You are browsing the CN site. Would you like to be redirected to another country or region to see content and products specific to your location?
US
配置型号包含以下特性:
RF & Microwave Network AnalyzersNetwork Analyzers >=20GHz20GHz <= 50GHz1MHz <= 10MHz2.4mm-Male (Jack)Benchtop特性 | 参数 |
---|---|
High Frequency (range) | 20GHz <= 50GHz |
Low Frequency (range) | 1MHz <= 10MHz |
Connector Type | 2.4mm-Male (Jack) |
Form Factor | Benchtop |
10 MHz to 50 GHz, 2-ports with one source and 4-ports with two sources, source and receiver attenuators, bias-tees, pulse generators and modulators, noise figure, and best RF performance.
The PNA Series of network analyzers offers industry-leading performance for testing amplifiers, mixers, and frequency converters. The PNA Series combines hardware and applications to measure a broad range of devices fast and accurately. All models are available in two-port single-source and four-port dual-source versions. Built-in pulse modulators and pulse generators provide pulsed S-parameter measurements.
Key Features |
Measure S-parameters with the smallest uncertainty and highest stability |
Efficiently characterize active components with applications that simplify setups |
Wide dynamic range: >127dB dynamic range at test port (typical) above 500MHz |
131 dB receiver dynamic range 32,001 points, 32 channels, 15MHz IF bandwidth |
High output power: (+13dBm) and a wide power sweep range (38dB) |
Low noise floor: -114dBm at 10Hz IF bandwidth |
12.1 inch color LCD, touch screen |
RF connector type 2.4mm (m), 50ohm |
4 USB on Front panel 2.0 compatible |
VGA video output |
Built in Handler I/O, LAN, USB, GPIB interfaces and Peripheral ports on rear |
Benefits |
Solve your toughest measurement challenges with the highest-performing microwave network analyzer in the industry. |
Measure S-parameters with the smallest uncertainty and highest stability. |
Efficiently characterize active components with applications that simplify setups. |
Accelerate insight into component behavior using a multitouch display and intuitive user interface. |
Meet your budget and measurement requirements by customizing to the right level of performance. |
Specifications | |
N5225B PNA Network Analyzer | |
Feature | Parameter |
Maximum Frequency | 50 GHz |
Number of Built-In Ports | 2 or 4 ports |
Harmonics | -60 dBc |
Network Analyzer Series | PNA High Performance |
Specifications | |
PNA Series Network Analyzers | |
Model Overview | |
Model | Description |
N5221B | 900 Hz/10 MHz to 13.5 GHz |
N5222B | 900 Hz/10 MHz to 26.5 GHz |
N5224B | 900 Hz/10 MHz to 43.5 GHz |
N5225B | 900 Hz/10 MHz to 50 GHz |
N5227B | 900 Hz/10 MHz to 67 GHz (70 GHz) |
Specifications | ||
PNA Family Network Analyzers Overview | ||
Model | Frequency | Test Port Connector |
PNA-X Series | ||
N5249B | 900 Hz/10 MHz to 8.5 GHz | 3.5 mm (male) |
N5241B | 900 Hz/10 MHz to 13.5 GHz | 3.5 mm (male) |
N5242B | 900 Hz/10 MHz to 26.5 GHz | 3.5 mm (male) |
N5244B | 900 Hz/10 MHz to 43.5 GHz | 2.4 mm (male) |
N5245B | 900 Hz/10 MHz to 50 GHz | 2.4 mm (male) |
N5247B | 900 Hz/10 MHz to 67 GHz (70 GHz) | 1.85 mm (male) |
PNA Series | ||
N5221B | 900 Hz/10 MHz to 13.5 GHz | 3.5 mm (male) |
N5222B | 900 Hz/10 MHz to 26.5 GHz | 3.5 mm (male) |
N5224B | 900 Hz/10 MHz to 43.5 GHz | 2.4 mm (male) |
N5225B | 900 Hz/10 MHz to 50 GHz | 2.4 mm (male) |
N5227B | 900 Hz/10 MHz to 67 GHz (70 GHz) | 1.85 mm (male) |
PNA-L Series | ||
N5239B | 300 kHz to 8.5 GHz | 3.5 mm (male) |
N5231B | 300 kHz to 13.5 GHz | 3.5 mm (male) |
N5232B | 300 kHz to 20 GHz | 3.5 mm (male) |
N5234B | 10 MHz to 43.5 GHz | 2.4 mm (male) |
N5235B | 10 MHz to 50 GHz | 2.4 mm (male) |