You are browsing the DE site. Would you like to be redirected to another country or region to see content and products specific to your location?

Schnelles Angebot: Rohde & Schwarz ZNA26 (1332.4500.24)

Rohde & Schwarz ZNA26 (1332.4500.24)

Vector Network Analyzer; 4 Port, 3.5 mm Connector, 10 MHz to 26.5 GHz
Modell
ZNA26 (1332.4500.24)
Produktfamilie
RF & Microwave Network Analyzers
Hersteller
Rohde & Schwarz

Konfigurierte Modelle enthalten die folgenden Merkmale:

RF & Microwave Network AnalyzersNetwork Analyzers >=20GHz20GHz <= 50GHz1MHz <= 10MHz3.5mm-Male (Jack)Benchtop
Konfigurationen
Wichtigste Daten
Produktübersicht
Ressourcen

Wählen Sie Ihre Konfiguration

Show:

Verfügbare Optionen für Rohde & Schwarz ZNA26 (1332.4500.24)

Options-IDBeschreibung
Precision frequency reference for R&S®ZNA (Hardware option)
2nd internal LO source, for R&S®ZNA (4 ports) external access up to 26.5 GHz requires option R&S®ZNA-B8 in addition (Hardware option)
Memory extension for long time data recording, data streaming, extended pulse pattern recording for R&S®ZNA (Hardware option)
mmWave converter LO, 10 MHz to 26.5 GHz, for R&S®ZNA Enables mmWave converter setups utilizing a R&S®ZNA, or general external (IF) mixing. (used for mmWave-converter setups: Requires one of options R&S®ZNA-B26, ""Direct IF access"", or R&S®ZNA-B5, ""2nd internal LO src"". Used as general mixer LO: Requires R&S®ZNA-B5, ""2nd internal LO src"") (Hardware option)
Additional removable SSD
Direct IF access for R&S®ZNA (Hardware option)
Additonal trigger and control I/O ports for R&S®ZNA 3 trigger in, 4 trigger out, 4 pulse modulator control ports (I/O switchable), busy and ready for trigger indication, noise source control (28 V), RF OFF control input (Hardware option)
Spectrum analyzer mode for R&S®ZNA (software license)
Time domain analysis (TDR) for R&S®ZNA (software license)
Scalar mixer measurements and arbitrary frequency-converting measurements for R&S®ZNA (software license)
Vector corrected converter measurements (without reference mixer and phase reference) for R&S®ZNA requires R&S®ZNA-K4 (software license)
Measurements on pulsed signals (Pulse configuration, pulse profile and pulse train measurements) for R&S®ZNA requires R&S®ZNA-K17 (software license)
mmWave converter support for R&S®ZNA, R&S®ZVA-Zxxx, R&S®ZCxxx (software license)
Group delay measurements on frequency converters without LO access for R&S®ZNA (4 ports recommended) requires R&S®ZNAxx-B16/R&S®ZNA-K4 (software license)
Increased IF bandwidth up to 30 MHz for R&S®ZNA (software license)
1 mHz frequency resolution for R&S®ZNA (software license)
Extended time domain analysis incl. eye diagram for R&S®ZNA requires R&S®ZNA-K2 (software license)
Noise figure measurements on 2-port devices for ZNA (ZNAxx-B16/-B2x recommended) (software license)
In-Situ De-embedding (ISD) IEEE 370
3rd and 4th internal source for R&S®ZNA26 (4 ports) (Hardware option)
Direct source and receiver access for R&S®ZNA26 (4 ports) Installation ex factory only (Hardware option)
Source step attenuator for port 1, mechanical, 70 dB in 10 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)
Source step attenuator for port 2, mechanical, 70 dB in 10 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)
Source step attenuator for port 3, mechanical, 70 dB in 10 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)
Source step attenuator for port 4, mechanical, 70 dB in 10 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)
Receiver step attenuator for port 1, mechanical, 35 dB in 5 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)
Receiver step attenuator for port 2, mechanical, 35 dB in 5 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)
Receiver step attenuator for port 3, mechanical, 35 dB in 5 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)
Receiver step attenuator for port 4, mechanical, 35 dB in 5 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)
Internal pulse modulator for port 1 for R&S®ZNA26 (Hardware option)
Internal pulse modulator for port 2 for R&S®ZNA26 (Hardware option)
Internal pulse modulator for port 3 for R&S®ZNA26 (Hardware option)
Internal pulse modulator for port 3 for R&S®ZNA26 (Hardware option)
Direct source monitor access, port 1, R&S®ZNA26 (HW opt.)
Direct source monitor access for port 1 and port 3 before the source step attenuator for R&S ZNA26 (4 ports) requires R&S ZNA26-B16/-B21/-B23 (Hardware option) (B-option ex factory only, ZNAxx-Uxx for retrofit)
Internal combiner for port 1 and port 3 for R&S ZNA26 (4 ports) Provides a two-tone signal at Port 1, combining the internal sources of Port 1 and Port 3 (Hardware option. Requires R&S ZNA26-B21 and R&S ZNA26-B23)
Internal combiner for port 1 and port 3 for R&S®ZNA26 (4 ports). Provides a two-tone signal at Port 1, combining the internal sources of Port 1 and Port 3. Upgrade / retrofit by R&S service Memmingen only. (Hardware option. Requires R&S®ZNA26-B21 and R&S®ZNA26-B23)
Low noise pre-amplifier receiver port 2
Spur magnitude reduction for enhanced spectral purity with low RF output power, for Port 1. (Required: R&S ZNA26-B31, recommended: R&S ZNA26-B16, R&S ZNA26-B161, R&S ZNA26-B21)

