Measure Signals Accurately
The R&S®MXO 5 has an incredibly low-noise signal path, powered by a channel-dedicated 12-bit ADC with no sample rate limitations. High definition mode (HD) enhances the vertical resolution to a remarkable 18 bit, insuring unwavering accuracy in every measurement. With ultra-low noise and a highly sensitive frontend, the offset voltage can be driven up to ±5 V at the highest sensitivity. Get precise results and greater versatility.
Keycode bandwidth upgrades mean that an in stock 350 MHz model can be instantly upgraded by the user to 500 MHz, 1 or 2 GHz
Responsive Deep Memory
R&S®MXO 5 Series oscilloscopes come with the industry’s deepest standard acquisition memory of 500 Mpoints per channel, for the highest sample rate capture of up to 200 ms of power up or power down sequences on eight channels. Get even longer recordings with the 1 Gpoints memory expansion.
Digital Triggering
The MXO-EP ASIC incorporates advanced digital triggering to evaluate ADC samples in the acquisition path in real time. Trigger on small events with vertical divisions of less than 0.0001 that no other oscilloscope can isolate. Choose your own trigger hysteresis. Apply digital filters to suppress noise for the most precise triggering available.
Other Key Features:
- Evolution in speed: Quick acquisitions with multiple channels, math functions and seamless spectrum measurements for minimal blind time with 21 ns rearm
- Unleash comprehensive spectrum analysis: Fast and pristine spectrum analysis and ability to run up to four analyses simultaneously
- Extensive memory capacity: Benefit from the deepest standard memory and up to 1 million waveform segments
- Precise in-event detection: Our digital trigger is flawless at 18-bit HD resolution with adjustable sensitivity for accurate triggering
- Uncompromised performance: A low noise floor and the highest vertical offset range of ±5 V at 0.5 mV/div for exceptional signal fidelity
- Setting new sensitivity standards: the industry most sensitive trigger down to 0.0001 div
- Leading trigger jitter performance: Best-in-class trigger jitter of less than 1 ps
| Key specifications | MXO54 |
| Bandwidth (MHz) | 350/500 MHz, 1 GHz and 2 GHz |
| Max. sample rate | 5 GSamples/s (interleaved)
2.5 GSamples/s (all channels)
|
| Analog channels | 4 |
| Digital channels | 16 standard (dedicated connector) |
| Acquisition rate | 4.5 million acquisitions/s per channel
18 million acquisitions/s on 4 channels
|
ADC resolution
Max. vertical resolution
| 12-bit ADC –all sample rates
18-bit in HD-mode
|
| Standard memory depth | 500 Mpoints per channel (Opt. upgrade to 1 Gpoints) |
| Segmented memory | Up to 1 million segments with 1 Mpoints capture |
| FFT speed | > 45K FFT/s |
| FFT capabilities | Log-log display, max/min-hold, peak-lists |
| Vertical noise floor | 130 µVrms at 1 mV/div, 2 GHz bandwidth |
| Vertical offset range | 5 V at 1 MΩcoupling |
| Arbitrary generator | 2 channels, 100 MHz with 625 MSamples/s |
| Digital trigger sensitivity | 0.0001 |
| Trigger hysteresis | User selectable |
| Trigger jitter | < 1 ps (rms) (meas.) |
| Time base accuracy | ±0.2 ppm |
| Display | 15.6" Full-HD display with capacitive touch |
| VESA mount support | Yes, with adapter R&S®MXO5-Z7 |
| Operating system | Linux |
| Upgradable | Bandwidth, protocol trigger and decode, arbitrary waveform generator, analysis capabilities |
| Warranty | 1 year |
