You are browsing the BE_FR site. Would you like to be redirected to another country or region to see content and products specific to your location?

Devis Rapide: Rohde & Schwarz FSWP26 (1322.8003.26)

Rohde & Schwarz FSWP26 (1322.8003.26)

Phase Noise Analyzer; 1 MHz to 26.5 GHz
Modèle
FSWP26 (1322.8003.26)
Gamme de produits
RF & Microwave Power
Fabricant
Rohde & Schwarz

Cette configuration a les caractéristiques suivantes:

RF & Microwave PowerNoise & OtherNoise Test Sets
Configurations
Caractéristiques principales
Description produit
Ressources

Choisissez votre configuration

Show:

Options disponibles pour Rohde & Schwarz FSWP26 (1322.8003.26)

OptionDescription
Signal and spectrum analyzer 10 Hz to 26 GHz for R&S®FSWP26 (hardware option, retrofittable in factory)
High stability OCXO
Resolution BW >10MHz
Resolution bandwidth up to 80 MHz, 20 MHz and 50 MHz additionally, for R&S FSWP8 and R&S FSWP26, option R&S FSWP-B1 required (hardware option)
External generator control Retrofittable in Rohde&Schwarz service (hardware option)
High pass filter improved dynamic range for measurement of harmonics, suppression of fundamental signals from 300 MHz to 1.8 GHz, option R&S®FSWP-B1 required (software license)
Solid state drive, 64 GB with analyzer firmware for exchange against standard SSD for instruments with IPC11 CPU board (hardware option)
Support for harmonic mixers, includes LO/IF ports for external mixers for R&S®FSWP for x-corr option FSWP-B64 required (hardware option)
RF Preamplifier, 20 dB 100 kHz to 26 GHz for R&S®FSWP26 option R&S®FSWP-B1 required (hardware option)
Cross correlation
Cross correlation for phase noise analyzer R&S FSWP26 from 1 MHz to 26 GHz (hardware option)
Cross correlation for phase noise analyzer R&S®FSWP26 from 1MHz to 26GHz Low phase noise, includes R&S®FSWP-B4, excludes option R&S®FSWP-B60 (hardware option)
Signal source for additiv
Signal source for additive phase noise measurement, model dependent 10 MHz to max. 18 GHz, 0.1 dB steps
Extension to 80 MHz signal analysis bandwidth, includes microwave preselector bypass option R&S®FSWP-B1 required (software license)
Extension to 320 MHz signal analysis bandwidth (retrofit in service) (hardware option)
All software options active
Measurement application for pulsed phase noise and additive pulsed phase noise (software license)
Pulse measurement application R&S®FSWP-B1 required (software license)
Pulse stability measureme
Time Sidelobe Measurment
Modulation analysis application for modulation analysis of analog (AM, FM, PM) modulated single carrier signals, R&S®FSWP-B1 required (software license)
Noise figure measurement application noise source required, R&S®FSWP-B1 required Preamplifier R&S®FSWP-B24 recommended (software license)
Security Write Protection
Measurement application for detection and display of low level spurious signals (software license)
Transient measurement application (software license)
Chirp analysis extension
Hopping analsis extension
Vector signal analysis for modulation analysis on digital modulated single carrier signals R&S®FSWP-B1 required (software license)
Upgrade of internal signal source for additive phase noise meas.
Windows 10

Affiché(s) 1 - 6 de 34 résultats

1
2
6
1

Phase noise analyzer and VCO tester 1 MHz to 26.5 GHz optionally with cross correlation and spectrum

ID de produit: P-605572

FSWP-B24 (1325.3725.26) • RF Preamplifier, 20 dB 100 kHz to 26 GHz for R&S®FSWP26 option R&S®FSWP-B1 required (hardware option)FSWP-B64 (1322.9900.27) • Signal source for additive phase noise measurement, model dependent 10 MHz to max. 18 GHz, 0.1 dB stepsFSWP-B8 (1325.5028.26) • Resolution bandwidth up to 80 MHz, 20 MHz and 50 MHz additionally, for R&S FSWP8 and R&S FSWP26, option R&S FSWP-B1 required (hardware option)FSWP-B4 (1325.3890.02) • High stability OCXOFSWP-B60 (1322.9800.26) • Cross correlation for phase noise analyzer R&S FSWP26 from 1 MHz to 26 GHz (hardware option)FSWP-B1 (1322.9997.26) • Signal and spectrum analyzer 10 Hz to 26 GHz for R&S®FSWP26 (hardware option, retrofittable in factory)
Location

Confirmé sur le devis

Devis

Occasion

Disponibilité confirmée sur devis

Effectuer une demande

Solutions Financières

Renseignez-vous maintenant pour en savoir plus

2

Phase noise analyzer and VCO tester 1 MHz to 26.5 GHz optionally with cross correlation and spectrum

ID de produit: P-605556

FSWP-B24 (1325.3725.26) • RF Preamplifier, 20 dB 100 kHz to 26 GHz for R&S®FSWP26 option R&S®FSWP-B1 required (hardware option)FSWP-B64 (1322.9900.27) • Signal source for additive phase noise measurement, model dependent 10 MHz to max. 18 GHz, 0.1 dB stepsFSWP-B61 (1325.3719.26) • Cross correlation for phase noise analyzer R&S®FSWP26 from 1MHz to 26GHz Low phase noise, includes R&S®FSWP-B4, excludes option R&S®FSWP-B60 (hardware option)FSWP-B1 (1322.9997.26) • Signal and spectrum analyzer 10 Hz to 26 GHz for R&S®FSWP26 (hardware option, retrofittable in factory)FSWP-B8 (1325.5028.26) • Resolution bandwidth up to 80 MHz, 20 MHz and 50 MHz additionally, for R&S FSWP8 and R&S FSWP26, option R&S FSWP-B1 required (hardware option)
Location