Anzeigen 1 - 6 von 12 Ergebnissen

1
2
1

Vector Network Analyzer, 4 ports 10 MHz to 26.5 GHz, 3.5 mm (m) connectors

Produkt-ID: P-250366

ZNA-B7 (1332.4546.02) • Memory extension for long time data recording, data streaming, extended pulse pattern recording for R&S®ZNA (Hardware option)ZNA26-B32 (1332.4700.32) • Receiver step attenuator for port 2, mechanical, 35 dB in 5 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)ZNA-B26 (1332.4598.02) • Direct IF access for R&S®ZNA (Hardware option)ZNA26-B213 (1332.4846.13) • Internal combiner for port 1 and port 3 for R&S®ZNA26 (4 ports). Provides a two-tone signal at Port 1, combining the internal sources of Port 1 and Port 3. Upgrade / retrofit by R&S service Memmingen only. (Hardware option. Requires R&S®ZNA26-B21 and R&S®ZNA26-B23)ZNA26-B31 (1332.4700.31) • Receiver step attenuator for port 1, mechanical, 35 dB in 5 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)ZNA26-B23 (1332.4630.23) • Source step attenuator for port 3, mechanical, 70 dB in 10 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)
Mieten

Bestätigung bei Angebotserstellung

Angebot

Gebraucht

Verfügbarkeit bei Angebotserstellung bestätigt

Anfrage

Finanzlösungen

Fragen Sie jetzt um mehr Informationen zu erhalten

2

Vector Network Analyzer, 4 ports 10 MHz to 26.5 GHz, 3.5 mm (m) connectors

Produkt-ID: P-558728

ZNA26-B3 (1332.4523.02) • 3rd and 4th internal source for R&S®ZNA26 (4 ports) (Hardware option)ZNA-K8 (1332.5388.02) • mmWave converter support for R&S®ZNA, R&S®ZVA-Zxxx, R&S®ZCxxx (software license)ZNA-B8 (1332.4652.02) • mmWave converter LO, 10 MHz to 26.5 GHz, for R&S®ZNA Enables mmWave converter setups utilizing a R&S®ZNA, or general external (IF) mixing. (used for mmWave-converter setups: Requires one of options R&S®ZNA-B26, ""Direct IF access"", or R&S®ZNA-B5, ""2nd internal LO src"". Used as general mixer LO: Requires R&S®ZNA-B5, ""2nd internal LO src"") (Hardware option)ZNA-K30 (1332.5465.02) • Noise figure measurements on 2-port devices for ZNA (ZNAxx-B16/-B2x recommended) (software license)ZNA26-B23 (1332.4630.23) • Source step attenuator for port 3, mechanical, 70 dB in 10 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)ZNA-B5 (1332.4675.02) • 2nd internal LO source, for R&S®ZNA (4 ports) external access up to 26.5 GHz requires option R&S®ZNA-B8 in addition (Hardware option)
Mieten

Bestätigung bei Angebotserstellung

Angebot

Gebraucht

Verfügbarkeit bei Angebotserstellung bestätigt

Anfrage

Finanzlösungen

Fragen Sie jetzt um mehr Informationen zu erhalten

3

Vector Network Analyzer, 4 ports 10 MHz to 26.5 GHz, 3.5 mm (m) connectors

Produkt-ID: P-558729

ZNA26-B23 (1332.4630.23) • Source step attenuator for port 3, mechanical, 70 dB in 10 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)ZNA26-B21 (1332.4630.21) • Source step attenuator for port 1, mechanical, 70 dB in 10 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)ZNA-K4 (1332.5342.02) • Scalar mixer measurements and arbitrary frequency-converting measurements for R&S®ZNA (software license)ZNA26-B213 (1332.4846.13 ) • Internal combiner for port 1 and port 3 for R&S ZNA26 (4 ports) Provides a two-tone signal at Port 1, combining the internal sources of Port 1 and Port 3 (Hardware option. Requires R&S ZNA26-B21 and R&S ZNA26-B23)ZNA-B8 (1332.4652.02) • mmWave converter LO, 10 MHz to 26.5 GHz, for R&S®ZNA Enables mmWave converter setups utilizing a R&S®ZNA, or general external (IF) mixing. (used for mmWave-converter setups: Requires one of options R&S®ZNA-B26, ""Direct IF access"", or R&S®ZNA-B5, ""2nd internal LO src"". Used as general mixer LO: Requires R&S®ZNA-B5, ""2nd internal LO src"") (Hardware option)ZNA26-B16 (1332.4581.24) • Direct source and receiver access for R&S®ZNA26 (4 ports) Installation ex factory only (Hardware option)
Mieten

