You are browsing the BE_NL site. Would you like to be redirected to another country or region to see content and products specific to your location?
US
Snelle Offerte: Rohde & Schwarz FSV30 (1321.3008.30)
Rohde & Schwarz FSV30 (1321.3008.30)
FSV Signal and Spectrum Analyzer; 10 Hz to 30 GHz
Model
FSV30 (1321.3008.30)Productgroep
RF & Microwave Spectrum AnalyzersFabrikant
Rohde & SchwarzGeconfigureerde modellen bevatten de volgende opties:
RF & Microwave Spectrum AnalyzersSpectrum Analyzers-Performance20GHz <= 50GHzDC <= 1kHzBenchtopConfiguraties
Belangrijke specificaties
Productoverzicht
Hulpbronnen
Kies uw configuratie
Show:
Beschikbare opties voor Rohde & Schwarz FSV30 (1321.3008.30)
| Optie-ID | Beschrijving |
|---|---|
| Accredited Calibration Coverage 4 Years from delivery for FSV30 w/o K54-Call: - 1 scheduled R&S®Accredited- Calibration according to the 24 month recommended calibration interval - All necessary R&S®Accredited- Calibrations in case of repair or option upgrade | |
| Accredited Calibration Coverage 4 Years from delivery for FSV30 with K54-Cal: - 1 scheduled R&S®Accredited- Calibration according to the 24 month recommended calibration interval - All necessary R&S®Accredited- Calibrations in case of repair or option upgrade | |
| Accredited Calibration Coverage 5 Years from delivery for FSV30 w/o K54-Call: - 2 scheduled R&S®Accredited- Calibrations according to the 24 month recommended calibration interval - All necessary R&S®Accredited- Calibrations in case of repair or option upgrade | |
| Accredited Calibration Coverage 5 Years from delivery for FSV30 with K54-Cal: - 2 scheduled R&S®Accredited- Calibrations according to the 24 month recommended calibration interval - All necessary R&S®Accredited- Calibrations in case of repair or option upgrade | |
| R&S®Accredited Calibration for FSV30 W/O K54-CAL - Accredited calibration certificate - ISO 17025 accredited and ISO 9001 certified, traceability to national/ international standards - Measurement of complete product specifications with the same procedures as used in production, incl. measurement uncertainties/ guardbanding - Documentation of calibration results upon receipt | |
| R&S®Accredited Calibration for FSV30 WITH K54-CAL - Accredited calibration certificate - ISO 17025 accredited and ISO 9001 certified, traceability to national/ international standards - Measurement of complete product specifications with the same procedures as used in production, incl. measurement uncertainties/ guardbanding - Documentation of calibration results upon receipt | |
| Extension of the 3 year standard product warranty to 4 years and Accredited Calibration Coverage for FSV30 w/o K54-Call for 4 years: - 1 scheduled R&S®Accredited- Calibration according to the 24 month recommended calibration interval - All repairs and all necessary R&S®Accredited-Calibrations after repair or option upgrade | |
| Extension of the 3 year standard product warranty to 4 years and Accredited Calibration Coverage for FSV30 with K54-Cal for 4 years: - 1 scheduled R&S®Accredited- Calibration according to the 24 month recommended calibration interval - All repairs and all necessary R&S®Accredited-Calibrations after repair or option upgrade | |
| Extension of the 3 year standard product warranty to 5 years and Accredited Calibration Coverage for FSV30 w/o K54-Call for 5 years: - 2 scheduled R&S®Accredited- Calibrations according to the 24 month recommended calibration interval - All repairs and all necessary R&S®Accredited-Calibrations after repair or option upgrade | |
| Extension of the 3 year standard product warranty to 5 years and Accredited Calibration Coverage for FSV30 with K54-Cal for 5 years: - 2 scheduled R&S®Accredited- Calibrations according to the 24 month recommended calibration interval - All repairs and all necessary R&S®Accredited-Calibrations after repair or option upgrade | |
| Calibration Coverage 4 Years from delivery for FSV30 w/o K54-Call: - 1 scheduled R&S®Manufacturer- Calibration according to the 24 month recommended calibration interval - All necessary R&S®Manufacturer- Calibrations in case of repair or option upgrade | |
| Calibration Coverage 4 Years from delivery for FSV30 with K54-Cal: - 1 scheduled R&S®Manufacturer- Calibration according to the 24 month recommended calibration interval - All necessary R&S®Manufacturer- Calibrations in case of repair or option upgrade | |
