You are browsing the BE_EN site. Would you like to be redirected to another country or region to see content and products specific to your location?

Quick quote: Rohde & Schwarz FSVA3044 (1330.5000.44)

Rohde & Schwarz FSVA3044 (1330.5000.44)

Signal and Spectrum Analyzer; 10 Hz to 44 GHz
Model
FSVA3044 (1330.5000.44)
Product Family
RF & Microwave Spectrum Analyzers
Manufacturer
Rohde & Schwarz

Configured models contain the following attributes:

RF & Microwave Spectrum AnalyzersSpectrum Analyzers-Performance20GHz <= 50GHzDC <= 1kHzBenchtop
Configurations
Key Specs
Product Overview
Resources

Choose your configuration

Show:

Available Options for Rohde & Schwarz FSVA3044 (1330.5000.44)

OptionDescription
R&S®Accredited Calibration for FSVA3044: - Accredited calibration certificate - ISO 17025 accredited and ISO 9001 certified, traceability to national/international standards - Measurement of complete product specifications with the same procedures as used in production, incl. measurement uncertainties/guardbanding - Documentation of calibration results upon receipt
Documentation of calibration values
Printout of DCV (additional, in combination with DCV-Option only)
Smart noise source 100 MHz to 40 GHz
Carrying handles at instrument sides (retrofittable by customer)
AM/FM demodulation audio output including speaker, plug for headphones and volume knob (retrofit in service, excludes FSV3-B21)
OCXO, precision frequency reference, aging per year: 0.1 ppm, temp. drift: 0.1 ppm (5 to 45°C) (retrofit in service)
Additional interfaces IF/Video out, trigger out, user port, GPIB, AUX-control for TTL-sync. with FSV3-B10 option (retrofit in service)
10 Gigabit Ethernet port at instrument back for instrument control (retrofit in service)
Control of external signal generators via LAN for use as tracking generator. D-Sub cable for TTL-synchronization not included. (software license)
Microwave preselector bypass for wide analysis bandwidths at center frequency > 7.5 GHz (software license)
Spare solid state drive (requires option FSV3-B20)
Removable hard drive at the instrument front panel. Includes SSD (1 pc). (retrofit in service)
RF Preamplifier, 30 dB 10 MHz to 43.5 GHz (retrofit in service)
Electronic attenuator, 0-25 dB in 1 dB steps, max. frequency 7.5 GHz (software license)
28V BNC connector for noise source control via instrument firmware (retrofittable in service)
USB mass memory write protection disables writing to USB nemory sticks (installation ex factory) (software license)
Extension to 40 MHz signal analysis bandwidth (software license)
CPU board with enhanced computing power and memory size for fast analysis of complex digital modulation schemes (retrofit in service)
CPU board with enhanced computing power and memory size for fast analysis of complex digital modulation schemes for the FSVA3000. (ex factory only)
200 MHz signal analysis bandwidth extension (retrofittable in service)
Analog base band inputs, analysis bandwidth I only, Q only 200 MHz, I + jQ 400 MHz Supports IQ Analyzer and FSV3-K91 (WLAN) (FSV3-B200, B400, B600 or B1000 required) (retrofit in service)
400 MHz signal analysis bandwidth extension (retrofittable in service)
Pulse measurement application (software license)
Modulation Analysis Application for Analog (AM, FM, PM) Modulated Single Carrier Signals (software license)
Measurements with NRP Power Sensors (software license)
GSM measurement application GSM, EDGE, EDGE Evolution and VAMOS (software license)
Power Amplifier and Envelope Tracking Measurement Application (software license)
Direct DPD Measurement Application (R&S®FSV3-K18 Required) (software license)
Frequency response measurement application Requires R&S®FSV3-K18 (software license)
Noise Figure and Gain Measurement Application (Noise Source Required, Preamplifier R&S®FSV3-B24 recommended, option R&S®FSV3-B28V required for noise sources with BNC power connector) (software license)
Security Write Protection for Internal Solid State Drive (software license)
Phase Noise Measurement Application (software license)
Vector Signal Analysis Application for Modulation Analysis on Digital Modulated Single Carrier Signals (software license)
Vector Signal Analysis Application for Modulation Analysis of Signals with Multiple Modulations (R&S®FSV3-K70 Required) (software license)
BER Measurement Application with PRBS Data (R&S®FSV3-K70 Required) (software license)
3GPP FDD (WCDMA) BS Measurement Application, Incl. HSDPA and HSDPA+ (software license)
3GPP FDD (WCDMA) MS Measurement Application, Incl. HSUPA and HSUPA+ (software license)
WLAN 802.11a/b/g Measurement Application (software license)
WLAN 802.11ac Measurement Application (R&S®FSV3-K91 Required) (software license)
WLAN 802.11ax Measurement Application (R&S®FSV3-K91 Required) (software license)
WLAN 802.11n Measurement Application (R&S®FSV3-K91 Required) (software license)
WLAN 802.11p Measurement Application (R&S®FSV3-K91 Required) (software license)
EUTRA/LTE FDD Downlink Measurement Application (software license)
EUTRA/LTE FDD Uplink Measurement Application (software license)
EUTRA/LTE Advanced Downlink Measurement Application (FSV3-K100 or -K104 Required) (software license)
EUTRA/LTE Advanced Uplink Measurement Application (FSV3-K100 or -K104 Required) (software license)
EUTRA/LTE TDD Downlink Measurement Application (software license)
EUTRA/LTE TDD Uplink Measurement Application (software license)
EUTRA/LTE NB-IoT Downlink Measurement Application (software license)
3GPP 5G-NR Downlink Measurement Application (software license)
3GPP 5G-NR Uplink Measurement Application (software license)
3GPP 5G-NR combined DL ACLR/SEM/EVM measurements (FSV3-K144 option required)
5G NR R16 Extension for UL/DL (FSV3-K144 or FSV3-K145 option required)
User Defined Frequency Response Correction by SnP File in Touch Stone File Format. Corrects Frequency Response (Amplitude and Phase) of Measurement Setup. (software license)
Activates input up to 1280 MHz and output 640 MHz of frequency reference ports. For coupling of references of signal generator or DUT. (License Key)
Upgrade from 200 MHz to 400 MHz analysis bandwidth for FSVA3000 (software license)
Extension of the 3 year standard product warranty to 4 years for FSVA3044: - All repairs and all necessary R&S®Manufacturer-Calibrations in case of repair
Extension of the 3 year standard product warranty to 5 years for FSVA3044: - All repairs and all necessary R&S®Manufacturer-Calibrations in case of repair
19" adapter BW2010, cabinet 4HU 1/1

