Geconfigureerde modellen bevatten de volgende opties:
RF & Microwave Spectrum AnalyzersSpectrum Analyzers-Hand HeldGebruikt u alstublieft "krijg snel een offerte" , en we zullen u contacteren en een offerte maken voor u.
U kunt ook neem contact op als je dat liever hebt, en onze experts zullen u begeleiden met de juiste applicatie en inkoop oplossing voor dit product.
Het spijt ons, maar we hebben op dit moment geen informatie over belangrijke specificaties voor dit product beschikbaar online.
U kunt voor meer informatie contact opnemen met ons en een van onze medewerkers is u dan graag van dienst.
Anritsu’s Field Master MS2080A 4 GHz RF Spectrum Analyzer is designed to offer the performance you need with the toughness required in a field portable instrument. Developed with 20 years’ experience of designing RF test instruments for field technicians, the Field Master MS2080A integrates a spectrum analyzer, real-time spectrum analyzer (RTSA), cable and antenna analyzer, and LTE/5G base station tester into a single battery powered instrument.
The MS2080A builds on Anritsu’s pioneering history of developing reliable and dependable instruments for the world’s most demanding RF measurements in the toughest environments. Weighing less than 9 pounds (4 kg), the MS2080A is small, compact, and easy to carry.
When hunting for interfering RF signals in the field, MS2080A offers a wide range of features to identify and locate the source. A fast sweep speed of 45 GHz/s coupled with AM/FM demod and RF source geolocation help pinpoint the position of interfering signals fast. The optional real-time spectrum analyzer captures even the shortest of bursted or TDD signals and the addition of the S331P Site Master enables cable and antenna line sweep measurements on the same instrument.
LTE and 5G base station measurement options support operators and contractors perform the essential measurements when installing or optimizing the network.
For use on the bench, the hard case with rubberized easy grip bumpers and integrated kick stand makes the MS2080A an ideal instrument for general purpose lab measurements where portability and space are at a premium.
Key Features |
Spectrum Analyzer |
Real-Time Spectrum Analyzer (RTSA) |
Interference Analyzer |
True Power Meter |
Cable and Antenna Analyzer |
AM/FM Demodulator |
LTE FDD/TDD Analyzer |
5GNR FR1 Analyzer |
Coverage Mapping |
Benefits | |
Interference Hunting and Spectrum Clearing | fast sweep speeds a low distortion front-end and the Real Time spectrum analyzer combine to quickly identify interfering signals. A special interference finder option adds AM/FM demodulation with audio output plus interfering source triangulation on a digital map to pinpoint and identify the location and source of interference. |
Broadcast Transmitter Analysis | a comprehensive range of transmitter measurements; including: harmonic, spurious, occupied bandwidth, channel power, and adjacent channel power – ensures conformity to regulatory requirements |
5GNR Base Station Measurement | validate the performance of the gNB base station with essential measurements that are in full compliance with 3GPP TS 38.104 V15. including: ▪ frequency error ▪ time offset ▪ cell/sector ID ▪ SSB: RSRP, RSRQ, SINR, RSSI ▪ modulation quality EVM ▪ unwanted emissions ▪ occupied bandwidth ▪ adjacent channel leakage ratio ▪ transmitter harmonics and spurious ▪ EIRP |
5G/LTE Coverage Mapping | receive a clear representation of the signal strength of 5G/LTE transmitters over intended geographic area by continuously measuring RF data – including RSRP, RSRQ, SINR, channel power – with results graphically displayed on a digital map or building floor plan. |
Cable and Antenna Measurements | Line sweep RF cables and antennas at base station locations with accessory S331P Site Master |
Specifications | |
MS2080A Field Master | |
Feature | Parameter |
Frequency Range | 9 kHz to 4 GHz |
Sweep Speed | 45 GHz/s |
Phase Noise | -95 dBc/Hz @ 1 GHz freq and 100 kHz offset |
DANL | < -165 dBm (with pre amp) |
Maximum Input Signal | +30 dBm |
Dynamic Range | >105 dB minimum at 2.4 GHz, 2/3 (TOI-DANL) in 1 Hz RBW |
Amplitude Range | DANL to +30 dBm |
Input Damage Level | 5 Watts |
Frequency Accuracy | Aging: ±1.0 x 10–6 per 10 years Accuracy: ±0.28 x 10–6 (-10 °C ± 55°C) plus aging |
Amplitude Accuracy | ±1 dB (± 0.5 dB typical) |
Resolution Bandwidth in Sweep Mode | 1 Hz to 5 MHz |
Resolution Bandwidth in Zero Span | 10 Hz to 20 MHz |
RTSA Bandwidth | 40 MHz |
Demodulation | 5GNR base station, LTE base station |
Specifications | |
MS2080A Field Master | |
Model Overview | |
Model | Description |
MS2080A | Field Master Spectrum Analyzer (Requires Option 704) |
Options | |
MS2080A-0704 | 9 kHz to 4 GHz Spectrum Analyzer |
MS2080A-0019* | High Accuracy Power Meter (requires compatible USB power sensor, sold separately) |
MS2080A-0024* | Interference Finder (requires directional antenna, sold separately) |
MS2080A-0031* | GPS Receiver (requires GPS antenna, sold separately) |
MS2080A-0090* | Gated Sweep |
MS2080A-0102* | 40 MHz Analysis Bandwidth (20 MHz standard) |
MS2080A-0199* | Real-Time Spectrum Analyzer |
MS2080A-0431* | Coverage Mapping (requires GPS option MS2080A-0031) |
MS2080A-0883* | LTE FDD/TDD Signal Analyzer |
MS2080A-0888* | 5GNR FDD/TDD FR1 Measurements (requires GPS option MS2080A-0031) |
MS2080A-0704-0097 | Accredited Calibration to ISO17025 and ANSI/NCSL Z540-1 |
MS2080A-0704-0098 | Standard Calibration to ISO17025 and ANSI/NCSL Z540-1 |
MS2080A-0704-0099 | Premium Calibration to ISO17025 and ANSI/NCSL Z540-1 plus test data |
Note:
* Time-Limited Options
Options marked with an asterisk are offered as a 90-day time limited option by ordering as a -9xxx series option. For example, MS2080A-9888 is the 90-day time limited option for 5GNR FDD/TDD FR1 Measurements. The option start time begins when the user first activates the option. Refer to the instrument user guide for information on purchasing and activating time limited options.