Bestätigung bei Angebotserstellung

Angebot

Gebraucht

Verfügbarkeit bei Angebotserstellung bestätigt

Anfrage

Finanzlösungen

Fragen Sie jetzt um mehr Informationen zu erhalten

4

Vector Network Analyzer, 4 ports 10 MHz to 26.5 GHz, 3.5 mm (m) connectors

Produkt-ID: P-549307

ZNA-B4 (1332.4530.02) • Precision frequency reference for R&S®ZNA (Hardware option)ZNA26-B44 (1332.4775.44) • Internal pulse modulator for port 3 for R&S®ZNA26 (Hardware option)ZNA26-B41 (1332.4775.41) • Internal pulse modulator for port 1 for R&S®ZNA26 (Hardware option)ZNA26-B42 (1332.4775.42) • Internal pulse modulator for port 2 for R&S®ZNA26 (Hardware option)ZNA26-B43 (1332.4775.43) • Internal pulse modulator for port 3 for R&S®ZNA26 (Hardware option)ZNA-B91 (1332.4800.02) • Additonal trigger and control I/O ports for R&S®ZNA 3 trigger in, 4 trigger out, 4 pulse modulator control ports (I/O switchable), busy and ready for trigger indication, noise source control (28 V), RF OFF control input (Hardware option)
Mieten

Bestätigung bei Angebotserstellung

Angebot

Gebraucht

Verfügbarkeit bei Angebotserstellung bestätigt

Anfrage

Finanzlösungen

Fragen Sie jetzt um mehr Informationen zu erhalten

5

Vector Network Analyzer, 4 ports 10 MHz to 26.5 GHz, 3.5 mm (m) connectors

Produkt-ID: P-549304

ZNA-B91 (1332.4800.02) • Additonal trigger and control I/O ports for R&S®ZNA 3 trigger in, 4 trigger out, 4 pulse modulator control ports (I/O switchable), busy and ready for trigger indication, noise source control (28 V), RF OFF control input (Hardware option)ZNA26-B21 (1332.4630.21) • Source step attenuator for port 1, mechanical, 70 dB in 10 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)ZNA26-B44 (1332.4775.44) • Internal pulse modulator for port 3 for R&S®ZNA26 (Hardware option)ZNA26-B41 (1332.4775.41) • Internal pulse modulator for port 1 for R&S®ZNA26 (Hardware option)ZNA26-B42 (1332.4775.42) • Internal pulse modulator for port 2 for R&S®ZNA26 (Hardware option)ZNA26-B3 (1332.4523.02) • 3rd and 4th internal source for R&S®ZNA26 (4 ports) (Hardware option)
Mieten

Bestätigung bei Angebotserstellung

Angebot

Gebraucht

Verfügbarkeit bei Angebotserstellung bestätigt

Anfrage

Finanzlösungen

Fragen Sie jetzt um mehr Informationen zu erhalten

6

Vector Network Analyzer, 4 ports 10 MHz to 26.5 GHz, 3.5 mm (m) connectors

Produkt-ID: P-549305

ZNA-B91 (1332.4800.02) • Additonal trigger and control I/O ports for R&S®ZNA 3 trigger in, 4 trigger out, 4 pulse modulator control ports (I/O switchable), busy and ready for trigger indication, noise source control (28 V), RF OFF control input (Hardware option)ZNA26-B21 (1332.4630.21) • Source step attenuator for port 1, mechanical, 70 dB in 10 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)ZNA26-B44 (1332.4775.44) • Internal pulse modulator for port 3 for R&S®ZNA26 (Hardware option)ZNA26-B41 (1332.4775.41) • Internal pulse modulator for port 1 for R&S®ZNA26 (Hardware option)ZNA26-B34 (1332.4700.34) • Receiver step attenuator for port 4, mechanical, 35 dB in 5 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)ZNA-B26 (1332.4598.02) • Direct IF access for R&S®ZNA (Hardware option)
Mieten

Bestätigung bei Angebotserstellung

Angebot

Gebraucht

Verfügbarkeit bei Angebotserstellung bestätigt

Anfrage

Finanzlösungen

Fragen Sie jetzt um mehr Informationen zu erhalten

Anzeigen 1 - 6 von 12 Ergebnissen

1
2
* Preise und Verfügbarkeit können ohne vorherige Ankündigung geändert werden. Alle Preise können aufgrund von Versandbedingungen, Mehrwertsteuer oder Umsatzsteuer, Einfuhrzöllen und Wechselkursen variieren. Produkte sind möglicherweise nicht an allen Standorten verfügbar. Alle aufgeführten Einsparungen basieren auf dem vollständigen Listenpreis neuer Instrumente. Die tatsächlichen Einsparungen können je nach Option (en), Konfiguration, Wechselkursen und anderen Faktoren variieren. Die Garantie kann je nach Kategorie oder verfügbarem Produkt variieren. Alle Bedingungen müssen durch ein vollständiges schriftliches Angebot bestätigt werden.

Nicht fündig geworden?

Nehmen Sie Kontakt auf
Nicht fündig geworden?
loader
loader logo