Amplifier Research 50S1G6

The Amplifier Research 50S1G6 is a solid-state, Class A design, self-contained, air-cooled, broadband amplifier designed for applications where instantaneous bandwidth, high gain and linearity are required. The unit is designed for benchtop use,but can be removed from the cabinet for immediate equipment rack mounting.

Specifications:

RATED POWER OUTPUT: 50 watts minimum (0.76 GHz)

INPUT FOR RATED OUTPUT:1.0 milliwatt maximum

POWER OUTPUT @ 3dB COMPRESSSION

• Nominal: 65 watts
• Minimum: 50 watts

POWER OUTPUT @ 1dB COMPRESSION

• Nominal: 50 watts
• Minimum: 40 watts

SMALL SIGNAL GAIN FLATNESS: 1.5dB typical

• 2.5dB maximum

FREQUENCY RESPONSE:0.76 GHz instantaneously

GAIN (at maximum setting): 48dB minimum

GAIN ADJUSTMENT:  Continuous Range; 4096 steps remote):10dB minimum

INPUT IMPEDANCE:50 ohms, VSWR 2.0:1 maximum

OUTPUT IMPEDANCE:50 ohms, nominal

MISMATCH TOLERANCE*:100% of rated power without foldback. Will operate without damage or oscillation with any magnitude and phase of source and load impedance. 

THIRD ORDER INTERCEPT:56 dBm typical

NOISE FIGURE:10dB typical

HARMONIC DISTORTION: Minus 20dBc maximum at 40 watts, (1.06.0 GHz)

Minus 15 dBc typical at 40watts, (0.71.0 GHz)

SPURIOUS: Minus 73 dBc Typ.

PHASE LINEARITY:1.0 deg/100MHz, Typ

PRIMARY POWER (Selected Automatically): 90-132, 180-264 VAC; 50/60 Hz, single phase 525 watts maximum

CONNECTORS RF: Type N female

REMOTE INTERFACES: IEEE-488: 24 pin, RS-232: 9 pin Subminiature D, RS-232 (fiber optic): Type ST, USB 2.0:Type B, Ethernet: RJ-45

SAFETY INTERLOCK:15 pin Subminiature D

COOLING: Forced air (self contained fans)