Confirmé sur le devis

Devis

Occasion

Disponibilité confirmée sur devis

Effectuer une demande

Solutions Financières

Renseignez-vous maintenant pour en savoir plus

3

Phase noise analyzer and VCO tester 1 MHz to 26.5 GHz optionally with cross correlation and spectrum

ID de produit: P-605601

FSWP-B4 (1325.3890.02) • High stability OCXOFSWP-K4 (1325.5034.02) • Measurement application for pulsed phase noise and additive pulsed phase noise (software license)FSWP-B60 (1322.9800.08) • Cross correlationFSWP-B1 (1322.9997.26) • Signal and spectrum analyzer 10 Hz to 26 GHz for R&S®FSWP26 (hardware option, retrofittable in factory)FSWP-B64 (1322.9900.27) • Signal source for additive phase noise measurement, model dependent 10 MHz to max. 18 GHz, 0.1 dB steps
Location

Confirmé sur le devis

Devis

Occasion

Disponibilité confirmée sur devis

Effectuer une demande

Solutions Financières

Renseignez-vous maintenant pour en savoir plus

4

Phase noise analyzer and VCO tester 1 MHz to 26.5 GHz optionally with cross correlation and spectrum

ID de produit: P-607787

FSWP-B80 (1325.4338.02) • Extension to 80 MHz signal analysis bandwidth, includes microwave preselector bypass option R&S®FSWP-B1 required (software license)FSWP-K4 (1325.5034.02) • Measurement application for pulsed phase noise and additive pulsed phase noise (software license)FSWP-K7 (1325.4238.02) • Modulation analysis application for modulation analysis of analog (AM, FM, PM) modulated single carrier signals, R&S®FSWP-B1 required (software license)FSWP-B64 (1322.9900.27) • Signal source for additive phase noise measurement, model dependent 10 MHz to max. 18 GHz, 0.1 dB stepsFSWP-B18 (1331.4313.02) • Solid state drive, 64 GB with analyzer firmware for exchange against standard SSD for instruments with IPC11 CPU board (hardware option)FSWP-K70 (1325.4280.02) • Vector signal analysis for modulation analysis on digital modulated single carrier signals R&S®FSWP-B1 required (software license)
Location

Confirmé sur le devis

Devis

Occasion

Disponibilité confirmée sur devis

Effectuer une demande

Solutions Financières

Renseignez-vous maintenant pour en savoir plus

5

Phase noise analyzer and VCO tester 1 MHz to 26.5 GHz optionally with cross correlation and spectrum

ID de produit: P-245911

FSWP-K70 (1325.4280.02) • Vector signal analysis for modulation analysis on digital modulated single carrier signals R&S®FSWP-B1 required (software license)FSWP-K60H (1338.4548.02) • Hopping analsis extensionFSWP-K60 (1338.4525.02) • Transient measurement application (software license)FSWP-K4 (1325.5034.02) • Measurement application for pulsed phase noise and additive pulsed phase noise (software license)FSWP-B320 (1338.3235.04) • Extension to 320 MHz signal analysis bandwidth (retrofit in service) (hardware option)FSWP-B10 (1325.5463.02) • External generator control Retrofittable in Rohde&Schwarz service (hardware option)
Location

Confirmé sur le devis

Devis

Occasion

Disponibilité confirmée sur devis

Effectuer une demande

Solutions Financières

Renseignez-vous maintenant pour en savoir plus

6

Phase noise analyzer and VCO tester 1 MHz to 26.5 GHz optionally with cross correlation and spectrum

ID de produit: P-366356

FSWP-B1 (1322.9997.26) • Signal and spectrum analyzer 10 Hz to 26 GHz for R&S®FSWP26 (hardware option, retrofittable in factory)FSWP-B24 (1325.3725.26) • RF Preamplifier, 20 dB 100 kHz to 26 GHz for R&S®FSWP26 option R&S®FSWP-B1 required (hardware option)FSWP-B21 (1325.3848.02) • Support for harmonic mixers, includes LO/IF ports for external mixers for R&S®FSWP for x-corr option FSWP-B64 required (hardware option)FSWP-B8 (1325.5028.26) • Resolution bandwidth up to 80 MHz, 20 MHz and 50 MHz additionally, for R&S FSWP8 and R&S FSWP26, option R&S FSWP-B1 required (hardware option)FSWP-B4 (1325.3890.02) • High stability OCXOFSWP-B60 (1322.9800.26) • Cross correlation for phase noise analyzer R&S FSWP26 from 1 MHz to 26 GHz (hardware option)
Location

Confirmé sur le devis

Devis

Occasion

Disponibilité confirmée sur devis

Effectuer une demande

Solutions Financières

Renseignez-vous maintenant pour en savoir plus

Affiché(s) 1 - 6 de 34 résultats

1
2
6
* La disponibilité des produits et leurs prix sont sujets à des changements non-notifiés. Tous les prix peuvent varier en raison des coûts de transport, de la TVA, des taxes commerciales, des frais d'importation et du taux de change.Les produits ne sont pas nécessairement disponibles dans chaque pays. Chaque remise mentionnée est basée sur le prix liste complet de l'instrument neuf; les remises véritables peuvent varier en fonction des options, de la configuration, des taux de change et d'autres facteurs. La garantie peut varier selon la catégorie de produit ou selon le produit spécifié disponible. Toutes les conditions sont à confirmer par un devis rédigé complet.

Aucun résultat ne correspond à votre recherche ?

Nous contacter
Aucun résultat ne correspond à votre recherche ?
loader
loader logo