You are browsing the BE_FR site. Would you like to be redirected to another country or region to see content and products specific to your location?
US
Devis Rapide: Keysight Technologies N9952A
Keysight Technologies N9952A
FieldFox Handheld Microwave Analyzer; 300 kHz to 50 GHz
Modèle
N9952AGamme de produits
RF & Microwave Network AnalyzersFabricant
Keysight TechnologiesCette configuration a les caractéristiques suivantes:
RF & Microwave Network AnalyzersNetwork Analyzers20GHz <= 50GHz100kHz <= 1MHz2.4mm-Male (Jack)HandheldConfigurations
Caractéristiques principales
Description produit
Ressources
Laissez-nous vous conseiller sur la configuration exacte
Cliquez sur 'Configurez votre produit' et nous vous contacterons pour vous adresser un devis conforme à votre besoin.
Vous pouvez cliquer sur Contactez-moi, si vous préférez, et nos experts vous guideront vers la bonne solution technique et financière.
Caractéristiques principales
Indique les critères de tri possibles. Voir le tableau de configuration.
| Attribut | Valeur |
|---|---|
| High Frequency (range) | 20GHz <= 50GHz |
| Low Frequency (range) | 100kHz <= 1MHz |
| Connector Type | 2.4mm-Male (Jack) |
| Form Factor | Handheld |
Description produit
A lightweight, durable, cable and antenna analyzer, spectrum analyzer, network analyzer, and more
FieldFox is equipped to handle routine maintenance, in-depth troubleshooting and anything in between. FieldFox delivers Keysight-quality measurements – wherever you need to go. Add FieldFox to your kit, and carry precision with you.
The microwave combination analyzer's base function is a cable and antenna analyzer and it can be configured to include a spectrum and network analyzer. FieldFox can be ordered with additional capabilities: power meter, independent signal generator, vector voltmeter, interference analyzer, variable DC source, built-in GPS receiver, and remote control using an iPad or iPhone.
The future is Ka band. Now, there’s a rugged, dependable handheld designed to deliver precise, lab-grade measurements up to 50 GHz. At only 7.1 lbs., it’s an all-in-one cable and antenna tester (CAT) + vector network analyzer (VNA) + spectrum analyzer and more. Which means, now you get comprehensive system performance insight at higher frequencies. Plus with easy upgrades and multiple configurations, you’ll be ready to go where no handheld has gone before — today and beyond.
| Key Features |
| 50 GHz max frequency |
| Carry industry’s first 50 GHz handheld µW analyzer: standard model includes cable and antenna analyzer |
| Expand capabilities with optional VNA, spectrum analyzer, built-in power meter, vector voltmeter, and more |
| Save time by measuring DTF and TDR in a single sweep |
| Simultaneously measure all four S-parameters |
| Make accurate SA measurements (± 0.5 dB) without needing warm-up |
| Easily measure average and pulse power with a USB sensor |
| Lightest all-in-one analyzer at only 7.1 lb. (3.2 kg)Full-band tracking generator |
| Independent signal source |
| Interference analyzer |
| Built-in power meter |
| Built-in GPS receiver |
| Built-in variable DC voltage source |
| Pulse measurements |
| Specifications | |
N9952A FieldFox Handheld Microwave Analyzer | |
| Features | Parameters |
| Maximum Frequency | 50 GHz |
| Minimum Frequency | 300 kHz |
| SA Start Frequency | 5 kHz |
| System Dynamic Range | 110 dB |
| Best Speed at 1001 Point, 1 Sweep | 478 us/pt |
| Output Power | 4 dBm |
| Trace Noise | 0.004 dB |
| Number of Built-In Ports | 2 ports |
| Instrument Type | Combination Analyzer |
| Cable and Antenna Analyzer | Yes - Standard |
| Spectrum Analyzer | Yes - Optional |
| Vector Network Analyzer | Yes - Optional |
| Additional CAT/VNA Based Features | Vector Voltmeter Mixed-Mode S-Parameters DTF/TDR Cable Measurements |