Showing 1 - 6 of 12 results

1
2
1

Signal and spectrum analyzer 10 Hz to 44 GHz, WXGA display, capacitive touchscreen, enhanced RF

Product ID: P-182570

FSV3-K40 (1330.5051.02) • Phase Noise Measurement Application (software license)ZZA-KN4 (1175.3033.00) • 19" adapter BW2010, cabinet 4HU 1/1FSV3-B114 (1330.4910.02) • CPU board with enhanced computing power and memory size for fast analysis of complex digital modulation schemes (retrofit in service)
Rent

Availability confirmed on quote

Quote

Used

Availability confirmed on quote

Inquire

Looking For New?

This product may be available by an alternative finance solution.

2

Signal and spectrum analyzer 10 Hz to 44 GHz, WXGA display, capacitive touchscreen, enhanced RF

Product ID: P-653249

FSV3-B271 (1330.4190.02) • Analog base band inputs, analysis bandwidth I only, Q only 200 MHz, I + jQ 400 MHz Supports IQ Analyzer and FSV3-K91 (WLAN) (FSV3-B200, B400, B600 or B1000 required) (retrofit in service)FSV3-B200 (1330.4132.02) • 200 MHz signal analysis bandwidth extension (retrofittable in service)FSV3-B114 (1330.4910.02) • CPU board with enhanced computing power and memory size for fast analysis of complex digital modulation schemes (retrofit in service)FSV3-B11 (1330.3865.02) • Microwave preselector bypass for wide analysis bandwidths at center frequency > 7.5 GHz (software license)FSV3-K40 (1330.5051.02) • Phase Noise Measurement Application (software license)
Rent

Availability confirmed on quote

Quote

Used

Availability confirmed on quote

Inquire

Looking For New?

This product may be available by an alternative finance solution.

3

Signal and spectrum analyzer 10 Hz to 44 GHz, WXGA display, capacitive touchscreen, enhanced RF

Product ID: P-379631

FSV3-K147 (1346.4250.02) • 3GPP 5G-NR combined DL ACLR/SEM/EVM measurements (FSV3-K144 option required)FSV3-K144 (1330.7219.02) • 3GPP 5G-NR Downlink Measurement Application (software license)FSV3-K145 (1330.7225.02) • 3GPP 5G-NR Uplink Measurement Application (software license)FSV3-B200 (1330.4132.02) • 200 MHz signal analysis bandwidth extension (retrofittable in service)FSV3-B114 (1330.4910.04) • CPU board with enhanced computing power and memory size for fast analysis of complex digital modulation schemes for the FSVA3000. (ex factory only)FSV3-K148 (1346.4914.02) • 5G NR R16 Extension for UL/DL (FSV3-K144 or FSV3-K145 option required)
Rent

Availability confirmed on quote

Quote

Used

Availability confirmed on quote

Inquire

Looking For New?

This product may be available by an alternative finance solution.

