You are browsing the BE_NL site. Would you like to be redirected to another country or region to see content and products specific to your location?

Snelle Offerte: Rohde & Schwarz FSWP26 (1322.8003.26)

Rohde & Schwarz FSWP26 (1322.8003.26)

Phase Noise Analyzer; 1 MHz to 26.5 GHz
Model
FSWP26 (1322.8003.26)
Productgroep
RF & Microwave Power
Fabrikant
Rohde & Schwarz

Geconfigureerde modellen bevatten de volgende opties:

RF & Microwave PowerNoise & OtherNoise Test Sets
Configuraties
Belangrijke specificaties
Productoverzicht
Hulpbronnen

Kies uw configuratie

Show:

Beschikbare opties voor Rohde & Schwarz FSWP26 (1322.8003.26)

Optie-IDBeschrijving
Signal and spectrum analyzer 10 Hz to 26 GHz for R&S®FSWP26 (hardware option, retrofittable in factory)
High stability OCXO
Resolution BW >10MHz
Resolution bandwidth up to 80 MHz, 20 MHz and 50 MHz additionally, for R&S FSWP8 and R&S FSWP26, option R&S FSWP-B1 required (hardware option)
External generator control Retrofittable in Rohde&Schwarz service (hardware option)
High pass filter improved dynamic range for measurement of harmonics, suppression of fundamental signals from 300 MHz to 1.8 GHz, option R&S®FSWP-B1 required (software license)
Solid state drive, 64 GB with analyzer firmware for exchange against standard SSD for instruments with IPC11 CPU board (hardware option)
Support for harmonic mixers, includes LO/IF ports for external mixers for R&S®FSWP for x-corr option FSWP-B64 required (hardware option)
RF Preamplifier, 20 dB 100 kHz to 26 GHz for R&S®FSWP26 option R&S®FSWP-B1 required (hardware option)
Cross correlation
Cross correlation for phase noise analyzer R&S FSWP26 from 1 MHz to 26 GHz (hardware option)
Cross correlation for phase noise analyzer R&S®FSWP26 from 1MHz to 26GHz Low phase noise, includes R&S®FSWP-B4, excludes option R&S®FSWP-B60 (hardware option)
Signal source for additiv
Signal source for additive phase noise measurement, model dependent 10 MHz to max. 18 GHz, 0.1 dB steps
Extension to 80 MHz signal analysis bandwidth, includes microwave preselector bypass option R&S®FSWP-B1 required (software license)
Extension to 320 MHz signal analysis bandwidth (retrofit in service) (hardware option)
All software options active
Measurement application for pulsed phase noise and additive pulsed phase noise (software license)
Pulse measurement application R&S®FSWP-B1 required (software license)
Pulse stability measureme
Time Sidelobe Measurment
Modulation analysis application for modulation analysis of analog (AM, FM, PM) modulated single carrier signals, R&S®FSWP-B1 required (software license)
Noise figure measurement application noise source required, R&S®FSWP-B1 required Preamplifier R&S®FSWP-B24 recommended (software license)
Security Write Protection
Measurement application for detection and display of low level spurious signals (software license)
Transient measurement application (software license)
Chirp analysis extension
Hopping analsis extension
Vector signal analysis for modulation analysis on digital modulated single carrier signals R&S®FSWP-B1 required (software license)
Upgrade of internal signal source for additive phase noise meas.
Windows 10

Toont 1 - 6 van 34 resultaten

1
2
6
1

Phase noise analyzer and VCO tester 1 MHz to 26.5 GHz optionally with cross correlation and spectrum

Product-ID: P-605572

FSWP-B24 (1325.3725.26) • RF Preamplifier, 20 dB 100 kHz to 26 GHz for R&S®FSWP26 option R&S®FSWP-B1 required (hardware option)FSWP-B64 (1322.9900.27) • Signal source for additive phase noise measurement, model dependent 10 MHz to max. 18 GHz, 0.1 dB stepsFSWP-B8 (1325.5028.26) • Resolution bandwidth up to 80 MHz, 20 MHz and 50 MHz additionally, for R&S FSWP8 and R&S FSWP26, option R&S FSWP-B1 required (hardware option)FSWP-B4 (1325.3890.02) • High stability OCXOFSWP-B60 (1322.9800.26) • Cross correlation for phase noise analyzer R&S FSWP26 from 1 MHz to 26 GHz (hardware option)FSWP-B1 (1322.9997.26) • Signal and spectrum analyzer 10 Hz to 26 GHz for R&S®FSWP26 (hardware option, retrofittable in factory)
Huren

Bevestigd bij offerte

Offerte

Gebruikt

Beschikbaarheid wordt op de offerte vermeld

Inlichtingen

Financiele Oplossingen

Vraag nu om meer informatie

2

Phase noise analyzer and VCO tester 1 MHz to 26.5 GHz optionally with cross correlation and spectrum

Product-ID: P-605556

FSWP-B24 (1325.3725.26) • RF Preamplifier, 20 dB 100 kHz to 26 GHz for R&S®FSWP26 option R&S®FSWP-B1 required (hardware option)FSWP-B61 (1325.3719.26) • Cross correlation for phase noise analyzer R&S®FSWP26 from 1MHz to 26GHz Low phase noise, includes R&S®FSWP-B4, excludes option R&S®FSWP-B60 (hardware option)FSWP-B1 (1322.9997.26) • Signal and spectrum analyzer 10 Hz to 26 GHz for R&S®FSWP26 (hardware option, retrofittable in factory)FSWP-B8 (1325.5028.26) • Resolution bandwidth up to 80 MHz, 20 MHz and 50 MHz additionally, for R&S FSWP8 and R&S FSWP26, option R&S FSWP-B1 required (hardware option)FSWP-B64 (1322.9900.27) • Signal source for additive phase noise measurement, model dependent 10 MHz to max. 18 GHz, 0.1 dB steps
Huren

