Cette configuration a les caractéristiques suivantes:
RF & Microwave PowerNoise & OtherNoise Test Sets| Option | Description |
|---|---|
| Signal and spectrum analyzer 10 Hz to 26 GHz for R&S®FSWP26 (hardware option, retrofittable in factory) | |
| High stability OCXO | |
| Resolution BW >10MHz | |
| Resolution bandwidth up to 80 MHz, 20 MHz and 50 MHz additionally, for R&S FSWP8 and R&S FSWP26, option R&S FSWP-B1 required (hardware option) | |
| External generator control Retrofittable in Rohde&Schwarz service (hardware option) | |
| High pass filter improved dynamic range for measurement of harmonics, suppression of fundamental signals from 300 MHz to 1.8 GHz, option R&S®FSWP-B1 required (software license) | |
| Solid state drive, 64 GB with analyzer firmware for exchange against standard SSD for instruments with IPC11 CPU board (hardware option) | |
| Support for harmonic mixers, includes LO/IF ports for external mixers for R&S®FSWP for x-corr option FSWP-B64 required (hardware option) | |
| RF Preamplifier, 20 dB 100 kHz to 26 GHz for R&S®FSWP26 option R&S®FSWP-B1 required (hardware option) | |
| Cross correlation | |
| Cross correlation for phase noise analyzer R&S FSWP26 from 1 MHz to 26 GHz (hardware option) | |
| Cross correlation for phase noise analyzer R&S®FSWP26 from 1MHz to 26GHz Low phase noise, includes R&S®FSWP-B4, excludes option R&S®FSWP-B60 (hardware option) | |
| Signal source for additiv | |
| Signal source for additive phase noise measurement, model dependent 10 MHz to max. 18 GHz, 0.1 dB steps | |
| Extension to 80 MHz signal analysis bandwidth, includes microwave preselector bypass option R&S®FSWP-B1 required (software license) | |
| Extension to 320 MHz signal analysis bandwidth (retrofit in service) (hardware option) | |
| All software options active | |
| Measurement application for pulsed phase noise and additive pulsed phase noise (software license) | |
| Pulse measurement application R&S®FSWP-B1 required (software license) | |
| Pulse stability measureme | |
| Time Sidelobe Measurment | |
| Modulation analysis application for modulation analysis of analog (AM, FM, PM) modulated single carrier signals, R&S®FSWP-B1 required (software license) | |
| Noise figure measurement application noise source required, R&S®FSWP-B1 required Preamplifier R&S®FSWP-B24 recommended (software license) | |
| Security Write Protection | |
| Measurement application for detection and display of low level spurious signals (software license) | |
| Transient measurement application (software license) | |
| Chirp analysis extension | |
| Hopping analsis extension | |
| Vector signal analysis for modulation analysis on digital modulated single carrier signals R&S®FSWP-B1 required (software license) | |
| Upgrade of internal signal source for additive phase noise meas. | |
| Windows 10 |
Affiché(s) 1 - 6 de 34 résultats
ID de produit: P-605585
Confirmé sur le devis
Devis
Renseignez-vous maintenant pour en savoir plus
ID de produit: P-607787
Confirmé sur le devis
Devis
Renseignez-vous maintenant pour en savoir plus
ID de produit: P-549256
Confirmé sur le devis
Devis
Renseignez-vous maintenant pour en savoir plus
ID de produit: P-605556
Confirmé sur le devis
Devis
Renseignez-vous maintenant pour en savoir plus
ID de produit: P-605599
Confirmé sur le devis
Devis
Renseignez-vous maintenant pour en savoir plus
ID de produit: P-605572
Confirmé sur le devis
Devis
Renseignez-vous maintenant pour en savoir plus
Affiché(s) 1 - 6 de 34 résultats


