You are browsing the CN site. Would you like to be redirected to another country or region to see content and products specific to your location?
US
快速报价: Keysight Technologies N7555A
Keysight Technologies N7555A
Electronic Calibration Module; 2-Port, DC to 26.5 GHz
型号
N7555A产品类别
RF & Microwave Network Analyzers制造商
Keysight Technologies配置型号包含以下特性:
RF & Microwave Network AnalyzersCal Kits20GHz <= 50GHzDCAccessory配置
技术指标
产品总览
资源
让我们为您提供准确的配置
技术指标
在选择附件时标明其特性， 有关附件详细信息请参见“配置”选项。
| 特性 | 参数 |
|---|---|
| High Frequency (range) | 20GHz <= 50GHz |
| Low Frequency (range) | DC |
| Form Factor | Accessory |
产品总览
The N7555A is part of Keysight’s family of value-line electronic calibration (ECal) modules that makes calibration of vector network analyzers fast, easy and accurate. Cut your calibration down to half the time it normally takes using a traditional mechanical cal kit. Simply connect it to your instrument and the firmware does the rest. For greater precision and higher accuracy measurements consider the N44xx and N469x family of ECal products.
The N7555A supports Keysight’s , PNA-X, PNA, ENA, and PXI vector network analyzers and FieldFox handheld analyzers. The N7555A is a 2-port ECal module that supports 3.5 mm connectors. As a value-line product, it makes it cost effective to replace the N7555A than to have it recertified.
The firmware installed on the instrument is used to control the calibration module, making it a fully integrated solution. The calibration code on the instrument communicates via a USB 2.0 micro-interface and simplifies the calibration to a single connection for a full two-port calibrated measurement.
| Key Features |
| Frequency coverage from DC to 26.5 GHz |
| Supports 3.5 mm connectors |
| Smaller, lighter 2-port ECal module |
| Zero wait time for faster calibration |
| Convenience of ECal with the performance of an economy mechanical kit |
| Specifications | |
| Electronic Calibration (ECal) Module Overview | |
| Model | Description |
| N755xA Series 2-port Economy ECal Modules | |
| N7550A | DC to 4 GHz |
| N7551A | DC to 6.5 GHz |
| N7552A | DC to 9 GHz |
| N7553A | DC to 14 GHz |
| N7554A | DC to 18 GHz |
| N7555A | DC to 26.5 GHz |
| 8509xC Series 2-port RF ECal Modules | |
| 85091C | 300 kHz to 9 GHz |
| 85092C | 300 kHz to 9 GHz |
| 85093C | 300 kHz to 9 GHz |
| 85096C | 300 kHz to 3 GHz |
| 85098C | 300 kHz to 7.5 GHz |
| 85099C | 300 kHz to 3 GHz |
| N469xD Series 2-port Microwave ECal Modules | |
| N4690D | DC / 300 kHz to 18 GHz |
| N4691D | DC / 300 kHz to 26.5 GHz |
| N4692D | DC / 10 MHz to 40 GHz |
| N4693D | DC / 10 MHz to 50 GHz |
| N4694D | DC / 10 MHz to 67 GHz |
| N4696D | DC / 300 kHz to 18 GHz |
| N443xA/B Series 4-port ECal Modules | |
| N4431B | 9 kHz to 13.5 GHz |
| N4432A | 300 kHz to 18 GHz |
| N4433A | 300 kHz to 20 GHz |
| N443xD Series 4-port Ecal Modules | |
| N4431D | DC to 13.5 GHz |
| N4432D | DC/300 KHz to 18 GHz |
| N4433D | DC/300 KHz to 26.5 GHz |
| Specifications | |
| RF Electronic Calibration Module (ECal) | |
| Options and Accessories | |
| Part Number | Description |
| N7554A-150 | Plastic storage box |
| N7554A-1A7 | Calibration + Uncertainties + Guardbanding (Not Accredited) |
| N7554A-3FF | Both 3.5 mm connectors are female on module |
| N7554A-3MF | 1 female and 1 male connector on module, both 3.5 mm |
| N7554A-3MM | Both 3.5 mm connectors are male on module |
| N7554A-A6J | ANSI Z540-1-1994 Calibration |
| N7554A-NFF | Both type-N 50 connectors are female on module |
| N7554A-NMF | 1 female and 1 male connector on module, both type-N 50 |
| N7554A-NMM | Both type-N 50 connectors are male on module |
| N7554A-UK6 | Commercial calibration certificate with test data |
| N7550X-151 | 3.5 or 2.92 Torque Wrench |
| N7550X-152 | Type-N Torque Wrench |
找不到您要的?
联系方式