4

Signal and spectrum analyzer 10 Hz to 44 GHz, WXGA display, capacitive touchscreen, enhanced RF

Product ID: P-375079

FSV3-B24 (1330.4049.44) • RF Preamplifier, 30 dB 10 MHz to 43.5 GHz (retrofit in service)FSV3-K70 (1330.5074.02) • Vector Signal Analysis Application for Modulation Analysis on Digital Modulated Single Carrier Signals (software license)FSV3-K40 (1330.5051.02) • Phase Noise Measurement Application (software license)FSV3-K70M (1346.3376.02) • Vector Signal Analysis Application for Modulation Analysis of Signals with Multiple Modulations (R&S®FSV3-K70 Required) (software license)FSV3-K70P (1346.3382.02) • BER Measurement Application with PRBS Data (R&S®FSV3-K70 Required) (software license)FSV3-K30 (1330.5045.02) • Noise Figure and Gain Measurement Application (Noise Source Required, Preamplifier R&S®FSV3-B24 recommended, option R&S®FSV3-B28V required for noise sources with BNC power connector) (software license)
Rent

Availability confirmed on quote

Quote

Used

Availability confirmed on quote

Inquire

Looking For New?

This product may be available by an alternative finance solution.

5

Signal and spectrum analyzer 10 Hz to 44 GHz, WXGA display, capacitive touchscreen, enhanced RF

Product ID: P-162495

FSV3-B114 (1330.4910.02) • CPU board with enhanced computing power and memory size for fast analysis of complex digital modulation schemes (retrofit in service)FSV3-B24 (1330.4049.44) • RF Preamplifier, 30 dB 10 MHz to 43.5 GHz (retrofit in service)FSV3-B200 (1330.4132.02) • 200 MHz signal analysis bandwidth extension (retrofittable in service)FSV3-K40 (1330.5051.02) • Phase Noise Measurement Application (software license)FSV3-K70 (1330.5074.02) • Vector Signal Analysis Application for Modulation Analysis on Digital Modulated Single Carrier Signals (software license)FSV3-B11 (1330.3865.02) • Microwave preselector bypass for wide analysis bandwidths at center frequency > 7.5 GHz (software license)
Rent

Availability confirmed on quote

Quote

Used

Availability confirmed on quote

Inquire

Looking For New?

This product may be available by an alternative finance solution.

6

Signal and spectrum analyzer 10 Hz to 44 GHz, WXGA display, capacitive touchscreen, enhanced RF

Product ID: P-277436

FSV3-K30 (1330.5045.02) • Noise Figure and Gain Measurement Application (Noise Source Required, Preamplifier R&S®FSV3-B24 recommended, option R&S®FSV3-B28V required for noise sources with BNC power connector) (software license)FSV3-B4 (1330.3794.02) • OCXO, precision frequency reference, aging per year: 0.1 ppm, temp. drift: 0.1 ppm (5 to 45°C) (retrofit in service)FSV3-K70 (1330.5074.02) • Vector Signal Analysis Application for Modulation Analysis on Digital Modulated Single Carrier Signals (software license)FSV3-K40 (1330.5051.02) • Phase Noise Measurement Application (software license)FSV3-B24 (1330.4049.44) • RF Preamplifier, 30 dB 10 MHz to 43.5 GHz (retrofit in service)
Rent

Availability confirmed on quote

Quote

Used

Availability confirmed on quote

Inquire

Looking For New?

This product may be available by an alternative finance solution.

Showing 1 - 6 of 12 results

1
2
NOTE: If you’re in Canada, please use the ‘Quote’ option. Online Purchase is currently only available for US addresses, either via Card or Purchase Order.

How do I select a configuration?

You can scroll through configurations, search for options (separated by ;) above, and filter by Rental, New & Used. Or, let our experts guide you to the right solution by simply using ‘Quick Quote’ at the top of the page.

What’s the difference between Quote and Buy?

You can request a Quote for any item. Many New and Used items are also available to Buy online! You can mix your cart with items to Quote and items to Buy online. You’ll be able to complete the Quote and Buy checkout process at the same time. To check details, simply use ‘Quote’ and we’ll confirm everything. You can now buy either by card or by supplying a Purchase Order (P.O.). Note that P.O's will require verification and account set-up if you do not have an account.

Can I add extra items or make special requests?

Look out for the ‘Additional Information’ field when submitting your details. Use this for extra accessory or special calibration requests or for special delivery instructions. We’ll contact you when we receive your Order or Quote to fulfil.

* Prices & availability are subject to change without notice. All prices may vary due to shipping terms, sales tax, import duties, and exchange rates. Products may not be available in all locations. Any listed savings are based on the full list price of new instruments and are indicative depending on date of list; actual savings may vary based on option(s), configuration, currency exchange rates, and other factors. Warranty may vary by category or specific available product. All terms to be confirmed by full written quote or available to review in the Payment page when you buy online.
1 For Certified Pre-Owned equipment, units go into 23-step certification checks before shipping and we will confirm lead times.

Can't find what you are looking for?

Get in touch
Can't find what you are looking for?
loader
loader logo