You are browsing the CN site. Would you like to be redirected to another country or region to see content and products specific to your location?
US
快速报价: Keysight Technologies N2803A
Keysight Technologies N2803A
InfiniiMax III Series Probe Amplifier; 30 GHz
型号
N2803A制造商
Keysight Technologies配置型号包含以下特性:
Oscilloscope Probes20GHz <= 50GHz配置
技术指标
产品总览
资源
让我们为您提供准确的配置
技术指标
在选择附件时标明其特性， 有关附件详细信息请参见“配置”选项。
| 特性 | 参数 |
|---|---|
| High Frequency (range) | 20GHz <= 50GHz |
产品总览
The InfiniiMax III probing system provides the highest bandwidth and incredibly low loading to allow for a completely new level of signal fidelity and accuracy. Four different InfiniiMax III probe amplifiers ranging from 16 GHz to 30 GHz are available for matching your probing solution to your performance and budget requirements. A proprietary 200 GHz fT InP (indium phosphide) IC process with backside ground vias and novel thick film technology is utilized for the InfiniiMax III probe system to accommodate your highest performance needs and is unmatched by any product in the market.
InfiniiMax III 探测系统提供最高的带宽和极低的负载，从而将讯号保真度和精度提升到全新水平。四种不同的 InfiniiMax III 探头放大器（频率范围为 16 GHz 至 30 GHz）可用于将您的探测解决方案与您的性能和预算要求相匹配。 InfiniiMax III 探头系统采用专有的 200 GHz fT InP（磷化铟）IC 工艺，具有背面接地通孔和新颖的厚膜技术，可满足您的最高性能需求，是市场上任何产品都无法比拟的。
| Key Features |
| Full 30 GHz to the probe tip (with the N5445A browser) |
| Industry’s lowest probe and scope system noise |
| Industry’s highest fidelity and accuracy due to bandwidth and extremely low loading |
| Probe amplifiers loaded with measured s-parameters for more accurate response correction |
| Probe bandwidth upgradable |
| Variety of probe heads for different use models with maximum usability |
| Specifications | |
N2803A InfiniiMax III Series Probe Amplifier | |
| Feature | Parameter |
| Bandwidth | 30 GHz Tr = 14.3 psec |
| Range | DC attenuation ratio: 6:1 (3:1 with 200 Ω ZIF tip) Input voltage range: 1.6 Vpp (0.8 Vpp with 200 Ω ZIF tip) Input common mode range: ±12 V at DC to 250 Hz, ±2.5 V at >250 Hz (±6 V at DC to 250 Hz, ±1.25 V at >250 Hz with 200 Ω ZIF tip) Offset range : ±16 V when probing a single-ended signal |
| Input Impedance | DC input resistance: R diff = 100 kΩ ±2%, R se = 50 kΩ ±2% Input resistance @ >10 kHz: R diff = 1 kΩ, R se = 500 Ω Input capacitance: C diff = 32 fF, C se = 48 fF (with ZIF probe head) |
| Recommended Probe Heads | N5445A 30 GHz Browser Probe Head N5444A 30 GHz 2.92/3.4 mm SMA Probe Head N5439A 28 GHz ZIF probe Head MX0109A 26 GHz Solder-in Probe Head |
| Oscilloscope Connectivity | UXR 3.5mm oscilloscope UXR 1&1.85mm oscilloscope with N2852A adapter 90000X, Q, V, Z-series oscilloscopes |
| Specifications | ||
| InfiniiMax III Series Probe Amplifier | ||
| Model Overview | ||
| Model | Description | Recommended Oscilloscope |
| N2800A | 16 GHz InfiniiMax III probe amplifier | Infiniium 90000X Series 16 GHz models |
| N2801A | 20 GHz InfiniiMax III probe amplifier | Infiniium 90000X/Q Series 20 GHz models |
| N2802A | 25 GHz InfiniiMax III probe amplifier | Infiniium 90000X/Q Series 25 GHz models |
| N2803A | 30 GHz InfiniiMax III probe amplifier | Infiniium 90000X/Q Series 28 GHz - 63 GHz models |
资源
文件资料
Keysight InfiniiMax III III+ Probing System Data Sheet.pdf
找不到您要的?
联系方式