| Calibration Coverage 5 Years from delivery for FSV30 w/o K54-Call: - 2 scheduled R&S®Manufacturer- Calibrations according to the 24 month recommended calibration interval - All necessary R&S®Manufacturer- Calibrations in case of repair or option upgrade | |
| Calibration Coverage 5 Years from delivery for FSV30 with K54-Cal: - 2 scheduled R&S®Manufacturer- Calibrations according to the 24 month recommended calibration interval - All necessary R&S®Manufacturer- Calibrations in case of repair or option upgrade | |
| Extension of the 3 year standard product warranty to 4 years and Calibration Coverage for FSV30 w/o K54-Call for 4 years: - 1 scheduled R&S®Manufacturer- Calibration according to the 24 month recommended calibration interval - All repairs and all necessary R&S®Manufacturer-Calibrations after repair or option upgrade | |
| Extension of the 3 year standard product warranty to 4 years and Calibration Coverage for FSV30 with K54-Cal for 4 years: - 1 scheduled R&S®Manufacturer- Calibration according to the 24 month recommended calibration interval - All repairs and all necessary R&S®Manufacturer-Calibrations after repair or option upgrade | |
| Extension of the 3 year standard product warranty to 5 years and Calibration Coverage for FSV30 w/o K54-Call for 5 years: - 2 scheduled R&S®Manufacturer- Calibrations according to the 24 month recommended calibration interval - All repairs and all necessary R&S®Manufacturer-Calibrations after repair or option upgrade | |
| Extension of the 3 year standard product warranty to 5 years and Calibration Coverage for FSV30 with K54-Cal for 5 years: - 2 scheduled R&S®Manufacturer- Calibrations according to the 24 month recommended calibration interval - All repairs and all necessary R&S®Manufacturer-Calibrations after repair or option upgrade | |
| Documentation of calibration values | |
| Printout of DCV (additional, in combination with DCV-Option only) | |
| USB mass memory write protection, disables writing to USB memory sticks (ex factory only) (for FSP, FSQ, FSU with WinXP+SP2 and FSV) | |
| Option: Ruggedized housing with adjustable carrying handle (not retrofittable, not for rack mounting) | |
| Option: AM/FM demodulator for listening; includes loudspeaker, plug for headphone and volume control | |
| Option: OCXO, precision frequency reference Aging per year: 0.1 ppm Temp. drift: 0.1 ppm (5 to 45 °C) | |
| Option: OCXO, precision frequency reference, aging per year: 0.1 ppm improved specification of temp. drift: 0.01ppm (5 to 40°C) | |
| Option: Additional interfaces. IF/Video/AM-FM-demod. output, AUX port, trigger output, 2 additional USB(A) connectors | |
| Tracking generator: for R&S®FSV7/13/30/40 (100 kHz-7 GHz); for R&S®ESR7 ( 9 kHz-7 GHz); for R&S®FSV3 (100 kHz-3,6 GHz); for R&S®ESR3 ( 9 kHz-3,6 GHz); | |
| External generator control | |
| Ultra high precision frequency reference Aging: < 4x10-9/year, retrofittable in Rohde & Schwarz service excludes R&S®FSV-B4 (hardware option) | |
| Digital baseband interface, retrofittable, detector board Rev. 05.01 required, for R&S®FSV | |
| Solid State Drive for R&S®FSV with FMR9 and Win7 including analyzer firmware, replaces standard hard disk (hardware option) | |
| Solid state drive for R&S®FSV/FSVA with FMR11 and Win 7 including analyzer firmware, replaces standard hard disk (hardware option) | |
| Solid state drive for R&S®FSV/FSVA with FMR11 and Win 10 including analyzer firmware, for exchange against standard hard drive (hardware option) | |
| Second hard disk drive for FSV with FMR9 and Win7 including analyzer firmware, for exchange against standard hard drive (hardware option) | |
| Second hard disk drive for FSV with FMR11 and Win7 including analyzer firmware, for exchange against standard hard drive (hardware option) | |
| Second hard disk for R&S®FSV with FMR11 and Win10 including analyzer firmware, for exchange against standard hard drive (hardware option) | |
| LO/IF connections for external mixers (FSV30 / FSV40) | |
| RF Preamplifier 20 dB, 9 kHz to 7 GHz | |
| RF preamplifier 9kHz to 30GHz (for R&S® FSV30 only) not installable post factory | |
| Electronic attenuator, 1 dB steps (software license) | |
| 20Hz Frequency extension | |
| Extension to 40MHz signal analysis bandwidth | |
| Extension to 160MHz signal analysis bandwidth, for R&S®FSV4 and R&S®FSV7, retrofittable in Rohde & Schwarz service (hardware option) | |
| Extension to 160MHz signal analysis bandwidth, for R&S®FSV30 and R&S®FSV40, not for FSV40 model .39 retrofittable in Rohde & Schwarz service (hardware option) | |
| Rack mount kit, preinstalled ex factory; for R&S®FSV/FSVR, excludes R&S®FSV-B1 (hardware option) | |
