8100-Series OTDR EVO Modules; For T-BERD/MTS-6000A/-8000 Platforms.
The VIAVI Solutions 8100-Series OTDR EVO family transforms fiber testing. Connect the OTDR EVO family anywhere on the fiber to characterize single-mode and multimode fibers for commissioning, network upgrades, and troubleshooting with the added insurance of workflow optimization and accurate fiber-link fingerprinting.
| Important Mainframe Details |
These OTDR Modules are generally bundled with a handheld mainframe. Ready to be used as a unit to shoot fiber optic cables and to test link loss at the job site.
For full information on mainframe capability, check the configuration to see which mainframe is bundled. Then, check our page on Viavi OTDR mainframes for full descriptions and datasheets.
|
| Key Features |
| Up to 50 dB dynamic range |
| Integrated CW light source and broadband power meter (single-mode wavelengths) |
| PON-optimized to test through a 1x128 splitter |
| Single connector port for 1310, 1550, and inservice 1650 nm wavelengths |
| FiberComplete™ version available for automated bidirectional OTDR, IL, and ORL measurements |
| Built-in encircled flux multimode source compliant with IEC 61280-1-4 and TIA-526- 14-B |
| Benefits |
| Industry-leading dead zone performance for full element event characterization on fiber links 2 m apart |
| Includes an integrated power meter, light source, and OTDR in a one-port tool for added flexibility |
| Instantaneous, automatic traffic detection avoids risking live signal interference or optical transmitter damage during an OTDR test |
| Eliminates OTDR interpretation errors with Smart Link Mapper (SLM) without compromising on test time |
| Reduces event loss measurement uncertainty and improves measurement repeatability |
| Specifications |
|
|
|
|
8100-Series
OTDR EVO Modules
|
|
|
|
|
| Module Overview |
|
|
|
|
| OTDR Modules | 8100A | 8100B | 8100C | 8100D |
| Central Wavelength(1) | 850 +10/-30 nm;
1300 ±20 nm;
1310 ±20 nm;
1550 ±20 nm;
1625 ±20 nm
| 1310 ±20 nm;
1550 ±20 nm;
1625 ±20 nm
| 1310 ±20 nm;
1490 ±20 nm;
1550 ±20 nm;
1625 ±10 nm;
1650 +15/–5 nm
| 1310 ±20 nm;
1550 ±20 nm;
1625 +15/–5 nm;
1650 ±1 nm
|
| Dynamic Range(2) | Multimode: 24/24
Single-mode: 40/40/40 dB
| 41/40/40 dB | 47.5/46/47/47.5/46 dB | 50/50/50/48 dB |
| Pulse Width | Multimode: 1 ns to 20 µs Single-mode: 3 ns to 20 µs | 5 ns to 20 µs | 2 ns to 20 µs | 2 ns to 20 µs |
| Event Dead Zone(3) | Multimode: 0.25 m Single-mode: 0.60 m | 0.65 m | 0.5 m(9) | 0.5 m |
| Attenuation Dead Zone(4) | 2 m | 2 m | 2 m | 2.5 m |
| Splitter Attenuation Dead Zone | 25 m after a 15 dB splitter loss (single-mode only) | 25 m after a 15 dB splitter loss | 25 m after a 15 dB splitter loss/60 m after a 18 dB splitter loss | 15 m after a 15 dB splitter loss |
| Power Meter |
|
|
|
|
| Calibrated Wavelengths(5) | N/A | 1310/1490/1550/1625 nm | 1310/1490/1550/1625 nm | 1310/1490/1550/1625 nm |
| Power Range | N/A | –3 to –55 dBm | –3 to –55 dBm | –5 to –55 dBm |
| Accuracy(6) | N/A | ±0.5 dB at –30 dBm | ±0.5 dB at –30 dBm | ±0.5 dB at –30 dBm |
| Continuous Wave Light Source(7) |
|
|
|
|
| Wavelengths | 850/1300/1310/1550/1625 nm | 1310/1550/1625 nm | 1310/1490/1550/1625 nm | 1310/1550/1625 nm |
| Output Power | 0 dBm | –3.5 dBm | –3.5 dBm | 0 dBm |
| Stability | ±0.2 dB @25°C over 1 hr | ±0.1 dB at 25°C over 1 hour | ±0.1 dB at 25°C over 1 hour | ±0.1 dB at 25°C over 1 hour |
| Operating Modes(8) | 8 CW (single-mode only), 270 Hz, 330 Hz, 1 kHz, 2 kHz, Twintest | CW, 270 Hz, 330 Hz, 1 kHz, 2 kHz, TWINtest | CW, 270 Hz, 330 Hz, 1 kHz, 2 kHz, TWINtest | 270 Hz, 330 Hz, 1 kHz, 2 kHz, TWINtest |
Notes:
(1) Laser at 25°C and measured at 10 µs.
(2) The one-way difference between the extrapolated backscattering level at the start of the fiber and the RMS (SNR=1) noise level, after 3 minutes averaging using the largest pulse width.
(3) Measured at ±1.5 dB below the peak of an unsaturated reflective event using the shortest pulse width.
(4) Measured ±0.5 dB from the linear regression using an FC/UPC reflectance and the shortest pulse width.
(5) 1625 nm is not available on the 8138C-65 version.
(6) At calibrated wavelengths.
(7) At calibrated wavelengths; multimode source (850 nm) is compliant to the IEC 61280-1-4 standard related to the encircled flux.
(8) Subtract 3 dB when in modulation mode (270 Hz/330 Hz/1 kHz/2 Khz).
(9) Measured at 1.5 dB below the peak of an unsaturated 27 dB reflective event using the shortest pulse width.
| Specifications |
|
| OTDR Modules |
|
| Module Overview |
|
| Part Number | Description |
| 8100A Modules |
|
| E8146A | 850/1300/1310/1550 nm OTDR module(2) |
| E8156A | 850/1300/1310/1550/1625 nm OTDR module(2) |
| 8100B Modules |
|
| E8126B | 1310/1550 nm OTDR module |
| E8136B | 1310/1550/1625 nm OTDR module |
| 8100C Modules |
|
| E8115C | 1550 nm OTDR module(1) |
| E81162C | In-service 1625 nm OTDR module(1) |
| E81165C | In-service 1650 nm OTDR module(1) |
| E8126C | 1310/1550 nm OTDR module |
| E8136C | 1310/1550/1625 nm OTDR module |
| E8139C | 1310/1490/1550 nm OTDR module |
| E8138C-65 | 1310/1550 and in-service 1650 nm OTDR module |
| 8100D Modules |
|
| E8115D | 1550 nm OTDR module(1) |
| E81162D | In-service 1625 nm OTDR module(1) |
| E81165D | In-service 1650 nm OTDR module(1) |
| E8126D | 1310/1550 nm OTDR module |
| E8129D-62 | 1550/1625 nm OTDR module(1) |
| E8136D | 1310/1550/1625 nm OTDR module |
| Universal Optical Connectors |
|
| EUNIPCFC, EUNIPCSC, EUNIPCST, EUNIPCDIN | Straight connectors |
| EUNIAPCFC, EUNIAPCSC, EUNIAPCDIN | 8° angled connectors |
Notes:
(1) Source and power meter not available on these versions.
(2) APC connector not available on these versions.
