The Sorensen SGX Series represents the next generation of high power programmable DC power supplies. The SGX Series is designed for exceptional load transient response, low noise and the highest power density in the industry. With a full 15 kW available down to 20 V output in a 3U package the SGX leads the industry in power density. The power density is enhanced by a stylish front air intake allowing supplies to be stacked without any required clearance between units.
At the heart of the SGX series is a 5 kW power module. Depending on the output voltage, one to six modules can be configured in a single chassis to deliver 5 kW to 30 kW of power.
Combinations of these chassis can then be easily paralleled to achieve power levels up to 150 kW. Paralleled units operate like one single supply providing total system current.
| Key Features |
| High Power Density:Up to15 kW in 3U, 30k Wina 6U chassis |
| Wide Voltage Range: 0-10V up to 0-1000V, from 4 to 30 kW |
| Fast Load Transient Response: Protection from undesired voltage excursions |
| Low Ripple and Noise |
| Intuitive Touch Screen Display |
| Parallelable up to 150 kW |
| Sequencing: Free system controller&speedup test |
| Low audible noise: Temperature controlled variable speed fans |
| Benefits |
|
| Advanced Intelligent Control | The SGX Series is operated from the intuitive, easy-to-use front panel touch screen display.
Quickly access output programming parameters, measurements, sequencing, configuration and system settings from the touch screen interface.
Functions and parameters can be directly selected from the touch screen or by using the encoder selector button.
The control resolution is adjusted by a dynamic rate change algorithm that combines the benefits of precise control over small parameter changes with quick sweeps through the entire range.
Additionally, the instrument can be controlled via LXI Ethernet and RS232 standard control interfaces, as well as through the optional GPIB control interface
|
| Specifications |
|
| SGX Series |
|
| Model Number Overview |
|
| Feature | Model Number Description |
| Model | SGX |
| Voltage | SGX-??? * |
| kW | SGX???X 4 to 15kW
SGX???/ 20 to 30kW
|
| Current | SGX???-?-??? * |
| Input Voltage Options | SGX???????C (Input Voltage 187 / 242VAC, 3 Phase)
SGX???????D (Input Voltage 342 / 440VAC, 3Phase)
SGX???????E (Input Voltage 396 / 528VAC, 3Phase)
|
| Remote Control Options | SGX???????? - 0A (No Options)
SGX???????? - 1A (IEEE-488.2 + RS-232C (RS-232 comes standard on SGI))
SGX???????? - 1D (Isolated Analog Control)
SGX???????? - 2A (Combined Options 1A + 1D)
|
| Panel Options | SGX???????? - ??S (Standard)
SGX???????? - ??N (No Display)
|
| Process Options | SGX???????? - ???AA (No Options)
SGX???????? - ???AB (Certificate of Calibration to ANSI / NCSL Z540-1 (includes Test Data))
|
| Modifications | SGX???????? - ?????CV (400Hz AC input @ 208 VAC (does not carry CE, CSA or UL marks ) ( 6U only ) STD on 3U)
SGX???????? - ?????PF (Passive power factor correction to 0.9 (Only applicable to 40V, 60V to 800V. Included in 10V-30V, 50V and 1000V.))
|
| RoHS | SGX???????? - ???????R (Add an 'R' to the model number for RoHS compliant version. Leave blank if RoHS version is not required.) |
Note:
* For units with greater than 3 digits, Voltage/Current is represented in numeric format;
e.g., above “100” represents 100A. For units at 1000 and above, the voltage is represented by the format “XKX”, e.g, 1K2 = 1200V and 1K0 = 1000V
