The PNA-X network analyzer is the world´s most integrated and flexible single-connection microwave test engine for measuring active devices such as amplifiers, mixers, and frequency converters. You can choose from five frequency models to meet your specific device test needs: 13.5, 26.5, 43.5, 50, and 67 GHz. The PNA-X provides unrivaled configurability with a built-in second source, combiner, and internal signal-routing switches.
Key Features:
- 10 MHz to 43.5 GHz
- 2- or 4-ports with two built-in sources
- 126 dB system and 129 receiver dynamic range, 32,001 points, 200 channels, 15 MHz IF bandwidth
- High output power (+18 dBm), low harmonics (-60 dBc) and a wide power sweep range (38 dB)
- Best dynamic accuracy: 0.1 dB compression with +15 dBm input power at the receiver
- Low noise floor of -111 dBm at 10 Hz IF bandwidth
Specifications: |
|
Maximum Frequency | 43.5 GHZ |
Dynamic Range | 124 dB |
Output Power | 13 dBm |
Number of Built-In Ports | 2 or 4 ports |
Harmonics | -60 dBc |
Network Analyzer Series | PNA-X |
Applications:
- S-parameters (CW and pulsed)
- Noise figure
- Gain compression
- Intermodulation and harmonic distortion
- Conversion gain/loss
- True-differential stimulus
- Millimeter-wave
- Nonlinear waveform and X-parameter® characterization
- Antenna test