The SR704 is a general purpose 1000AAC current probe designed for use with DMMs, loggers and other instruments that have a current input. It has a 1000:1 ratio and output of 1mA per amp measured in the jaw.
The SR704 has an integral 5 ft (1.5m) lead terminated by shrouded banana plugs. The rounded jaw design on this probe makes it well-suited for power applications where high accuracy and low phase shift and wide frequency response are important.
Key Features |
Measurement range of 1mA to 1200Aac |
Large jaw opening accommodates conductors up to two 500MCM conductors |
Ergonomic design and easy operation |
Low phase shift for power measurements |
Available with mA output signals |
Designed for DMMs, recorders, loggers, oscilloscopes, power and harmonic meters |
UL approved |
Specifications |
|
AC Current Probe Model SR704 |
|
Features | Parameters |
Maximum Conductor Size | 2.05" (52mm) |
Current Range | 1000Arms AC |
Measurement Range | 1 to 1200A |
Output | 5 ft (1.5m) lead with safety 4mm banana plug |
Transformation Ratio | 1000:1 |
Output Signal | 1mA/A AC (1A @ 1000A) |
Accuracy 50/60Hz | 0.3% @ 1000A |
Frequency Range | 30Hz to 5kHz |
Phase Shift at 50Hz | 0.7° @ 1000A |
Open Secondary Voltage | Limited to <25V |
Load Impedance | 5Ω max |
Overload | 1200A for 40 mn ON then 20 mn OFF |
Dimensions
(H x W x D)
| 4.37 x 8.50 x 1.77”
(111 x 216 x 45mm)
|
Weight | 1.21 lbs
(550g)
|
Operating Temperature | 14° to +122°F
(-10° to +50°C)
|
Storage Temperature | -4° to +158°F
(-20° to +70°C)
|
Operating Humidity | 90% RH |
Pollution Degree | 2 |
Ingress Protection (IP) | IP40 |
EMC | EN 61326-1 |
Safety Compliance | EN/IEC 61010-1 600V CAT III,
EN/IEC 61010-032
|
Specifications |
|
AEMC SR700 Seriec AC Current Probe |
|
Part Number | Description |
2116.29 | AC Current Proe Model SR701 |
2116.30 | AC Current Proe Model SR704 |
2116.32 | AC Current Proe Model SR752 |
2116.33 | AC Current Proe Model SR759 |