You are browsing the CN site. Would you like to be redirected to another country or region to see content and products specific to your location?
US
快速报价: Amplifier Research 75S1G6C
Amplifier Research 75S1G6C
Solid State Amplifier; 75W CW, 1GHz - 6GHz
型号
75S1G6C产品类别
RF & Microwave Power制造商
Amplifier Research配置型号包含以下特性:
RF & Microwave PowerNoise & OtherAmplifiers > 1GHz配置
技术指标
产品总览
资源
让我们为您提供准确的配置
技术指标
请参考资源中的资料文档或查看产品总览。
如果您想了解更多，请 联系，我们的团队将为您提供帮助。
产品总览
The Model 75S1G6C is a solid-state, Class A design, self-contained, air-cooled, broadband power amplifier designed for applications where instantaneous bandwidth, high gain, and linearity are required. It will provide a minimum of 75 W across its operating bandwidth. Protection from input overdrive beyond 0 dBm is provided as well as protection from various failure conditions including over-temperature and power supply faults.
| Key Features |
| 75 Watts CW, 1.0 - 6.0 GHz |
| Class A design |
| 100% mismatch tolerant |
| Built-in fault monitoring and protection |
| Remote control: Ethernet, USB, GPIB, fiber-optic serial, RS-232 |
| Modular design for easy maintenance and service |
| Low acoustical noise |
| Benefits | |
| Front Panel Display | A front panel display indicates the operational status and fault conditions. All amplifier control functions, and status indications are available remotely using GPIB/IEEE-488, RS-232, fiber-optic serial, USB, or Ethernet. Interface connectors are located on the back panel. Local and remote operation is managed by a switch on the front panel. |
| Multiple Purpose Amplifier | This is a multiple purpose amplifier. The low level of spurious signals and linearity make it ideal for use as a driver in testing wireless and communication components and subsystems. By covering such a wide bandwidth, it is suitable for 5G testing applications. Due to the Class A design, it is also suitable for EMC Test applications where continued operation into high VSWR loads including open and short circuits is required. |
| Export Classification | The export classification for this equipment is 3A001. These commodities, technology or software are controlled for export in accordance with the U.S. Export Administration Regulations. Diversion contrary to U.S. law is prohibited. |
| Applications |
| EMC (military, aviation, automotive, commercial) |
| Radiated and conducted EMC testing |
| General purpose, antenna, and component testing |
| Specifications | ||||
75S1G6C Solid State Amplifier | ||||
| Feature | Symbol | Minimum | Typical | Maximum |
| Rated Power Output | PSAT | 75W | 85W | >125W |
| Input for Rated Output | Pin | -- | -- | 1.0mW 0dBm |
| Power Output @ 1 dB Compression | P1dB | 50W | 70W | >100W |
| Power Output @ 3 dB Compression | P3dB | 65W | 85W | >120W |
| Operating Frequency | BW | 1.0GHz | -- | 6.0GHz |
| Gain (Small Signal) | 51dB | 54dB | 56dB | |
Gain Reduction Adjustment (when below compression) | 10dB | 12dB | 15dB | |
| Flatness | ∆G | -- | ±1.5dB | ±2.5dB |
| Input Impedance | Z in | -- | 50Ω 1.5:1 VSWR | -- 2.0:1 VSWR |
| Output Impedance | Z out | -- | 50Ω | -- |
| 3rd Order Intercept | IP3 | -- | +56dBm | -- |
| Noise Figure | NF | -- | 10dB | -- |
Harmonic Distortion @ 75 W (for entire band except 2 - 3 GHz) | H2, H3 | -- | -30dBc | -20dBc |
Harmonic Distortion @ 75 W (for 2 – 3 GHz) | H2, H3 | -- | -22dBc | -18dBc |
| Spurious | -- | -73dBc | -- | |
| Power Consumption | PD | -- | -- | 450W |
| Specifications | |
75S1G6C Solid State Amplifier | |
| Feature | Parameter |
| Mechanical | |
Dimensions (With Cabinet) (W x H x D) | 51.0 x 17.0 x 65.3cm 20.1 x 6.7 x 25.7in |
Dimensions (No Cabinet) – 3U for 19” Rack | 48.3 x 13.4 x 65.3cm 19.0 x 5.3 x 25.7in |
Weight (With Cabinet) | 26.5kg 58.5lb |
Weight (No Cabinet) | 15.8kg 34.75lb |
| Cooling | Forced air (self-contained fans) Side inlets / rear outlet Δt = +7°C (typical) |
Acoustical Noise (Measured @ 1 meter from the front) | 56dBA (typical) |
| Regulatory Compliance | EMC: EN 61326-1 Safety: UL 61010-1 CAN/CSA C22.2 #61010-1 CENELEC EN 61010-1 RoHS: Directive 2011/65/EU Export: 3A001 |
| Connector Interfaces | RF input: N female (50 Ω) RF output: N female (50 Ω) IEEE-488: 24-pin female RS-232: 9-pin subminiature D female RS-232 (fiber optic): ST USB 2.0: Type B Ethernet: RJ-45 Interlock: 15-pin subminiature D female AC: C14 |
资源
文件资料
Amplifier Research Model 75S1G6C Data Sheet
找不到您要的?
联系方式
