产品仪器制造商服务解决方案促销资源/博客关于我们

快速报价: Schwarzbeck NNBM 8124-800 BNC

400 819 2800需要帮忙？请与我们的专家联系

Schwarzbeck NNBM 8124-800 BNC

Single Path Vehicle AMN (LISN); BNC (f) Connector

型号

NNBM 8124-800 BNC

产品类别

RF & Microwave Network Analyzers

制造商

Schwarzbeck

配置型号包含以下特性:

RF & Microwave Network AnalyzersEMC / EMI / RFI Analyzers100MHz <= 1GHz1kHz <= 100kHz

配置

技术指标

产品总览

资源

选择您的配置

显示:

搜索和整合选项，例如“C4000; M400”

Schwarzbeck NNBM 8124-800 BNC的可用选项

找不到配置

显示中 1 - 1 的 1 结果

Automotive LISN acc. CISPR 25 and ISO 7637-2 and for BCI-Testing. Imped-ance (5μH + 1 Ohm) || 50 Ohm

产品编号: P-244485

租赁

查询报价

报价

数量

周

开始日期

二手购置

查询报价

查询

电子邮件 400 819 2800

其他购置方案

查询我们的金融解决方案

显示中 1 - 1 的 1 结果

* 价格及供应情况如有更改，恕不另行通知。所有价格可能因运输条款、增值税或销售税、进口关税和汇率而有所不同。产品可能不是在所有地区都能买到。任何列出的折扣是基于全新仪器的售价并仅供参考;实际折扣可能会因选项、配置、货币汇率和其他因素而有所不同。保修期可能因仪器类别或特定产品而有差异。所有条款均需通过完整的书面报价确认。

¹ 对于我们的品质二手仪器，在发货前需要进行23步认证检查

技术指标

在选择附件时标明其特性，有关附件详细信息请参见“配置”选项。

特性	参数
High Frequency (range)	100MHz <= 1GHz
Low Frequency (range)	1kHz <= 100kHz

产品总览

The main application of the unsymmetrical single path AMN (artificial mains network) NNBM 8124-800 is the measurement of interference voltage in vehicles, aircrafts and ships within the HF-VHF range 0.1 – 150 MHz.

The NNBM 8124-800 can also be used for bulk current injection (BCI) testing. The impedance characteristic is implemented according to CISPR 16-1-2 and CISPR 25 with (5µH + 1 Ohm) || 50 Ohm.

The continuous current rating is 800 A, for a short time more than 1000 A are possible. With its high voltage and current specification this automotive LISN fits well for electric vehicle (EV), hybrid drive and on-board battery electronics testing. The EuT is connected to the wing terminals at the front panel. The mains terminals are on the backside.

Key Features

Automotive LISN acc. CISPR 25 and ISO 7637-2 and for BCI-Testing

Impedance (5µH + 1 Ohm) || 50 Ohm

Max. 800 A. With switchable 50 Ohm load and switchable 1 mikrofarad capacitor at mains side, single path

BNC female connector

Note:

Option N connector

N-female connector instead of BNC.