The Infiniium V-Series family has the best-in-class signal integrity real-time oscilloscopes in the industry, delivering the most margin for your design validation. They are ideal for spectral analysis of transients and wideband RF applications.
DSA models come standard with 100 Mpts/channel, EZJIT Complete (N8823B), and Serial Data Analysis (E2688A). EZJIT Complete software (N8823B) includes all of the advanced jitter analysis features of EZJIT (E2681A) and EZJIT Plus (N5400A) and adds vertical noise analysis capabilities.
Key Features:
- True analog bandwidth to 33 GHz on 2-CH (16GHz on 4-Ch)
- Lowest noise floor (2.10 mV at 50 mV/div, 33 GHz)
- Lowest intrinsic jitter (100 fs)
- Highest Effective Number Of Bits (ENOB) values in excess of 5.5
- Flattest frequency magnitude and phase response
- Spurious Frequency Dynamic Range (SFDR) exceeding 50 dBc
- 80 GSa/s sample rate 2 channels / 40 GSa/s sample rate 4 channels
- Industry deepest memory with up to 2 Gpts (100 Mpts per ch std DSA)
- Industry longest 160-bit, 12.5 Gb/s hardware serial trigger
Infiniium V 系列家族拥有业界一流的讯号完整性实时示波器,为您的设计验证提供最大的余裕。它们非常适合瞬态频谱分析和宽带射频应用。
DSA 型号标配 100 Mpts/通道、EZJIT Complete (N8823B) 和串行数据分析 (E2688A)。 EZJIT Complete 软件 (N8823B) 包含 EZJIT (E2681A) 和 EZJIT Plus (N5400A) 的所有进阶抖动分析功能,并增加了垂直噪音分析功能。
主要特征:
- 2 频道上的真实模拟带宽高达 33 GHz(4 频道上为 16GHz)
- 最低本底噪声(50 mV/格时为 2.10 mV,33 GHz)
- 最低的固有抖动 (100 fs)
- 最高有效位数 (ENOB) 值超过 5.5
- 最平坦的频率幅度和相位响应
- 噪声频率动态范围 (SFDR) 超过 50 dBc
- 80 GSa/s 取样率 2 通道 / 40 GSa/s 取样率 4 通道
- 业界最深的内存,高达 2 Gpts(每通道 100 Mpts 标准 DSA)
- 业界最长的 160 位、12.5 Gb/s 硬件串行触发
立即前往挑选更多 : Keysight 示波器
Most of these applications also support Spread Spectrum Clocking (SSC) where the highspeed signal is modulated, and the V-Series hardware serial trigger is able to track the SSC with its unique external reference clock input. The hardware serial trigger will recover and generate a sub-rate clock when locked to the signal
PRBS Error Detector:
Industrys First PRBS error detector can trigger and display the bit error of the PRBS-7, 15, 23 and 31 signals. It identifies the error when the pattern does not match the expected PRBS pattern that has been set in the oscilloscope. When the next error happens, the oscilloscope will replace the display with the next bit error. This allows you to discover if the error is related to the bit pattern, which is related to Inter-Symbol Interference (ISI). The hardware serial trigger provides an eyescan plot to show the signal quality of the signal received.
Wideband and Multi-channel FFT measurements:
For frequency domain measurements that require you to see more than 500 MHz of signal spectral bandwidth and multiple FFTs simultaneously, the V-Series offers wider bandwidth than spectrum analyzers and comes standard with 4 ports (channels) per instrument. The V-Series enables users to make wideband measurements up to 33 GHz and up to 16 simultaneous FFTs. You can analyze even higher bandwidth signals by combining the V-Series with a down converter circuit.