Bevestigd bij offerte

Offerte

Gebruikt

Beschikbaarheid wordt op de offerte vermeld

Inlichtingen

Financiele Oplossingen

Vraag nu om meer informatie

3

Phase noise analyzer and VCO tester 1 MHz to 26.5 GHz optionally with cross correlation and spectrum

Product-ID: P-605601

FSWP-B4 (1325.3890.02) • High stability OCXOFSWP-K4 (1325.5034.02) • Measurement application for pulsed phase noise and additive pulsed phase noise (software license)FSWP-B60 (1322.9800.08) • Cross correlationFSWP-B1 (1322.9997.26) • Signal and spectrum analyzer 10 Hz to 26 GHz for R&S®FSWP26 (hardware option, retrofittable in factory)FSWP-B64 (1322.9900.27) • Signal source for additive phase noise measurement, model dependent 10 MHz to max. 18 GHz, 0.1 dB steps
Huren

Bevestigd bij offerte

Offerte

Gebruikt

Beschikbaarheid wordt op de offerte vermeld

Inlichtingen

Financiele Oplossingen

Vraag nu om meer informatie

4

Phase noise analyzer and VCO tester 1 MHz to 26.5 GHz optionally with cross correlation and spectrum

Product-ID: P-607787

FSWP-B80 (1325.4338.02) • Extension to 80 MHz signal analysis bandwidth, includes microwave preselector bypass option R&S®FSWP-B1 required (software license)FSWP-B64 (1322.9900.27) • Signal source for additive phase noise measurement, model dependent 10 MHz to max. 18 GHz, 0.1 dB stepsFSWP-B18 (1331.4313.02) • Solid state drive, 64 GB with analyzer firmware for exchange against standard SSD for instruments with IPC11 CPU board (hardware option)FSWP-K70 (1325.4280.02) • Vector signal analysis for modulation analysis on digital modulated single carrier signals R&S®FSWP-B1 required (software license)FSWP-B1 (1322.9997.26) • Signal and spectrum analyzer 10 Hz to 26 GHz for R&S®FSWP26 (hardware option, retrofittable in factory)FSWP-K6 (1325.4221.02) • Pulse measurement application R&S®FSWP-B1 required (software license)
Huren

Bevestigd bij offerte

Offerte

Gebruikt

Beschikbaarheid wordt op de offerte vermeld

Inlichtingen

Financiele Oplossingen

Vraag nu om meer informatie

5

Phase noise analyzer and VCO tester 1 MHz to 26.5 GHz optionally with cross correlation and spectrum

Product-ID: P-245911

FSWP-K70 (1325.4280.02) • Vector signal analysis for modulation analysis on digital modulated single carrier signals R&S®FSWP-B1 required (software license)FSWP-K60H (1338.4548.02) • Hopping analsis extensionFSWP-K60 (1338.4525.02) • Transient measurement application (software license)FSWP-K4 (1325.5034.02) • Measurement application for pulsed phase noise and additive pulsed phase noise (software license)FSWP-B320 (1338.3235.04) • Extension to 320 MHz signal analysis bandwidth (retrofit in service) (hardware option)FSWP-B10 (1325.5463.02) • External generator control Retrofittable in Rohde&Schwarz service (hardware option)
Huren

Bevestigd bij offerte

Offerte

Gebruikt

Beschikbaarheid wordt op de offerte vermeld

Inlichtingen

Financiele Oplossingen

Vraag nu om meer informatie

6

Phase noise analyzer and VCO tester 1 MHz to 26.5 GHz optionally with cross correlation and spectrum

Product-ID: P-366356

FSWP-B1 (1322.9997.26) • Signal and spectrum analyzer 10 Hz to 26 GHz for R&S®FSWP26 (hardware option, retrofittable in factory)FSWP-B24 (1325.3725.26) • RF Preamplifier, 20 dB 100 kHz to 26 GHz for R&S®FSWP26 option R&S®FSWP-B1 required (hardware option)FSWP-B21 (1325.3848.02) • Support for harmonic mixers, includes LO/IF ports for external mixers for R&S®FSWP for x-corr option FSWP-B64 required (hardware option)FSWP-B8 (1325.5028.26) • Resolution bandwidth up to 80 MHz, 20 MHz and 50 MHz additionally, for R&S FSWP8 and R&S FSWP26, option R&S FSWP-B1 required (hardware option)FSWP-B4 (1325.3890.02) • High stability OCXOFSWP-B60 (1322.9800.26) • Cross correlation for phase noise analyzer R&S FSWP26 from 1 MHz to 26 GHz (hardware option)
Huren

Bevestigd bij offerte

Offerte

Gebruikt

Beschikbaarheid wordt op de offerte vermeld

Inlichtingen

Financiele Oplossingen

Vraag nu om meer informatie

Toont 1 - 6 van 34 resultaten

1
2
6
* Prijzen en beschikbaarheid kunnen zonder voorafgaande kennisgeving worden gewijzigd. Alle prijzen kunnen variëren als gevolg van verzendvoorwaarden, btw of omzetbelasting, invoerrechten en wisselkoersen. Producten zijn mogelijk niet op alle locaties beschikbaar. Alle vermelde besparingen zijn gebaseerd op de volledige catalogusprijs van nieuwe instrumenten; werkelijke besparingen kunnen variëren op basis van optie (s), configuratie, wisselkoersen en andere factoren. Garantie kan variëren per categorie of specifiek beschikbaar product. Alle voorwaarden worden bevestigd door volledige schriftelijke offerte.

Kunt u niet vinden wat u zoekt?

Contact opnemen
Kunt u niet vinden wat u zoekt?
loader
loader logo