MP1900A series is an 8-slot modular, high-performance BERT supporting all-in-one Physical layer measurements of both high-speed network interfaces as NRZ and PAM4, and PCI Express/USB, bus interfaces.
To cope with increasing data traffic caused by the widespread popularity of smartphones and mobile terminals, data-center network interfaces are being transitioned to the faster 200 GbE/400 GbE/800 GbE standards, while communications-equipment interconnects are adopting PCI Express Gen5 supporting faster speeds of 32 Gbit/s; multi-channel technologies are also being deployed.
Anritsu’s Signal Quality Analyzer-R MP1900A series is a high-performance BERT with 8 slots for modules, such as PPG, ED and Jitter/Noise Generator, to expand measurement applications supporting signal integrity analyses of ever-faster devices. In addition to Physical layer measurement functions for broadband network interfaces, the all-in-one MP1900A supports PCI Express bus, etc., interface measurements.
All-in-One Support for Evaluating Next-Generation NRZ/PAM4 Network Interfaces and High-Speed Serial Buses
The Signal Quality AnalyzerR MP1900A is a modular Bit Error Rate Tester (BERT) supporting equipment external interfaces, such as nextgeneration Ethernet, by installing a pulse pattern generator (PPG) for outputting high-quality multi-channel NRZ/PAM4 signals over a wide bandwidth of 2.4 Gbit/s to 32.1 Gbit/s, a high-sensitivity input error detector (ED), Jitter modulation sources for Jitter Tolerance tests, etc. Additionally, optional noise generation and 10Tap Emphasis functions can be installed for Voltage Noise Tolerance tests, etc., and installingthe High-Speed Serial Data Test Software MX183000A software enables efficient design evaluation for increasingly faster PCIe, USB, and Thunderbolt receivers.
| Key Features |
|
| PAM4 Test Solution | 512 Gbit/s max. transmission capacity
PAM4 PPG/ED (MU196020A/MU196040A):
Baud rate of 2.4 to 64.2 Gbaud*¹
Multichannel Scalability 4ch PAM4/NRZ NEW
High-speed Tr/Tf of 8.5 ps (20 to 80%)
Low Intrinsic Jitter output of random Jitter 170 fs rms (typ.)
Low noise and low distortion high-quality data output
4Tap Emphasis (20-dB Range)
ISI adjustment function NEW
FEC pattern generation NEW
Stressed margin BER < E-12*²
Built-in Clock Recovery
PAM4 pattern editor and symbol error measurement
Jitter Addition, Jitter Tolerance measurement functions (SJ/RJ/BUJ/SSC)
Voltage Noise Addition function (Common/Differential/White Noise)
Jitter Tolerance measurement using DUT BER counter function NEW
|
High-Speed Serial BUS Test Solution
(PCI Express, USB, Thunderbolt)
| 512 Gbit/s max. transmission capacity, one main frame expandable to 16ch (filling 8 slots with 32 Gbit/s 2 ch PPG)
All-in-one support for both high-speed Ethernet and PCI Express interface tests
New wideband 32 Gbit/s SI PPG/ED (MU195020A/MU195040A):
Bit rate of 2.4 Gbit/s to 32.1 Gbit/s
NRZ/PAM4 Support
10Tap Emphasis
Variable ISI function
Multi-band CTLE (8 Gbit/s, 16 Gbit/s, 28 Gbit/s bandwidths)
Low Intrinsic Jitter output of random Jitter 115 fs rms (typ.)
High-sensitivity Data input of 15 mV typ. (EYE Height)
1ch/2ch Selection
PCI Express Link Training, LTSSM analysis (using MU195020A/MU195040A/MX183000A-PL021)
USB Express Link Training, LTSSM analysis (using MU195020A/MU195040A/MX183000A-PL022)
Jitter Addition, Jitter Tolerance measurement functions (SJ/RJ/BUJ/SSC, using MU181500B/MX183000A-PL001)
Voltage Noise Addition function (Common/Differential/White Noise, using MU195020A/MU195050A)
|
Notes:
*1 Future support for ED (Over 32.1G)
*2 At PAM4 Stressed waveform input refer to CEI
| Target Applications |
100 GbE/200 GbE/400 GbE/800 GbE,
CEI-25G/28G/56G/112G,
InfiniBand EDR/HDR,
Fibre Channel
PCI Express Gen1/2/3/4/5,
Thunderbolt 1/2/3,
USB3.2/4 Type C,
SAS-3/-4,
DP1.4,
Optical module,
SERDES,
AOC,
High-speed Interconnect
|
| Specification |
|
| MP1900A Signal Quality Analyzer |
|
| Feature | Parameter |
| LCD | 12.1-inch, WXGA 1280 x 800 |
| Remote Interface | GPIB, LAN |
| Module Slots | 8 |
| External Peripheral I/F | USB x6, VGA x1, HDMI x1 |
| OS | Windows Embedded Standard 7 |
| Power | 100V(ac) to 120V(ac)/200V(ac) to 240 V(ac)
50 Hz to60 Hz |
| Power Consumption | 1350 VA max. |
| Dimensions/Mass | 340 (W) x 222.5 (H) x 451 (D) mm / 20 kg max. (excluding modules) |
| Specifications |
|
MP1900A
Signal Quality Analyzer-R
|
|
| Model / Order Number | Description |
| MP1900A | Signal Quality Analyzer-R *¹ |
| MP1900A-110 | Windows10 Upgrade Retrofit *² |
| MP1900A-ES310 | Three Years Extended Warranty Service |
| MP1900A-ES510 | Five Years Extended Warranty Service |
| MU195020A | 21G/32G bit/s SI PPG |
| MU195040A | 21G/32G bit/s SI ED |
| MU196020A | PAM4 PPG |
| MU196040B | PAM4 ED |
| MU196040A | PAM4 ED |
| MU181000B | 12.5 GHz 4port Synthesizer |
| MU195050A | Noise Generator |
| MU181500B | Jitter Modulation Source |
| MX181500A | Jitter/Noise Tolerance Test Software |
Notes:
*¹ The Windows 10 OS will be installed in all orders from July 1, 2020.
*² MP1900A main units running Windows Embedded Standard 7 are retrofitted to Windows 10 using a hardware upgrade. Anritsu destroys the unnecessary, post-upgrade Windows Embedded Standard 7 parts. For details, contact our sales representative.
High-Speed Serial Data
Test Software for MP1900A
|
|
| MX183000A/PL001 | Jitter Tolerance Test |
| MX183000A/PL011 | PCIe Link Sequence |
| MX183000A/PL021 | PCIe Link Training |
| MX183000A/PL012 | USB Link Sequence |
| MX183000A/PL022 | USB Link Training |
