen durch ein vollständiges schriftliches Angebot bestätigt werden.

Wichtigste Daten

Zeigt auf Part-Ebene verfügbare Merkmale an. Weitere Part-Details finden Sie unter dem Tab 'Konfiguration'

Merkmal	Wert
High Frequency (range)	20GHz <= 50GHz
Low Frequency (range)	1MHz <= 10MHz
Connector Type	2.92mm-Male (Jack)
Form Factor	Benchtop

Produktübersicht

The ZNA vector network analyzers are the high-end series of the R&S VNA portfolio: excellent RF-performance is combined with a wide range of software features and a unique hardware concept. The touch-only operation together with the DUT-centric approach makes the ZNA a powerful, universal and compact measurement system for characterizing both, passive and active devices.

The ZNA features exceptional stability, low trace noise and excellent raw data, making it a perfect choice for development and production applications that require high accuracy, e.g. for developing and producing components and modules for A&D and satellite applications.

The ZNA offers four internal, phase-coherent sources, allowing independent control of the signal's frequency at each port as well as phase measurements on mixers. It provides two internal LO sources, a true multichannel receiver architecture, pulse generators and modulators, an internal combiner and comprehensive trigger and synchronization capabilities. These hardware features make the ZNA a universal, compact test system for active and passive device characterization. Even intermodulation measurements on mixers and receivers can be performed without external signal generators, minimizing test time and simplifying test configuration.

Key Features

10 MHz to 26.5/43.5/50/67 GHz (ZNA26/43/50/67)

Two or four port models available

Excellent RF-performance

Up to four integrated sources

Unique and intuitive touch-only operation

Benefits

Excellent RF-Performance

(High performance and fast speed for advanced measurement tasks)

- Precise measurements on active and passive components.

- Wide dynamic range to characterize even high-blocking devices under test.

- Excellent stability, low trace noise and outstanding raw system data for high reliability.

- High accuracy suitable also for metrology applications.

- Wide power sweep range.

Versatile Hardware Options

(Powerful and universal measurement system)

- Optional direct channel access for wide dynamic range, external test setups and system integration.

- Up to four internal phase-coherent sources for high flexibility and short sweep times.

- Up to two internal receiver LOs for fast mixer measurements with low trace noise.

- Up to eight independent receivers for reliable multi-channel phase measurements.

- Up to four internal pulse modulators and pulse generators.

- Optional source and receiver step attenuators for expanding the usable power range.

Wide Range of Software Options

(Challenging measurements configured intuitively)

- Time domain analsis and extended features as eye diagram for signal integrity.

- Scalar mixer measurements and frequency converting measurements.

- Vector mixer measurements for advanced mixer measurements.

- Frequency converting measurements on mixers/converters without LO access.

- Spectrum analysis mode for an extensive analysis of the device under test.

- Real Time Measurement uncertainty calculation plus verification measurement (METAS VNA Tools)

Unique Operational Concept

(Intuitive touch-based operation with sophisticated user interface)

- Two independent touchscreens for convenient operation.

- Display of user-selected content (e.g. SCPI commands) on smaller screen possible.

- Efficient operation with multi-touch gestures.

- Free configuration of channels, diagrams with drag-and-drop.

- DUT-centric approach that adapts to the user's requirements and optimizes the settings.

- Extensive evaluation features for detailed analysis of measurement traces.

Extension Units

(Advanced measurement capabilities)

- Frequency extension p to 1.1 THz with the ZVA-Z and ZC converter families.

Accessories for a Complete Solution

(Different accessories for calibration, verification and different measurements)

- Mechanical calibraton and verification kits.

- Automatic calibration units.

- Inline calibration units for in-situ refresh of calibration data.

- Test cables.

- Torque wrenches.

- Support of NRP power sensor family.

Specifications
ZNA Series Vector Network Analyzers
Model Overview
Model	Order Number	Ports	Frequency	Connectors
ZNA26	1332.4500.22	2 ports	10 MHz to 26.5 GHz	3.5 mm(m)
ZNA26	1332.4500.24	4 ports	10 MHz to 26.5 GHz	3.5 mm(m)
ZNA43	1332.4500.42	2 ports	10 MHz to 43.5 GHz	2.92 mm(m)
ZNA43	1332.4500.43	2 ports	10 MHz to 43.5 GHz	2.4 mm(m)
ZNA43	1332.4500.44	4 ports	10 MHz to 43.5 GHz	2.92 mm(m)
ZNA43	1332.4500.45	4 ports	10 MHz to 43.5 GHz	2.4 mm(m)
ZNA50	1332.4500.52	2 ports	10 MHz to 50 GHz	2.4 mm(m)
ZNA50	1332.4500.54	4 ports	10 MHz to 50 GHz	2.4 mm(m)
ZNA67	1332.4500.62	2 ports	10 MHz to 67 GHz	1.85 mm(m)
ZNA67	1332.4500.64	4 ports	10 MHz to 67 GHz	1.85 mm(m)

Specifications
ZNA-Kxx
Options Overview
Model	Order Number	Description
ZNA-K1	1332.5320.02	Spectrum analyzer mode
ZNA-K2	1332.5336.02	Time domain analysis (TDR)
ZNA-K4	1332.5342.02	Scalar mixer and arbitrary frequency-converting measurements
ZNA-K4	1332.5342.07	Scalar mixer and arbitrary frequency-converting measurements
ZNA-K4	1332.5342.13	Scalar mixer and arbitrary frequency-converting measurements
ZNA-K5	1332.5359.02	Vector corrected converter measurements (without reference mixer and phase reference)¹
ZNA-K5	1332.5359.07	Vector corrected converter measurements (without reference mixer and phase reference)¹
ZNA-K6	1332.5413.02	Phase coherent source control
ZNA-K7	1332.5371.02	Measurements on pulsed signals²
ZNA-K8	1332.5388.02	Millimeterwave converter support
ZNA-K9	1332.5394.02	Group delay measurements on frequency converters without LO access³
ZNA-K9	1332.5394.07	Group delay measurements on frequency converters without LO access³

Note:

¹ Requires R&S®ZNA-K4.

² Requires R&S®ZNA-K17.

³ Requires R&S®ZNA-K4, R&S®ZNAxx-B16, and an R&S®ZNAxx-Z9 cable set, or R&S®ZNA-B213 internal combiner, for generating a two-tone signal. An R&S®ZNA (4 ports) is strongly recommended.