| Additional SA Based Features | Built-In Power Meter Extended Range Transmission Analysis (ERTA) Real-Time Spectrum Analysis Noise Figure Measurements Over-The-Air Measurements |
| System Features | Built-In DC Source GPS Receiver - Internal Only Remote Control Capability |
| Power Measurement Using USB Sensor | CW or Swept-Frequency Frequency-Offset RF Pulse Test with Peak Sensor |
| Standard Attenuator Range | 30 dB |
| Standard Attenuator Step | 5 dB |
| DANL @1 GHz | -159 dBm |
| Maximum Analysis Bandwidth | 10 MHz |
| Phase Noise @1 GHz (1 MHz offset) | -113 dBc/Hz |
| Phase Noise @1 GHz (10 kHz offset) | -111 dBc/Hz |
| Phase Noise @1 GHz (30 kHz offset) | -108 dBc/Hz |
| Spur Free Dynamic Range | > 104 dB |
| TOI @1 GHz (3rd Order Intercept) | +13 dBM |
| Applications Available | Yes |
| Maximum Real-Time Bandwidth | 10 MHz |
| Bandwidth Options | 10 MHz (standard) |
| Performance Level | ◆◆◆◇◇◇ |
| Applications-Cellular | 89600 VSA Software Over-The-Air LTE FDD and 5GTF |
| Applications-Digital Video | 89600 VSA Software |
| Applications-General Purpose | AM/FM Tune and Listen Field Strength Measurement SCPI Code Compatibility Spectrogram Stimulus Response |
| Applications-Wireless Connectivity | 89600 VSA Software |
| Specifications | |
| FieldFox Handheld Microwave Vector Network Analyzer | |
| Model Overview | |
| Model | Frequency Range |
| N9913A | 30 kHz to 4 GHz |
| N9914A | 30 kHz to 6.5 GHz |
| N9915A/N9925A | 30 kHz to 9 GHz |
| N9916A/N9926A | 30 kHz to 14 GHz |
| N9917A/N9927A | 30 kHz to 18 GHz |
| N9918A/N9928A | 30 kHz to 26.5 GHz |
| N995xA Frequency Overview | |
| N9950A | 300 kHz to 32 GHz |
| N9951A | 300 kHz to 44 GHz |
| N9952A | 300 kHz to 50 GHz |
| Specifications | |||||
| FieldFox Handheld Analyzers | |||||
| Model Overview | |||||
| Maximum Frequency | Combination Models (CAT + VNA + SA) | Combination Models (CAT + VNA + SA) | VNA Models | VNA Models | SA Models |
| 4 GHz | N9912A-104 | N9913A | N9923A-104 | ||
| 6/6.5 GHz | N9912A-106 (2) | N9914A (3) | N9923A-106 (2) | ||
| 9 GHz | N9915A | N9925A | N9935A | ||
| 14 GHz | N9916A | N9926A | N9936A | ||
| 18 GHz | N9917A | N9927A | N9937A | ||
| 26.5 GHz | N9918A | N9928A | N9938A | ||
| 32 GHz | N9950A | N9960A | |||
| 44 GHz | N9951A | N9961A | |||
| 50 GHz | N9952A | N9962A |
Notes:
(1). Also referred to as cable and antenna analyzer
(2). Maximum frequency is 6 GHz.
(3). Maximum frequency is 6.5 GHz
| Specifications | ||||
| FieldFox RF and Microwave | ||||
| Model Overview | ||||
| Model | Description | CAT and VNA Frequency | SA Frequency * | Test Port Connectors |
| N9913A | 4 GHz FieldFox RF analyzer | 30 kHz to 4 GHz | 100 kHz to 4 GHz | Type-N (f) |
| N9914A | 6.5 GHz FieldFox RF analyzer | 30 kHz to 6.5 GHz | 100 kHz to 6.5 GHz | Type-N (f) |
| N9915A | 9 GHz FieldFox microwave analyzer | 30 kHz to 9 GHz | 100 kHz to 9 GHz | Type-N (f) |
| N9916A | 14 GHz FieldFox microwave analyzer | 30 kHz to 14 GHz | 100 kHz to 14 GHz | Type-N (f) |
| N9917A | 18 GHz FieldFox microwave analyzer | 30 kHz to 18 GHz | 100 kHz to 18 GHz | Type-N (f) |
| N9918A | 26.5 GHz FieldFox microwave analyzer | 30 kHz to 26.5 GHz | 100 kHz to 26.5 GHz | 3.5 mm (m) |
| N9950A | 32 GHz FieldFox microwave analyzer | 300 kHz to 32 GHz | 9 kHz to 32 GHz | NMD 2.4 mm (m) |
| N9951A | 44 GHz FieldFox microwave analyzer | 300 kHz to 44 GHz | 9 kHz to 44 GHz | NMD 2.4 mm (m) |
| N9952A | 50 GHz FieldFox microwave analyzer | 300 kHz to 50 GHz | 9 kHz to 50 GHz | NMD 2.4 mm (m) |
Note:
* Useable to 5 kHz
Ressources
Ressources de fichiers
Keysight FieldFox Handheld Analyzers Configuration Guide
Keysight FieldFox A-Series Handheld Analyzers Technical Overview
Keysight FieldFox Handheld Analyzers Data Sheet
Keysight FieldFox Handheld Analyzers Selection Guide
Aucun résultat ne correspond à votre recherche ?
Nous contacter
