产品仪器制造商服务解决方案促销资源/博客关于我们

快速报价: Aim-TTi EX354T

400 819 2800需要帮忙？请与我们的专家联系

Aim-TTi EX354T

DC Power Supply; 3 outputs, 305W

型号

EX354T

产品类别

Power Supplies / Electronic Loads

制造商

Aim-TTi

配置型号包含以下特性:

Power Supplies / Electronic LoadsDC Power Supplies <50V

配置

技术指标

产品总览

资源

让我们为您提供准确的配置

请使用“获取快速报价”，我们将根据您的需求与您联系并报价。

您也可以选择保持联系，我们会为您提供正确的应用和采购解决方案。

产品总览

The EX354D and EX354T provide high levels of power (up to 305 watts) in a compact and attractive case style. High resolution controls allow precise setting of voltage and current levels which are indicated on accurate and legible digital meters. Excellent line and load regulation are matched by low noise and good transient response. High power efficiency ensures that the unit remains cool without any fan noise.

The EX354T has, in addition ‘logic voltage’ output with a 5A current capability. This output can be Selected between 5 volts or 3.3V volts via a front panel control. The total power capability is 280 watts for the dual supply and 305 watts for the triple.

The EX series incorporates separate digital voltage and current meters on each main output. The meters use bright 14mm (0·56”) LED displays and have an update rate of 4 per second providing near instantaneous response. Simultaneous metering of voltage and current provides accurate information “at a glance” and avoids any possibility of misinterpretation. When an output switch is set to “off”, the current limit setting is displayed enabling conditions to be set before the load is connected. With the right-hand main output off, the right-hand meters can be used to momentarily display the preset Auxiliary voltage and current limit.

To reflect the increasing usage of low-voltage logic devices, the third output of the EX354T can be switched between 5V and 3.3V.

The EX series has been designed to meet the stringent requirements of relevant IEC standards for safety and EMC, including harmonics emissions. All outputs are intrinsically short circuit proof, and are protected against external voltages and reverse currents.

Key Features

Dual isolated outputs of 0 to 35V at 0 to 4A each

Separate digital voltage and current meters for each output

Constant voltage or constant current operation

Isolated 5A 'logic' output switchable 5V or 3.3V

Compact and light weight design with low heat output

Specifications
EX Series DC Power Supply
Model Overview
Model	EX354TV	EX354D	EX354T
Voltage Range	0V to 35V minimum	0V to 35V minimum	0V to 35V minimum
Current Range	0A to 4A minimum	0A to 4A minimum	0A to 4A minimum
Operating Mode	Constant voltage or constant current with automatic cross-over	Constant voltage or constant current with automatic cross-over	Constant voltage or constant current with automatic cross-over
Load Regulation	<0.01% of maximum output for 90% load change	<0.01% of maximum output for 90% load change	<0.01% of maximum output for 90% load change
Line Regulation	<0.01% of maximum output for 10% line change	<0.01% of maximum output for 10% line change	<0.01% of maximum output for 10% line change
Output Impedance	Typically <5mΩ in constant voltage mode. Typically >50kΩ in constant current mode	Typically <5mΩ in constant voltage mode. Typically >50kΩ in constant current mode	Typically <5mΩ in constant voltage mode. Typically >20kΩ in constant current mode
Output Protection:	Output will withstand up to 40V forward voltage	Outputs will withstand forward voltages up to 40V	Outputs will withstand forward voltages up to 40V
Output Terminals	Universal 4mm safety binding posts on 19mm (0.75”) pitch	Universal 4mm safety binding posts on 19mm (0.75”) pitch	4mm terminals on 19mm (0.75") pitch
Ripple & Noise (20MHz bandwidth)	Typically <2mVrms, <10mVpk-pk (CV mode)	Typically <2mVrms, <10mVpk-pk (CV mode)	Typically <2mV rms, <10mV pk-pk, (CV mode)
Voltage Setting	By coarse and fine controls	By coarse and fine controls	By coarse and fine controls
Current Setting	By single logarithmic control	By single logarithmic control	By single logarithmic control
AC Input	110V - 240V AC ± 10%, 50/60Hz. Installation Category II	110V - 240V AC ± 10%, 50/60Hz. Installation Category II	110V - 240V AC ± 10%, 50/60Hz. Installation Category II
Power Consumption	500VA max	500VA max	500VA max
Operating Range	+5ºC to +40ºC, 20% to 80% RH	+5ºC to +40ºC, 20% to 80% RH	+5ºC to +40ºC, 20% to 80% RH
Storage Range	−40ºC to + 70ºC	−40ºC to + 70ºC	−40ºC to + 70ºC
Environmental	Indoor use at altitudes up to 2000m, Pollution Degree 2	Indoor use at altitudes up to 2000m, Pollution Degree 2	Indoor use at altitudes up to 2000m, Pollution Degree 2
Safety	Complies with EN61010-1. EMC: Complies with EN61326	Complies with EN61010-1. EMC: Complies with EN61326	Complies with EN61010-1. EMC: Complies with EN61326
Weight	4.3 kg	4.3 kg	4.3 kg

Specifications
EX354T DC Power Supply
Model Overview
Features	Parameters
Logic Output:
Voltage	5V or3.3V, selectable by front panel control switch
Meter Voltage Accuracy	± 2%
Current Limit	5A
Output Protection	Output will withstand up to 7V forward voltage. Diode clamp reverse protection for currents to 3A
Load Regulation	<0.5% for 90% load change
Line Regulation	<0.01% for 10% line voltage change
Ripple & Noise (20MHz bandwidth)	Typically <2mVrms, <10mVpk-pk (CV mode)
Transient Response	Typically <200µs to within 50mV of set level for 90% load change
Temperature Coefficient	Typically <100ppm/ºC
Output terminals	4mm terminals on 19mm (0.75") pitch
Status Indication	Current limit lamp

找不到您要的?

联系方式