| Analog modulation analysis for AM, FM, PM | |
| FM stereo measurement application, measurement of L, R, M, S and pilot dev, Crosstalk, THB, R&S®FSV-K7 required (software license) | |
| Bluetooth/EDR measurement application (software license) | |
| Power sensor measurement with NRP power sensors | |
| Analysis of GSM, EDGE and EDGE evolution signals | |
| Spectrogram measurement application | |
| Noise figure and gain measurements (Preamplifier R&S®FSV-B22 or R&S®FSV-B24 required) | |
| Phase noise measurement application | |
| EMI application for diagnostic of RF interference with spectrum analyzers R&S®FSV and real-time spectrum analyzers R&S®FSVR, (software license) | |
| Vector signal analysis application for modulation analysis of digital modulated single carrier signals (software license) | |
| Analysis of 3GPP-FDD base station signals incl. HSPA+ | |
| 3GPP-FDD UE analysis incl. HSPA | |
| 3GPP TD-SCDMA BTS measurements application | |
| 3GPP TD-SCDMA UE measurement application | |
| Analysis of CDMA2000 base station signals | |
| CDMA2000 MS measurement application (software license) | |
| Analysis of 1xEV-DO base station signals | |
| 1xEV-DO MS measurement application (software license) | |
| Analysis of WLAN 802.11a,b,g,j signals | |
| Extension of R&S®FSV-K91 to 802.11n (R&S®FSV-K91 required) | |
| Analysis of WIMAX™ 802.16 SISO signals | |
| Analysis of EUTRA/LTE FDD downlink signals | |
| Analysis of EUTRA/LTE FDD uplink signals | |
| EUTRA/LTE Downlink MIMO measurement application (R&S®FSV-K100 or R&S®FSV-K104 required) | |
| EUTRA/LTE uplink MIMO, PC software for R&S®FSV (R&S®FSV-K101 or -K105 required) (software license) | |
| Analysis of EUTRA/LTE TDD downlink signals (software license) | |
| Analysis of EUTRA/LTE TDD uplink signals | |
| 3GPP 5G-NR downlink Measurement Application IQ bandwidth > 100 MHz and 4 GB RAM required (software license) | |
| Microwave preselector bypass for wideband demodulation above 7 GHz, only for R&S®FSVA30 (hardware option) | |
| Extension of the 3 year standard product warranty to 4 years for FSV30 w/o K54-Call: - All repairs and all necessary R&S®Manufacturer-Calibrations in case of repair | |
| Extension of the 3 year standard product warranty to 4 years for FSV30 with K54-Cal: - All repairs and all necessary R&S®Manufacturer-Calibrations in case of repair | |
| Extension of the 3 year standard product warranty to 5 years for FSV30 w/o K54-Call: - All repairs and all necessary R&S®Manufacturer-Calibrations in case of repair | |
| Extension of the 3 year standard product warranty to 5 years for FSV30 with K54-Cal: - All repairs and all necessary R&S®Manufacturer-Calibrations in case of repair |
Toont 1 - 5 van 5 resultaten
1
Signal and spectrum analyzer 10Hz to 30GHz, -154dBm to +30dBm, resolutionbandwidth 1Hz to 10MHz
Product-ID: P-604402
Huren
Bevestigd bij offerte
Offerte
Financiele Oplossingen
Vraag nu om meer informatie
2
Signal and spectrum analyzer 10Hz to 30GHz, -154dBm to +30dBm, resolutionbandwidth 1Hz to 10MHz
Product-ID: P-216924
Huren
Bevestigd bij offerte
Offerte
Financiele Oplossingen
Vraag nu om meer informatie
3
Signal and spectrum analyzer 10Hz to 30GHz, -154dBm to +30dBm, resolutionbandwidth 1Hz to 10MHz
Product-ID: P-436402
Huren
Bevestigd bij offerte
Offerte
Financiele Oplossingen
Vraag nu om meer informatie
4
Signal and spectrum analyzer 10Hz to 30GHz, -154dBm to +30dBm, resolutionbandwidth 1Hz to 10MHz
Product-ID: P-614508
Huren
Bevestigd bij offerte
Offerte
Financiele Oplossingen
Vraag nu om meer informatie
5
Signal and spectrum analyzer 10Hz to 30GHz, -154dBm to +30dBm, resolutionbandwidth 1Hz to 10MHz
Product-ID: P-216934
Huren
Bevestigd bij offerte
Offerte
Financiele Oplossingen
Vraag nu om meer informatie
Toont 1 - 5 van 5 resultaten
* Prijzen en beschikbaarheid kunnen zonder voorafgaande kennisgeving worden gewijzigd. Alle prijzen kunnen variëren als gevolg van verzendvoorwaarden, btw of omzetbelasting, invoerrechten en wisselkoersen. Producten zijn mogelijk niet op alle locaties beschikbaar. Alle vermelde besparingen zijn gebaseerd op de volledige catalogusprijs van nieuwe instrumenten; werkelijke besparingen kunnen variëren op basis van optie (s), configuratie, wisselkoersen en andere factoren. Garantie kan variëren per categorie of specifiek beschikbaar product. Alle voorwaarden worden bevestigd door volledige schriftelijke offerte.
Kunt u niet vinden wat u zoekt?
Contact opnemen
Alternatieve aanbevelingen
