The MN185 is a high accuracy mini probe for measurements to 120AAC. This probe uses a special magnetic core to provide higher accuracy and lower phase shift. The MN185 provides an output signal of 1mAAC/AAC. The output termination are standard 4mm banana jacks.
Key Features
Measurement range of 1mA to 150Aᴀᴄ
Jaw opening of 0.78"
Accommodates conductors up to 0.47" in diameter
Ergonomic design and easy operation
Compact size accommodates hard to reach locations
Low phase shift for power measurements
Available with mV or mA output signals
Constructed with UL94VO flame retardant material
Designed for DMMs, Recorders, loggers and oscilloscopes
Specifications
AC Current Probe Model MN185
Features
Parameters
Maximum Clamping Diameter
0.47" (12mm)
Current Range
120Arms AC
Measurement Range
50mA to 120AAC
Output Signal
1mAAC / AAC (120mA @ 120A)
Transformation Ratio
1000:1
Output
5 ft (1.5m) lead with 4mm safety banana plug
Accuracy 50/60Hz
1% R ± 0.01A (typical)
Frequency Range
30Hz to 10kHz
Phase Shift at 50/60Hz
<3.5°
Open Secondary Voltage
N/A
Load Impedance
5Ω max
Weight
5.6 oz (160g)
Dimensions (HxWxD)
1.26 x 4.5 x 0.87” (32 x 115 x 22mm)
Operating Temperature
-13° to +122°F (-25° to +50°C)
Storage Temperature
-40° to +176°F (-40° to +80°C)
Rating
UL 94 V0
Safety
250V working voltage, 30V max common mode between output and ground, 3kV 50/60Hz dielectric for 1mm